- 您现在的位置：买卖IC网 > PDF目录383129 > ISL36356A-APDK (Intersil Corporation) PRISM 11Mbps Wireless Local Area Network Access Point PDF资料下载
参数资料
| 型号： | ISL36356A-APDK |
| 厂商： | Intersil Corporation |
| 英文描述： | PRISM 11Mbps Wireless Local Area Network Access Point |
| 中文描述： | 棱镜11Mbps的无线局域网接入点 |
| 文件页数： | 6/7页 |
| 文件大小： | 150K |
| 代理商： | ISL36356A-APDK |
6
IEEE802.11 International Agreement and
Frequency Assignments
The IEEE802 LAN committee has forged an international
agreement providing for wireless data communication
standards for the frequency range of 2.4GHz to 2.4835GHz,
as allocated by the FCC in the USA, and in the 2.400GHz to
2.497GHz frequency range, as specified by the regulatory
authority in Japan. These standards are designed to focus
the industry to develop highly integrated, low cost,
interoperable WLAN equipment, of which the ISL36356A-
APDK is a prime example.
In the U.S., there are 11 channels specified by the FCC in
the 2.412GHz to 2.462GHz range. In Japan, channel 14 at
2.484GHz is authorized under ARIB STD-33 and channels
1–13 are authorized under ARIB STD-T66. The ETSl
(European) regulatory body conforms to the USA (FCC)
channel assignments with the exception that channels 12
and 13 are also allowed. Some countries in Europe, notably
France have unique channel restrictions.
Although information contained in Table 3 is deemed to be
accurate, local regulatory authorities should be consulted
before using such equipment.
The available channels of operation in the 2.4GHz to
2.4835GHz and 2.471GHz to 2.497GHz ranges are as follows:
The ISL36356A-APDK is shipped with FCC-compliant
firmware. In order to ensure regulatory-compliant channel
usage in a particular country, special geographic-specific
firmware is available for customer production assemblies
which restricts channel usage. Examples include ETSI-
compliant firmware, etc. For Japan, a Japan filter is
implemented to comply with ARIB STD-33. Since the end
user does not have the ability to alter this firmware,
regulatory compliance is ensured.
Agency and Regulatory Body Approvals
The WLAN Access Point will comply to the standards shown
in Table 4:
FCC Information to User
This product does not contain any user serviceable
components and is to be used with approved antennas only.
Any product changes or modifications will invalidate all
applicable regulatory certifications and approvals.
FCC Electronic Emission Notices
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired
operation.
FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
TABLE 3. IEEE802.11 CHANNELS
CHANNEL
NUMBER
CHANNEL
FREQUENCY
GEOGRAPHIC
USAGE
1
2412MHz
US, CA, EU, JP
2
2417MHz
US, CA, EU, JP
3
2422MHz
US, CA, EU, JP
4
2427MHz
US, CA, EU, JP
5
2432MHz
US, CA, EU, JP
6
2437MHz
US, CA, EU, JP
7
2442MHz
US, CA, EU, JP
8
2447MHz
US, CA, EU, JP
9
2452MHz
US, CA, EU, JP
10
2457MHz
US, CA, EU, JP, FR
11
2462MHz
US, CA, EU, JP, FR
12
2467MHz
EU, FR, JP
13
2472MHz
EU, FR, JP
14
2484MHz
JP (see note)
KEY: US = United States, CA = Canada, EU = European countries
(except France), FR = France, JP = Japan
NOTE: channel 14 operation in Japan requires Japan filter to be
enabled in order to comply with ARIB STD-33.
TABLE 4. COMPLIANCE STANDARDS
COUNTRY
APPROVAL
NOTES
USA
FCC part 15,
Sec. 15.247,
Sec. 15.107 and 15.109
Grant obtained
Canada
ICAN RSS-210
Designed for
compliance
EU & EFTA EN 60950
EN 301 489-1 V1.2.1 (2000-08)
EN 301 489-17 V1.1.1 (2000-09)
EN 300 328 Part 1 V1.2.2 (2000-07)
EN 300 328 Part 2 V1.1.1 (2000-07)
Certified under
RTTE directive
Japan
ARIB STD-T66
ARIB STD-33
Designed for
compliance
ISL36356A-APDK
相关PDF资料 |
PDF描述 |
|---|---|
| ISL3690IR-TK | Dual Band Direct Conversion Transceiver |
| ISL3690IR | Dual Band Direct Conversion Transceiver |
| ISL3690 | DIODE ZENER SINGLE 1000mW 7.5Vz 34mA-Izt 0.05 10uA-Ir 5Vr DO41-GLASS 5K/REEL |
| ISL37106P-CD | Circular Connector; MIL SPEC:MIL-C-26482, Series I, Solder; Body Material:Aluminum; Series:PT06; Number of Contacts:8; Connector Shell Size:16; Connecting Termination:Solder; Circular Shell Style:Straight Plug; Body Style:Straight |
| ISL37106P-EVAL | Circular Connector; MIL SPEC:MIL-C-26482, Series I, Solder; Body Material:Aluminum; Series:PT06; Number of Contacts:8; Connector Shell Size:16; Connecting Termination:Solder; Circular Shell Style:Straight Plug; Body Style:Straight |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL36356A-APDK-EVAL | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:PRISM 11Mbps Wireless Local Area Network Access Point |
| ISL36411 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Quad Lane Extender |
| ISL36411DRZ-EVALZ | 功能描述:EVAL BOARD FOR ISL36411DRZ RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板 |
| ISL36411DRZ-T7 | 功能描述:接口 - 专用 ISL54100AHDMI EVAL BRD RHS CMPL 12 8LD RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
| ISL36411DRZ-TS | 功能描述:接口 - 专用 ISL54065 EVALRD 1 SOCKET DGHTR BRD- 1 RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59 |
发布紧急采购，3分钟左右您将得到回复。