参数资料
| 型号： | ISL28210FBZ |
| 厂商： | Intersil |
| 文件页数： | 8/23页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP JFET 12.5MHZ DUAL 8SOIC |
| 产品培训模块： | Solutions for Industrial Control Applications |
| 标准包装： | 97 |
| 放大器类型： | J-FET |
| 电路数： | 2 |
| 转换速率： | 20 V/µs |
| 增益带宽积： | 12.5MHz |
| 电流 - 输入偏压： | 2pA |
| 电压 - 输入偏移： | 300µV |
| 电流 - 电源： | 2.55mA |
| 电流 - 输出 / 通道： | 50mA |
| 电压 - 电源，单路/双路(±)： | 9 V ~ 40 V，±4.5 V ~ 20 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 管件 |
ISL28110, ISL28210
16
FN6639.3
November 29, 2012
Power Dissipation
It is possible to exceed the +150°C maximum junction
temperatures under certain load and power supply conditions. It
is therefore important to calculate the maximum junction
temperature (TJMAX) for all applications to determine if power
supply voltages, load conditions, or package type need to be
modified to remain in the safe operating area. These parameters
are related using Equation 1:
where:
PDMAXTOTAL is the sum of the maximum power dissipation of
each amplifier in the package (PDMAX)
where:
TMAX = Maximum ambient temperature
θJA = Thermal resistance of the package
PDMAX = Maximum power dissipation of 1 amplifier
VS = Total supply voltage
IqMAX = Maximum quiescent supply current of 1 amplifier
VOUTMAX = Maximum output voltage swing of the application
RL = Load resistance
ISL28110 and ISL28210 SPICE Model
the net list for the SPICE model. The model is a simplified version
of the actual device and simulates important AC and DC
parameters. AC parameters incorporated into the model are: 1/f
and flatband noise voltage, Slew Rate, CMRR, Gain and Phase. The
DC parameters are IOS, total supply current and output voltage
swing. The model uses typical parameters given in the “Electrical
Specifications” Table beginning on page 4. The AVOL is adjusted
for 125dB with the dominant pole at 7Hz. The CMRR is set 120dB,
f = 280kHz. The input stage models the actual device to present
an accurate AC representation. The model is configured for
ambient temperature of +25°C.
results for the Noise Voltage, Closed Loop Gain vs Frequency,
Small Signal 0.1V Step, Large Signal 5V Step Response, Open
Loop Gain Phase, CMRR and Output Voltage Swing for ±5V and
±15V supplies.
LICENSE STATEMENT
The information in this SPICE model is protected under the
United States copyright laws. Intersil Corporation hereby grants
users of this macro-model hereto referred to as “Licensee”, a
nonexclusive, nontransferable licence to use this model as long
as the Licensee abides by the terms of this agreement. Before
using this macro-model, the Licensee should read this license. If
the Licensee does not accept these terms, permission to use the
model is not granted.
The Licensee may not sell, loan, rent, or license the macro-model,
in whole, in part, or in modified form, to anyone outside the
Licensee’s company. The Licensee may modify the macro-model
to suit his/her specific applications, and the Licensee may make
copies of this macro-model for use within their company only.
This macro-model is provided “AS IS, WHERE IS, AND WITH NO
WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED,
INCLUDING BUY NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.”
In no event will Intersil be liable for special, collateral, incidental,
or consequential damages in connection with or arising out of
the use of this macro-model. Intersil reserves the right to make
changes to the product and the macro-model without prior
notice.
FIGURE 45. UNITY-GAIN THD+N vs OUTPUT VOLTAGE vs
TEMPERATURE AT VS = ±5V FOR 600Ω LOAD
0.0001
0.001
0.01
0.1
1
0
1
2
345
67
8
9
10
VP-P (V)
THD+N
(%)
VS = ±5V
RL = 600Ω
AV = 1
+25°C
0°C
-40°C
+125°C
+85°C
TJMAX
TMAX θJAxPDMAXTOTAL
+
=
(EQ. 1)
PDMAX
VS IqMAX VS
(
- VOUTMAX)
VOUTMAX
RL
----------------------------
×
+
×
=
(EQ. 2)
相关PDF资料 |
PDF描述 |
|---|---|
| ISL28217FUZ | IC OPAMP PREC 1.5MHZ DL LP 8MSOP |
| ISL28233IUZ-T7 | IC OPAMP GP R-R 400KHZ LN 8MSOP |
| ISL28236FBZ-T7 | IC OPAMP RRIO DUAL 5MHZ 8-SOIC |
| ISL28266FUZ | IC OPAMP RRIO CURRENT 39UA 8MSOP |
| ISL28268FUZ-T7 | IC OP AMP DUAL RRIO 34UA 8-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL28210FBZ-T13 | 功能描述:IC OPAMP JFET 12.5MHZ DUAL 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:75 系列:MicroAmplifier™ 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.03 V/µs 增益带宽积:100kHz -3db带宽:- 电流 - 输入偏压:1pA 电压 - 输入偏移:60µV 电流 - 电源:20µA 电流 - 输出 / 通道:5mA 电压 - 电源，单路/双路(±):2.3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:管件 |
| ISL28210FBZ-T7 | 功能描述:IC OPAMP JFET 12.5MHZ DUAL 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:75 系列:MicroAmplifier™ 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.03 V/µs 增益带宽积:100kHz -3db带宽:- 电流 - 输入偏压:1pA 电压 - 输入偏移:60µV 电流 - 电源:20µA 电流 - 输出 / 通道:5mA 电压 - 电源，单路/双路(±):2.3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:管件 |
| ISL28210FBZ-T7A | 功能描述:IC OPAMP JFET 12.5MHZ DUAL 8SOIC RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:350 V/µs 增益带宽积:180MHz -3db带宽:320MHz 电流 - 输入偏压:12.5µA 电压 - 输入偏移:800µV 电流 - 电源:15mA 电流 - 输出 / 通道:85mA 电压 - 电源，单路/双路(±):2.5 V ~ 12.6 V，±1.25 V ~ 6.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MSOP 包装:带卷 (TR) |
| ISL28210FRTBZ | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Precision Low Noise JFET Operational Amplifiers |
| ISL28210FRTZ | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Precision Low Noise JFET Operational Amplifiers |
发布紧急采购，3分钟左右您将得到回复。