参数资料
型号: IS-L0107-IS15ABFP4RGB
厂商: NKK Switches
文件页数: 17/52页
文件大小: 0K
描述: BOARD LOGIC IS15ABFP4RGB & AT548
RoHS指令信息: AT, IS Series, Cert of Compliance
标准包装: 1
附件类型: 逻辑板
适用于相关产品: Standard SmartSwitch?
配用: 360-2332-ND - SMARTSWITCH STANDARD RED/GRN/BLU
IS-C1603 Intelligent Controller User
Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Each image can hold three lines of 6 characters in font 5x7 or two lines of 4 characters in font 7x10.
In font 7x10, the actual character picture is 10 pixel-rows high. It's padded by an extra pixel-row on the top
and bottom. These padded pixel-rows are clear (OFF) for "normal mode" command and filled (ON) for
"reverse mode" command to provide line spacing between character-rows. In font 5x7, the actual character
picture is 7 pixel-rows high. It's padded on the top only with a clear (OFF) pixel-row to provide line spacing
between character-rows.
Command to create 18 characters for three lines of font 5x7 in the specified address
This command creates the image data at a specified address with 3 lines of 18 characters of font 5x7.
command format:
27H
[Address]
[08H]
[ASCII string]
transmit format: (xxH) (xxAH) (xxAH) (xxH)
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[08H] is two byte and must be sent in ASCII HEX format (30 38).
[ASCII string] is 18 bytes and is a string of font 5x7 look-up table indexes. It must be sent in HEX format.
The controller responds with 61H and after processing the command 79H.
Command to display 6 characters for the first line of font 5x7 in the specified address
This command creates the image data at a specified address with the first line of 6 characters of font 5x7. No
changes made to the rest of the image.
command format:
27H
[Address]
[0EH]
[ASCII string]
transmit format: (xxH) (xxAH) (xxAH) (xxH)
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[0EH] is two byte and must be sent in ASCII HEX format (30 45).
[ASCII string] is 6 bytes and is a string of font 5x7 look-up table indexes. It must be sent in HEX format.
The controller responds with 61H and after processing the command 79H.
Command to display 6 characters for the second line of font 5x7 in the specified address
This command creates the image data at a specified address with the second line of 6 characters of font 5x7. No
changes made to rest of the image.
command format:
27H
[Address]
[0FH]
[ASCII string]
transmit format: (xxH) (xxAH) (xxAH) (xxH)
[Address] is one byte with value of 01H to FFH and must be sent in ASCII HEX format.
[0FH] is tw byte and must be sent in ASCII HEX format (30 46).
[ASCII string] is 6 bytes and is a string of font 5x7 look-up table indexes. It must be sent in HEX format.
The controller responds with 61H and after processing the command 79H.
IS-C1603 Intelligent Controller User Manual D.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 17 of 52
0110
相关PDF资料
PDF描述
MB2011SS1W30-CH SWITCH PUSHBUTTON SPDT 6A 125V
W1A2YC102MAT2A CAP ARRAY 2CH 1000PF 16V 0405
W1A2YA470KAT2A CAP ARRAY 2CH 47PF 16V 0405
3386S-1-254LF TRIMMER 250K OHM 0.5W TH
3386S-1-253LF TRIMMER 25K OHM 0.5W TH
相关代理商/技术参数
参数描述
IS-L0204-C 功能描述:交换机开发工具 Logic Board with 2 Standard RGB Sockets RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
IS-L0205-C 功能描述:交换机开发工具 Logic Board for two LCD 36X24 RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
IS-L0251-C 功能描述:交换机开发工具 Logic Board with 2 Stndrd Display Sckts RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
IS-L0271-C 功能描述:交换机开发工具 Logic Board with 2 Stndrd Compact Sckts RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度:
IS-L02A1-C 功能描述:交换机开发工具 Logic Board w/ 2 Hi Res Stnd Sw Sockets RoHS:否 制造商:NKK Switches 工具用于评估:Smart Switch - Compact RGB 工作电压: 最大工作温度: