- 您现在的位置：买卖IC网 > PDF目录383141 > ISL6152CBZA-T (INTERSIL CORP) Negative Voltage Hot Plug Controller PDF资料下载
参数资料
| 型号： | ISL6152CBZA-T |
| 厂商： | INTERSIL CORP |
| 元件分类： | 电源管理 |
| 英文描述： | Negative Voltage Hot Plug Controller |
| 中文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14 |
| 封装： | LEAD FREE, PLASTIC, MS-012-AB, SOIC-14 |
| 文件页数： | 1/23页 |
| 文件大小： | 452K |
| 代理商： | ISL6152CBZA-T |
1
FN9086.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
Intersil and Design is a registered trademark of Intersil Americas Inc.
Intellitrip is a trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002, 2004, All Rights Reserved
ISL6142, ISL6152
Negative Voltage Hot Plug Controller
The ISL6142/52 are 14 pin, negative voltage hot plug controllers
that allow a board to be safely inserted and removed from a live
backplane. Inrush current is limited to a programmable value by
controlling the gate voltage of an external N-channel pass
transistor. The pass transistor is turned off if the input voltage is
less than the Under-Voltage threshold, or greater than the Over-
Voltage threshold. The PWRGD/PWRGD outputs can be used to
directly enable a power module. When the Gate and DRAIN
voltages are both considered good the output is latched in the
active state.
The IntelliTrip
TM
electronic circuit breaker and programmable
current limit features protect the system against short circuits.
When the Over-Current threshold is exceeded, the output current
is limited for a time-out period before the circuit breaker trips and
shuts down the FET. The time-out period is programmable with an
external capacitor connected to the CT pin. If the fault disappears
before the programmed time-out, normal operation resumes. In
addition, the IntelliTrip
TM
electronic circuit breaker has a fast Hard
Fault shutdown, with a threshold set at 4 times the Over-Current
trip point. When activated, the GATE is immediately turned off and
then slowly turned back on for a single retry.
The IS+, IS-, and IS
OUT
pins combine to provide a load current
monitor feature that presents a scaled version of the load current
at the IS
OUT
pin. Current to voltage conversion is accomplished
by placing a resistor (R9) from IS
OUT
to the negative input (-48V).
Related Literature
ISL6142/52EVAL1 Board Set, Document AN1000
ISL6140/50EVAL1 Board Set, Document AN9967
ISL6140/41EVAL1 Board Set, Document AN1020
ISL6141/51 Hot Plug Controller, Document FN9079
ISL6141/51 Hot Plug Controller, Document FN9039
ISL6116 Hot Plug Controller, Document FN4778
NOTE: See www.intersil.com/hotplug for more information.
Pinout
ISL6142 OR ISL6152 (14 LEAD SOIC)
Typical Application
Features
Operates from -20V to -80V (-100V Absolute Max Rating)
Programmable Inrush Current
Programmable Time-Out
Programmable Current Limit
Programmable Over-Voltage Protection
Programmable Under-Voltage Protection
- 135 mV of hysteresis ~4.7V of hysteresis at the power supply
V
DD
Under-Voltage Lock-Out (UVLO) ~ 16.5V
IntelliTrip
TM
Electronic Circuit Breaker distinguishes between
severe and moderate faults
- Fast shutdown for short circuit faults with a single retry (fault
current > 4X current limit value).
FAULT pin reports the occurrence of an Over-Current Time-Out
Disable input controls GATE shutdown and resets Over-Current
fault latch
Load Current Monitor Function
- IS
OUT
provides a scaled version of the load current
- A resistor from IS
OUT
to -V
IN
provides current to voltage
conversion
Power Good Control Output
- Output latched “good” when DRAIN and GATE voltage
thresholds are met.
- (PWRGD active low: ISL6142 (L version)
- PWRGD active high: ISL6152 (H version)
Pb-free available
Applications
VoIP (Voice over Internet Protocol) Servers
Telecom systems at -48V
Negative Power Supply Control
+24V Wireless Base Station Power
FAULT
OV
10
13
12
4
3
2
CT
PWRGD/PWRGD
1
V
DD
14
GATE
9
IS+
8
SENSE
UV
5
IS-
6
V
EE
7
11 DRAIN
ISL6142/52
Top View
DIS
IS
OUT
ISL6142/ISL6152
V
DD
UV
OV
CT
V
EE
SENSEGATE
DRAIN
PWRGD
PWRGD
R4
R5
R6
R1
R2
R3
C2
C1
Q1
C2 = 3.3nF (100V)
C3 = 1500pF (25V)
Q1 = IRF530
CL = 100uF (100V)
RL = Equivalent load
CL
GND
GND
-48V IN
-48V OUT
RL
LOAD
IS-
IS+
R8
R7
R9
C3
FAULT
DIS
IS
OUT
Logic
Supply
R10
R6 = 10K
(1%)
R7 = R8 = 400
(1%)
R9 = 4.99K
(1%)
R10 =
5.1K
(10%)
C1 = 150nF (25V)
R1 = 0.02
(1%)
R2 = 10
(5%)
R3 = 18K
(5%)
R4 = 549K
(1%)
R5 = 6.49K
(1%)
Data Sheet
July 2004
相关PDF资料 |
PDF描述 |
|---|---|
| ISL6142IB | XTAL MTL T/H HC49/U |
| ISL6152IB | Negative Voltage Hot Plug Controller |
| ISL6160IB-T | InfiniBand +12V Bulk and +5V Auxiliary Power Controller |
| ISL6160 | Octal D-Type Transparent Latches With 3-State Outputs 20-SOIC -40 to 85 |
| ISL6160CB | Octal D-Type Transparent Latches With 3-State Outputs 20-SOIC -40 to 85 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL6152IB | 功能描述:IC CTRLR HOT PLUG NEG 14-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| ISL6152IB-T | 功能描述:IC CTRLR HOT PLUG NEG 14-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| ISL6152IBZA | 功能描述:IC CTRLR HOT PLUG NEG 14-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| ISL6152IBZA-T | 功能描述:IC CTRLR HOT PLUG NEG 14-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| ISL6160 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:InfiniBand +12V Bulk and +5V Auxiliary Power Controller |
发布紧急采购，3分钟左右您将得到回复。