参数资料
| 型号： | ISL32273EFBZ-T |
| 厂商： | Intersil |
| 文件页数： | 6/22页 |
| 文件大小： | 0K |
| 描述： | IC RCVR RS485/422 QD ESD 16SOIC |
| 产品培训模块： | Solutions for Industrial Control Applications |
| 标准包装： | 2,500 |
| 类型： | 接收器 |
| 驱动器/接收器数： | 0/4 |
| 规程： | RS422，RS485 |
| 电源电压： | 3 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-SOIC |
| 包装： | 带卷 (TR) |
14
FN7529.1
March 14, 2013
both ends. Stubs connecting a transmitter or receiver to
the main cable should be kept as short as possible.
Low Power Shutdown Mode
These BiCMOS receivers all use a fraction of the power
required by their bipolar counterparts, but they also
include a shutdown (SHDN) feature that reduces the
already low quiescent ICC to a microamp trickle. These
devices enter shutdown only when all four receivers
disable (see “Truth Tables” on page 4) for at least 600ns.
The ISL32X73E types enter SHDN whenever EN is low
and EN is high. ISL32X75E types enter SHDN only if both
EN12 and EN34 are low. Note that the ISL32X75E enable
times increase significantly when enabling from the
SHDN condition.
The ISL32X77E enter the low power SHDN mode if
SHDNEN is high, and if all four Rx are disabled for at
least 600ns. This is accomplished by driving EN low and
EN high, or by driving all four ENX inputs low. Enable
times increase if the IC was in SHDN, so if enable time is
more important than SHDN supply current, tying the
SHDNEN pin low defeats the low power SHDN feature. In
this mode, the supply current drops to 1mA to 2mA when
all four Rx are disabled, but the enable time of any Rx
remains below 200ns.
Remember that all enable pins have pull-up resistors on
them, so each pin that is low during SHDN adds up to
15A to the SHDN supply current. The SHDN supply
current entries in the “Electrical Specifications” table on
page 9 include the resistor currents of the pins indicated
to be in the low state.
ISL32173E, ISL32175E, ISL32177E, ISL32273E, ISL32275E, ISL32277E
相关PDF资料 |
PDF描述 |
|---|---|
| MX7576JP+ | IC ADC 8BIT MPU COMP 20-PLCC |
| VI-2WN-MX-F1 | CONVERTER MOD DC/DC 18.5V 75W |
| ISL32177EIRZ-T | IC RCVR RS485/422 QD ESD 24QFN |
| MAX1204BEAP+T | IC ADC 10BIT 8CH 20-SSOP |
| VI-2WM-MX-F4 | CONVERTER MOD DC/DC 10V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL32273EFVZ | 功能描述:IC RCVR RS485/422 QD ESD 16TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL32273EFVZ-T | 功能描述:IC RCVR RS485/422 QD ESD 16TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL32273EIBZ | 功能描述:IC RCVR RS485/422 QD ESD 16SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL32273EIBZ-T | 制造商:Intersil Corporation 功能描述:PB-FREE 16LD SOIC +/-15KV ESD 20 MBPS 3.0V TO 5.5V 85C RS-48 - Tape and Reel 制造商:Intersil 功能描述:16LD +/-15KV ESD 20 MBPS 3 0V TO 5 5V |
| ISL32273EIVZ | 功能描述:IC RCVR RS485/422 QD ESD 16TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。