- 您现在的位置：买卖IC网 > PDF目录360981 > IS41LV16100S 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE PDF资料下载
参数资料
| 型号： | IS41LV16100S |
| 英文描述： | 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| 中文描述： | 100万× 16（16兆）动态与江户页面模式内存 |
| 文件页数： | 4/20页 |
| 文件大小： | 533K |
| 代理商： | IS41LV16100S |
IS41C16100S
IS41LV16100S
4
Integrated Circuit Solution Inc.
DR004-0B
Functional Description
The IS41C16100S and IS41LV16100S is a CMOS DRAM
optimized for high-speed bandwidth, low power
applications. During READ or WRITE cycles, each bit is
uniquely addressed through the 16 address bits. These
are entered ten bits (A0-A9) at a time. The row address is
latched by the Row Address Strobe (
RAS
). The column
address is latched by the Column Address Strobe (
CAS
).
RAS
is used to latch the first ten bits and
CAS
is used the
latter ten bits.
The IS41C16100S and IS41LV16100S has two
CAS
controls,
LCAS
and
UCAS
. The
LCAS
and
UCAS
inputs
internally generates a
CAS
signal functioning in an iden-
tical manner to the single
CAS
input on the other 1M x 16
DRAMs. The key difference is that each
CAS
controls its
corresponding I/O tristate logic (in conjunction with
OE
and
WE
and
RAS
).
LCAS
controls I/O0 through I/O7 and
UCAS
controls I/O8 through I/O15.
The IS41C16100S and IS41LV16100S
CAS
function is
determined by the first
CAS
(
LCAS
or
UCAS
) transitioning
LOW and the last transitioning back HIGH. The two
CAS
controls give the IS41C16100S and IS41LV16100S both
BYTE READ and BYTE WRITE cycle capabilities.
Memory Cycle
A memory cycle is initiated by bring
RAS
LOW and it is
terminated by returning both
RAS
and
CAS
HIGH. To
ensures proper device operation and data integrity any
memory cycle, once initiated, must not be ended or
aborted before the minimum t
RAS
time has expired. A new
cycle must not be initiated until the minimum precharge
time t
RP
, t
CP
has elapsed.
Read Cycle
A read cycle is initiated by the falling edge of
CAS
or
OE
,
whichever occurs last, while holding
WE
HIGH. The
column address must be held for a minimum time specified
by t
AR
. Data Out becomes valid only when t
RAC
, t
AA
, t
CAC
and t
OEA
are all satisfied. As a result, the access time is
dependent on the timing relationships between these
parameters.
Write Cycle
A write cycle is initiated by the falling edge of
CAS
and
WE
, whichever occurs last. The input data must be valid
at or before the falling edge of
CAS
or
WE
, whichever
occurs first.
Refresh Cycle
To retain data, 1,024 refresh cycles are required in each
16 ms period. There are two ways to refresh the memory.
1. By clocking each of the 1,024 row addresses (A0
through A9) with
RAS
at least once every 16 ms. Any
read, write, read-modify-write or
RAS
-only cycle re-
freshes the addressed row.
2. Using a
CAS
-before-
RAS
refresh cycle.
CAS
-before-
RAS
refresh is activated by the falling edge of
RAS
,
while holding
CAS
LOW. In
CAS
-before-
RAS
refresh
cycle, an internal 10-bit counter provides the row
addresses and the external address inputs are ignored.
CAS
-before-
RAS
is a refresh-only mode and no data
access or device selection is allowed. Thus, the output
remains in the High-Z state during the cycle.
Self Refresh Cycle
The Self Refresh allows the user a dynamic refresh, data
retention mode at the extended refresh period of 128 ms.
i.e., 125 μs per row when using distributed CBR refreshes.
The feature also allows the user the choice of a fully static,
low power data retention mode. The optional Self Refresh
feature is initiated by performing a CBR Refresh cycle and
holding
RAS
LOW for the specified t
RAS
.
The Self Refresh mode is terminated by driving
RAS
HIGH
for a minimum time of t
RP
. This delay allows for the
completion of any internal refresh cycles that may be in
process at the time of the
RAS
LOW-to-HIGH transition.
If the DRAM controller uses a distributed refresh sequence,
a burst refresh is not required upon exiting Self Refresh.
However, if the DRAM controller utilizes a
RAS
-only or
burst refresh sequence, all 1,024 rows must be refreshed
within the average internal refresh rate, prior to the re-
sumption of normal operation.
Extended Data Out Page Mode
EDO page mode operation permits all 1,024 columns
within a selected row to be randomly accessed at a high
data rate.
In EDO page mode read cycle, the data-out is held to the
next
CAS
cycle’s falling edge, instead of the rising edge.
For this reason, the valid data output time in EDO page
mode is extended compared with the fast page mode. In
the fast page mode, the valid data output time becomes
shorter as the
CAS
cycle time becomes shorter. Therefore,
in EDO page mode, the timing margin in read cycle is
larger than that of the fast page mode even if the
CAS
cycle time becomes shorter.
In EDO page mode, due to the extended data function, the
CAS
cycle time can be shorter than in the fast page mode
if the timing margin is the same.
The EDO page mode allows both read and write opera-
tions during one
RAS
cycle, but the performance is
equivalent to that of the fast page mode in that case.
Power-On
After application of the V
CC
supply, an initial pause of
200 μs is required followed by a minimum of eight initial-
ization cycles (any combination of cycles containing a
RAS
signal).
During power-on, it is recommended that
RAS
track with
V
CC
or be held at a valid V
IH
to avoid current surges.
相关PDF资料 |
PDF描述 |
|---|---|
| IS41LV16100S-45KI | 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-45T | 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-45TI | 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-50K | 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-50KI | 1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IS41LV16100S-45K | 制造商:ICSI 制造商全称:Integrated Circuit Solution Inc 功能描述:1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-45KI | 制造商:ICSI 制造商全称:Integrated Circuit Solution Inc 功能描述:1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-45T | 制造商:ICSI 制造商全称:Integrated Circuit Solution Inc 功能描述:1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-45TI | 制造商:ICSI 制造商全称:Integrated Circuit Solution Inc 功能描述:1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
| IS41LV16100S-50K | 制造商:ICSI 制造商全称:Integrated Circuit Solution Inc 功能描述:1M x 16 (16-MBIT) DYNAMIC RAM WITH EDO PAGE MODE |
发布紧急采购，3分钟左右您将得到回复。