- 您现在的位置：买卖IC网 > PDF目录10554 > ISL45042IR (Intersil)IC LCD MODULE CALIBRATOR 8-DFN PDF资料下载
参数资料
| 型号： | ISL45042IR |
| 厂商： | Intersil |
| 文件页数： | 7/9页 |
| 文件大小： | 0K |
| 描述： | IC LCD MODULE CALIBRATOR 8-DFN |
| 标准包装： | 100 |
| 类型： | 校准器 |
| 应用： | LCD 显示器 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-WDFN 裸露焊盘 |
| 供应商设备封装： | 8-TDFN（3x3） |
| 包装： | 管件 |
7
FN6072.9
April 13, 2011
Power Supply Sequence
The recommended power supply sequencing is shown in
Figure 6. When applying power, VDD should be applied
before or at the same time as AVDD. The minimum time for
tVS is 0s. When removing power, the sequence of VDD and
AVDD is not important. Do not remove VDD or AVDD within
100ms of the start of the EEPROM programming cycle.
Removing power before the EEPROM programming cycle is
completed may result in corrupted data in the EEPROM.
Verifying the Programmed Value
The following sequence can be used to verify the
programmed value without having to sequence the VDD
supply. To verify the programmed value, follow the following
steps. The ISL45042 will read memory contents and be set
to that value when the CE pin is grounded.
1. Power-up the ISL45042.
2. CE pin = VDD.
3. Change counter value with CTL pin to desired value.
4. CTL = more than 4.9V and 200ms. Counter value
programmed.
5. Change the counter value with CTL pin to a different
value.
6. CE pin = Ground.
7. Check that the output value is the one programmed in
Step 4.
Generating VDD and CE supply from a Larger
Voltage Source
The CE pin has an internal pull-down resistor (see
400k
Ω to 5MΩ. If your design is using a resistor divider
network to generate the 3.3V supply (for both VDD and CE to
enable programming) from a larger voltage source, the
400k
Ω (worst case) resistor needs to be taken into account
as a parallel resistance when the CE pin is connected to this
source. Another design concern is to be able to provide
enough supply current during programming. The ISL45042
draws about 2mA during this process. Recommended
resistor values are shown in Figure 7. This design will result
in an additional 0.83mA quiescent current flowing through
resistors RA and RB.
FIGURE 6. POWER SUPPLY SEQUENCE
VDD
AVDD
tVS
FIGURE 7. APPLICATION GENERATING VDD AND VCE
VOLTAGES
VCC = 5V
SCHMITT
TRIGGER
CE LOGIC
RINTERNAL = 400kΩ to 5MΩ
RA
RB
2k
Ω
4k
Ω
ISL45042
CE
VCE
ISL45042
相关PDF资料 |
PDF描述 |
|---|---|
| PT02E-16-8P | CONN RCPT 8 POS BOX MNT W/PINS |
| VE-B5W-IV-F4 | CONVERTER MOD DC/DC 5.5V 150W |
| PT00E-10-6P | CONN RECEPT 6POS W/PINS SOLDER |
| VI-JVL-MY-F1 | CONVERTER MOD DC/DC 28V 50W |
| VE-B5V-IV-F3 | CONVERTER MOD DC/DC 5.8V 150W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL45042IR-T | 功能描述:IC LCD MODULE CALIBRATOR 8-DFN RoHS:否 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
| ISL45042IRZ | 功能描述:LCD 驱动器 LCD MOD CALIBRATOR 8LD 3X3 THIN RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| ISL45042IRZ-T | 功能描述:LCD 驱动器 LCD MOD CALIBRATOR 8LD 3X3 THIN RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| ISL45042IRZ-TK | 制造商:Intersil Corporation 功能描述:LCD DRVR 2.6V TO 3.6V 8TDFN - Tape and Reel 制造商:Intersil 功能描述:LCD MOD CALIBRATOR 8LD 3X3 THIN |
| ISL45043IRZ | 功能描述:IC DRIVER FOR SAMSUNG 10-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 显示器驱动器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 显示器类型:真空荧光 (VF) 配置:5 x 7（矩阵） 接口:串行 数字或字符:- 电流 - 电源:3.5mA 电源电压:2.7 V ~ 3.6 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:16-SSOP（0.154"，3.90mm 宽） 供应商设备封装:16-QSOP 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。