参数资料
型号: ISL28114FHZ-T7
厂商: Intersil
文件页数: 7/23页
文件大小: 0K
描述: IC OPAMP GP RRIO 5MHZ SOT23-5
标准包装: 3,000
放大器类型: 通用
电路数: 1
输出类型: 满摆幅
转换速率: 2.5 V/µs
增益带宽积: 5MHz
电流 - 输入偏压: 3pA
电压 - 输入偏移: 500µV
电流 - 电源: 300µA
电流 - 输出 / 通道: 31mA
电压 - 电源,单路/双路(±): 1.8 V ~ 5.5 V
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: SC-74A,SOT-753
供应商设备封装: SOT-23-5
包装: 带卷 (TR)
ISL28114, ISL28214, ISL28414
15
FN6800.8
November 15, 2012
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to Web to make sure you
have the latest Rev.
DATE
REVISION
CHANGE
October 26, 2012
FN6800.8
Added SOT23-8 package on page 1 to description and features.
Ordering Information on page 2 - Added ISL28214FHZ parts and Note 5 reference.
Added Lead Finish Note to Ordering information for 8 LD SOT-23 parts.
Thermal Information on page 4 - Added 8 LD SOT-23 package with Tja and Tjc
Added P8.064 POD on page 23.
April 13, 2012
FN6800.7
Changed the low supply current in “Features” and description on page 1 from 360A to 390A.
Removed ISL28114FEV1Z-T7 Coming Soon parts from “Ordering Information” on page 2.
Removed applicable pinout from page 2.
On page 4, changed MIN/MAX limits for “VOS” at 25°C from -5/5mV to -4/4mV.
On page 4, changed MIN/MAX limits for “VOS” at -40°C to 125°C from -6/6mV to -5/5mV.
On page 4, changed “TCVOS” TYP from 2V/°C to 5V/°C.
On page 4, changed MAX limit for “IS” MAX at 25°C from 360A to 390A.
On page 4, changed MAX limit for “IS” MAX at -40°C to 125°C from 400A to 475A.
January 3, 2012
FN6800.6
May 18, 2011
FN6800.5
- On page 3, Pin Descriptions: Circuit 3 diagram, removed anti-parallel diodes from the IN+ to IN-
terminals.
- On page 4, Absolute Maximum Ratings: changed Differential Input Voltage from "0.5V" to "V- -
0.5V to V+ + 0.5V"
- On page 4, updated CMRR and PSRR parameters in Electrical Specifications table with test
condition specifying -40°C to 125°C typical parameter.
- On page 5, updated Note 8, referenced in MIN and MAX column headings of Electrical
Specifications table, from "Parameters with MIN and/or MAX limits are 100% tested at +25°C,
unless otherwise specified. Temperature limits established by characterization and are not
production tested." to new standard "Compliance to datasheet limits is assured by one or more
methods: production test, characterization and/or design."
- On page 9, under “Input ESD Diode Protection,” removed “They also contain back to-back
diodes across the input terminals.” Removed “Although the amplifier is fully protected, high
input slew rates that exceed the amplifier slew rate (±2.5V/s) may cause output distortion.”
- On page 9, Figure 19: updated circuit schematic by removing back-to-back input protection
diodes.
- On page 11 replaced SPICE schematic (Figure 21)
- On page 12 replaced SPICE Netlist (Figure 22)
- On page 13 replaced Figure 24
- On page 14 replaced Figure 32
September 23, 2010
FN6800.4
Added new SC70 pinout package extension as follows:
Added to Related Literature on page 1 “See AN1547
for “ISL28414TSSOPEVAL1Z Evaluation
Board User’s Guide”.
Added to ordering information ISL28114FEV1Z-T7 and ISL28114FEV1Z-T7A and Evaluation
boards.
Added to Pin Configurations new pinout for ISL28114FEV1Z.
Added in Pin Descriptions ISL28114FEV1Z SC70 pin description column.
July 28, 2010
Changed Note 7 on page page 4 from “For
θJC, the “case temp” location is the center of the
exposed metal pad on the package underside.” to
“For
θJC, the “case temp” location is taken at the package top center.”
May 13, 2010
Changed package outline drawing from MDP0038 to P5.064A on page 2 and page 18.
MDP0038 package contained 2 packages for both the 5 and 6 Ld SOT-23. MDP0038 was
obsoleted and the packages were separated and made into 2 separate package outline
drawings; P5.064A and P6.064A. Changes to the 5 Ld SOT-23 were to move dimensions from
table onto drawing, add land pattern and add JEDEC reference number.
Added Note 5 to “Ordering Information” on page 2.
December 16, 2009
FN6800.3
Removed “Coming Soon” from MSOP package options in the “Ordering Information” on page 2.
Updated the Theta JA for the MSOP package option from 170°C/W to 180°C/W on page 4.
相关PDF资料
PDF描述
XG8W-5044 PLUG 50POS DOUBLE ROW RIGHT ANGL
XG8W-5031 PLUG 50POS DOUBLE ROW STRAIGHT
XG8W-3434 PLUG 34POS DOUBLE ROW RIGHT ANGL
62718-2 CONN RCPT FLG FAST 18-22AWG .250
76382-318 CONN HEADER 18POS .100" R/A GOLD
相关代理商/技术参数
参数描述
ISL28114FHZ-T7A 功能描述:放大器 IC 开发工具 ISL28114FHZ SINGLE GEN PURPSE MIPR RRIO RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V
ISL28114SOT23EVAL1Z 功能描述:放大器 IC 开发工具 ISL28114 EVAL BRD 1 RHS CMPL5LD RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V
ISL28117 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:40V Precision Low Power Operational Amplifiers
ISL28117_10 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:40V Precision Low Power Operational Amplifiers
ISL28117_11 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:40V Precision Low Power Operational Amplifiers