参数资料
| 型号： | ISL23415WFUZ-TK |
| 厂商： | Intersil |
| 文件页数： | 7/20页 |
| 文件大小： | 0K |
| 描述： | IC DGTL POT 256POS 10K 10MSOP |
| 产品培训模块： | Solutions for Industrial Control Applications |
| 标准包装： | 1,000 |
| 系列： | XDCP™ |
| 接片： | 256 |
| 电阻（欧姆）： | 10k |
| 电路数： | 1 |
| 温度系数： | 标准值 175 ppm/°C |
| 存储器类型： | 易失 |
| 接口： | 4 线 SPI（芯片选择） |
| 电源电压： | 1.2 V ~ 5.5 V，1.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 带卷 (TR) |
ISL23415
15
FN7780.1
August 16, 2011
Write Operation
A write operation to the ISL23415 is a two or more bytes
operation. It requires first, the CS transition from HIGH-to-LOW.
Then the host sends a valid Instruction Byte, followed by one or
more Data Bytes to the SDI pin. The host terminates the write
operation by pulling the CS pin from LOW-to-HIGH. Instruction is
executed on the rising edge of CS (see Figure 27).
Read Operation
A Read operation to the ISL23415 is a four byte operation. It
requires first, the CS transition from HIGH-to-LOW. Then the host
sends a valid Instruction Byte, followed by a “dummy” Data Byte,
NOP Instruction Byte and another “dummy” Data Byte to SDI pin.
The SPI host receives the Instruction Byte (instruction code +
register address) and requested Data Byte from SDO pin on the
rising edge of SCK during third and fourth bytes, respectively. The
host terminates the read by pulling the CS pin from LOW-to-HIGH
(see Figure 28).
TABLE 4. INSTRUCTION SET
INSTRUCTION SET
OPERATION
I2
I1
I0
R4
R3
R2
R1
R0
0
XXX
XX
NOP
0
1
XXX
XX
ACR READ
0
1
XXX
XX
ACR WRTE
1
0
R4R3R2R1R0
WRi or ACR READ
1
0
R4R3R2R1R0
WRi or ACR WRTE
Where X means “do not care”.
FIGURE 27. TWO BYTE WRITE SEQUENCE
CS
SCK
SDI
SDO
WR INSTRUCTION
DATA BYTE
1
3
4
5
7
8
9
1011
1213141516
26
ADDR
FIGURE 28. FOUR BYTE READ SEQUENCE
CS
SCK
SDI
SDO
RD
ADDR
NOP
RD
ADDR
READ DATA
1
8
16
24
32
相关PDF资料 |
PDF描述 |
|---|---|
| ISL23418WFUZ-TK | IC DGTL POT 1CH 10K 10MSOP |
| ISL23425UFVZ-T7A | IC DGTL POT DUAL 50K 14TSSOP |
| ISL23428UFVZ | IC DGTL POT 2CH 50K 14TSSOP |
| ISL23445WFVZ-T7A | IC DGTL POT QUAD 10K 20TSSOP |
| ISL23448WFVZ | IC DGTL POT 4CH 10K 20TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL23418 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Single, 128-Tap, Low Voltage Digitally Controlled Potentiometer (XDCPa?￠) |
| ISL23418TFRUZ-T7A | 功能描述:数字电位计 IC 128 TAPVOLATILE SPI SNG RNG IND DCP 10LD RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| ISL23418TFRUZ-TK | 功能描述:数字电位计 IC 128 TAP VOLATILE SPI SINGLE DCP 10LD RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| ISL23418TFUZ | 功能描述:数字电位计 IC 128 TAP VOLATILE SPI SINGLE DCP 10LD RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| ISL23418TFUZ-T7A | 功能描述:数字电位计 IC 128 TAPVOLATILE SPI SNG RNG IND DCP 10LD RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。