参数资料
型号: ISD2548P
厂商: WINBOND ELECTRONICS CORP
元件分类: 音频合成
英文描述: SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
中文描述: 48 SEC, SPEECH SYNTHESIZER WITH RCDG, PDIP28
封装: 0.600 INCH, PLASTIC, DIP-28
文件页数: 11/42页
文件大小: 1356K
代理商: ISD2548P
ISD2532/40/48/64
Programming
The ISD2500 series is also ideal for playback-only applications, where single or multiple messages
are referenced through buttons, switches, or a microcontroller. Once the desired message
configuration is created, duplicates can easily be generated via a gang programmer.
7.2. O
PERATIONAL
M
ODES
The ISD2500 series is designed with several built-in Operational Modes that provide maximum
functionality with minimum external components. These modes are described in details as below. The
Operational Modes are accessed via the address pins and mapped beyond the normal message
address range. When the two Most Significant Bits (MSB), A7 and A8, are HIGH, the remaining
address signals are interpreted as mode bits and not as address bits. Therefore, Operational Modes
and direct addressing are not compatible and cannot be used simultaneously.
There are two important considerations for using Operational Modes. First, all operations begin initially
at address 0 of its memory. Later operations can begin at other address locations, depending on the
Operational Mode(s) chosen. In addition, the address pointer is reset to 0 when the device is changed
from record to playback, playback to record (except M6 mode), or when a Power-Down cycle is
executed.
Second, Operational Modes are executed when
CE
goes LOW. This Operational Mode remains in
effect until the next LOW-going
CE
signal, at which point the current mode(s) are sampled and
executed.
TABLE 2: OPERATIONAL MODES
Mode
[1]
Function
Typical Use
Jointly Compatible
[2]
M0
Message cueing
Fast-forward through messages
M4, M5, M6
M1
Delete
EOM
markers
Position
EOM
marker at the end of
the last message
M3, M4, M5, M6
M2
Not applicable
Reserved
N/A
M3
Looping
Continuous playback from Address 0
M1, M5, M6
M4
Consecutive
addressing
Record/playback multiple
consecutive messages
M0, M1, M5
M5
CE
level-activated
Allows message pausing
M0, M1, M3, M4
M6
Push-button control
Simplified device interface
M0, M1, M3
[1]
Besides mode pin needed to be “1”, A7 and A8 pin are also required to be “1” in order to enter into the related operational
mode.
[2]
Indicates additional Operational Modes which can be used simultaneously with the given mode.
Publication Release Date: June 2003
- 11 -
Revision 1.0
相关PDF资料
PDF描述
ISD2548X SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2564P SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2564X SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2540 Single-Chip Voice Record/Playback Device(Single-chip Durations of 40 seconds)(单片的录音/录音重放器(一片信息存储持续时间40秒))
ISD2532 Single-Chip Voice Record/Playback Device(Single-chip Durations of 32 seconds)(单片的录音/录音重放器(一片信息存储持续时间32秒))
相关代理商/技术参数
参数描述
ISD2548PRODUCTS 制造商:未知厂家 制造商全称:未知厂家 功能描述:
ISD2548S 功能描述:IC VOICE REC/PLAY 48SEC 28-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD2500 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD2548SY 功能描述:IC MEM VOICE REC/PLAY 48S 28SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD2500 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD2548X 制造商:WINBOND 制造商全称:Winbond 功能描述:SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2560 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Chip Voice Record/Playback Devices 32-, 40-, 48-, 64-,60-,75,90-, and 120-Second Durations