- 您现在的位置：买卖IC网 > PDF目录384518 > ISD25120 (WINBOND ELECTRONICS CORP) ISD2560 PDF资料下载
参数资料
| 型号： | ISD25120 |
| 厂商： | WINBOND ELECTRONICS CORP |
| 英文描述： | ISD2560 |
| 中文描述： | ISD2560 |
| 文件页数： | 13/42页 |
| 文件大小： | 380K |
| 代理商： | ISD25120 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页
ISD2560/75/90/120
Publication Release Date: May 2003
- 13 -
Revision 1.0
M6 – Push-Button Mode
The ISD2500 series contain a Push-Button Operational Mode. The Push-Button Mode is used
primarily in very low-cost applications and is designed to minimize external circuitry and components,
thereby reducing system cost. In order to configure the device in Push-Button Operational Mode, the
two most significant address bits must be HIGH, and the M6 mode pin must also be HIGH. A device in
this mode always powers down at the end of each playback or record cycle after
CE
goes HIGH.
When this operational mode is implemented, three of the pins on the device have alternate
functionality as described in the table below.
TABLE 3: ALTERNATE FUNCTIONALITY IN PINS
Pin Name
Alternate Functionality in Push-Button Mode
CE
Start/Pause Push-Button (LOW pulse-activated)
PD
Stop/Reset Push-Button (HIGH pulse-activated)
EOM
Active-HIGH Run Indicator
CE (START/PAUSE)
In Push-Button Operational Mode,
CE
acts as a LOW-going pulse-activated START/PAUSE signal.
If no operation is currently in progress, a LOW-going pulse on this signal will initiate a playback or
record cycle according to the level on the P/
R
pin. A subsequent pulse on the CE pin, before an
EOM
is reached in playback or an overflow condition occurs, will pause the current operation, and
the address counter is not reset. Another
CE
pulse will cause the device to continue the operation
from the place where it is paused.
PD (STOP/RESET)
In Push-Button Operational Mode, PD acts as a HIGH-going pulse-activated STOP/RESET signal.
When a playback or record cycle is in progress and a HIGH-going pulse is observed on PD, the
current cycle is terminated and the address pointer is reset to address 0, the beginning of the
message space.
EOM
(RUN)
In Push-Button Operational Mode,
EOM
becomes an active-HIGH RUN signal which can be used to
drive an LED or other external device. It is HIGH whenever a record or playback operation is in
progress.
Recording in Push-Button Mode
1. The PD pin should be LOW, usually using a pull-down resistor.
相关PDF资料 |
PDF描述 |
|---|---|
| ISD2560 | ISD2560 |
| ISD2575 | ISD2560 |
| ISD2590 | ISD2560 |
| ISD2532E | SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION |
| ISD2532P | SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISD25120G | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Chip Voice Record/Playback Devices 60-, 75-, 90-, and 120-Second Durations |
| ISD25120P | 功能描述:IC MEM VOICE REC/PLAY 120S 28DIP RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD2500 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP（0.300"，7.62mm） 供应商设备封装:28-PDIP 其它名称:90-21300+000 |
| ISD25120PRODUCTS | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| ISD25120S | 功能描述:IC VOICE REC/PLAY 120SEC 28-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD2500 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP（0.300"，7.62mm） 供应商设备封装:28-PDIP 其它名称:90-21300+000 |
| ISD25120X | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Chip Voice Record/Playback Devices 60-, 75-, 90-, and 120-Second Durations |
发布紧急采购，3分钟左右您将得到回复。