- 您现在的位置：买卖IC网 > PDF目录383121 > ISD2351 (Osram Opto Semiconductors GmbH) Sunlight Readability Contrast Measurements PDF资料下载
参数资料
| 型号： | ISD2351 |
| 厂商： | Osram Opto Semiconductors GmbH |
| 英文描述： | Sunlight Readability Contrast Measurements |
| 中文描述： | 日光可读性对比测量 |
| 文件页数： | 1/4页 |
| 文件大小： | 146K |
| 代理商： | ISD2351 |
www.infineon.com/opto 1-888-Infineon (1-888-463-4636)
OSRAM Opto Semiconductors GmbH & Co. OHG Regensburg, Germany
www.osram-os.com +49-941-202-7178
2000 Infineon Technologies Corp. Optoelectronics Division San Jose, CA
1
May 31, 2000-14
Introduction
Light emitting diode alphanumeric displays have had a long and
successful relationship with military and avionic equipment.
Applications with very high light ambients now are possible
because of advances in the efficiency of LEDs. Polarized filters
enhance the readability of LEDs by eliminating much of the ambi-
ent reflection from the LED die and the surrounding package.
Readability Criteria
An observer's ability to perceive the information from an alpha-
numeric display depends on two factors. These include font
and size of the message in relationship to the viewing position
and the optical contrast of the message to the surrounding
environment.
Optical contrast is the comparison of the brightness or sterance
(L) of the On/Off/LED to the brightness of the surrounding envi-
ronment. High readability results by optimizing the following
contrast ratios. The first ratio, C
1
ance, L
LEDon
, and the background stearance, L
when the OnLED is brighter than the surrounding area. Thus C
will be much greater than unity (1).
The next ratio, C
2
, involves the sterance ratio of the On,
L
LEDon
, and Off, L
LEDoff
, LED. C
2
is much greater than the L
LEDoff
greater than unity (1).
The optimal ratio of C3, involving OffLED to the background, is
achieved when the ratio is near zero. The OffLED should have
minimal contrast with the background.
, involves the OnLED stear-
B
, is optimized
1
is optimized when the L
, resulting in being much
LEDon
The equations for these three ratios are given below.
The U.S. military has established contrast ratios limits to satisfy
sunlight readability criteria. These criteria are published in,
”
Night Vision Goggle Lighting Specification.
are shown below:
C1—OnLED to Background
C2—OnLED to OffLED
C3—OffLED to Background
” The specifications
≥
≥
≤
2.0:1 Minimum
2.0:1 Minimum
0.25:1 Maximum
Optical Filtering
An LED, regardless of its brightness, has a difficult time com-
peting with the sterance of the sun. An LED display’s readabil-
ity can be greatly improved by using contrast enhancement
filters. The filter of choice is one that eliminates the interfer-
ence of the sun with the background of the display. A number
of filter vendors offer anti-reflection coated, circular polarized
(AR/CP), optically tinted bandpass and neutral density filters
which have proven very helpful in satisfying the sunlight read-
ability contrast requirements.
The display front surface and the areas surrounding the LEDs
have specular reflector characteristics. This reflective property
allows optimum contrast when used with a circular polarized fil-
ter with anti-reflective coating. See Table 1 for Filter Selection
Guide.
Sunlight Readability
Contrast Measurements for
the ISD2351 and ISD2353
Serial Input Small
Alphanumeric Display
Appnote 47
by Bob Krause
Ratio Equations
1) C
1
—OnLED to Background
L
B
2) C
2
—OnLED to OffLED
3) C
3
—OffLED to Background
C
1
L
B
–
-------------------------------
=
C
2
L
--------------------------------------------
L
–
LEDoff
=
C
3
L
---------------------------------------
L
–
B
=
相关PDF资料 |
PDF描述 |
|---|---|
| ISD2353 | Sunlight Readability Contrast Measurements |
| ISD2575X | Single-Chip Voice Record/Playback Devices 32-, 40-, 48-, 64-,60-,75,90-, and 120-Second Durations |
| ISD2590E | Single-Chip Voice Record/Playback Devices 32-, 40-, 48-, 64-,60-,75,90-, and 120-Second Durations |
| ISD2590T | Single-Chip Voice Record/Playback Devices 32-, 40-, 48-, 64-,60-,75,90-, and 120-Second Durations |
| ISD2590X | Single-Chip Voice Record/Playback Devices 32-, 40-, 48-, 64-,60-,75,90-, and 120-Second Durations |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISD2352 | 功能描述:LED 显示器和配件 5x7 Super Red 0.2", 4-CHARACTER RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube |
| ISD2353 | 功能描述:LED 显示器和配件 5x7 Hi-Eff Green 0.2", 4-CHARACTER RoHS:否 制造商:Avago Technologies 显示器类型:7 Segment 数位数量:2 字符大小:7.8 mm x 14.22 mm 照明颜色:Red 波长:628 nm 共用管脚:Common Anode 工作电压:2.05 V 工作电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 35 C 封装:Tube |
| ISD2353-29 | 制造商:OSRAM 功能描述: |
| ISD2-35-D | 制造商:Samtec Inc 功能描述:2MM DISCRETE WIRE INSULATOR - Bulk |
| ISD2360SYI | 功能描述:IC DIGITAL CHIPCORDER RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:* 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP（0.300"，7.62mm） 供应商设备封装:28-PDIP 其它名称:90-21300+000 |
发布紧急采购，3分钟左右您将得到回复。