- 您现在的位置：买卖IC网 > PDF目录10688 > ISL83387EIVZ (Intersil)IC TXRX RS232 ESD 24TSSOP PDF资料下载
参数资料
| 型号： | ISL83387EIVZ |
| 厂商： | Intersil |
| 文件页数： | 2/13页 |
| 文件大小： | 0K |
| 描述： | IC TXRX RS232 ESD 24TSSOP |
| 标准包装： | 62 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 3/3 |
| 规程： | RS232 |
| 电源电压： | 3 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 1242 (CN2011-ZH PDF) |
10
FN6040.1
July 8, 2005
High Data Rates
The ISL83387E maintains the RS-232 ±5V minimum
transmitter output voltages even at high data rates. Figure 9
details a transmitter loopback test circuit, and Figure 10
illustrates the loopback test result at 120kbps. For this test,
all transmitters were simultaneously driving RS-232 loads in
parallel with 1000pF, at 120kbps. Figure 11 shows the
loopback results for a single transmitter driving 1000pF and
an RS-232 load at 250kbps. The static transmitters were
also loaded with an RS-232 receiver.
Interconnection with 3V and 5V Logic
Standard 3.3V powered RS-232 devices interface well with
3V and 5V powered TTL compatible logic families (e.g., ACT
and HCT), but the logic outputs (e.g., ROUTS) fail to reach
the VIH level of 5V powered CMOS families like HC, AC, and
CD4000. The ISL83387E VL supply pin solves this problem.
By connecting VL to the same supply (1.8V to 5V) powering
the logic device, the ISL83387E logic outputs will swing from
GND to the logic VCC.
±15kV ESD Protection
All pins on the 3V interface devices include ESD protection
structures, but the ISL83387E incorporates advanced
structures which allow the RS-232 pins (transmitter outputs
and receiver inputs) to survive ESD events up to
±15kV. The
RS-232 pins are particularly vulnerable to ESD damage
because they typically connect to an exposed port on the
exterior of the finished product. Simply touching the port
pins, or connecting a cable, can cause an ESD event that
might destroy unprotected ICs. These new ESD structures
protect the device whether or not it is powered up, protect
FIGURE 9. TRANSMITTER LOOPBACK TEST CIRCUIT
FIGURE 8. TRANSMITTER OUTPUTS WHEN EXITING
POWERDOWN
TIME (20
s/DIV.)
T1
2V/DIV
5V/DIV
VCC = +3.3V
C1 - C4 = 0.1
F
T2
FORCEOFF
ISL83387E
VCC
C1
C2
C4
C3
+
1000pF
V+
V-
5K
TIN
ROUT
C1+
C1-
C2+
C2-
RIN
TOUT
+
VCC
0.1
F
VCC
FORCEOFF
FORCEON
VL
FIGURE 10. LOOPBACK TEST AT 120kbps
FIGURE 11. LOOPBACK TEST AT 250kbps
T1IN
T1OUT
R1OUT
5
s/DIV.
VCC = +3.3V
5V/DIV.
C1 - C4 = 0.1
F
T1IN
T1OUT
R1OUT
2
s/DIV.
5V/DIV.
VCC = +3.3V
C1 - C4 = 0.1
F
ISL83387E
相关PDF资料 |
PDF描述 |
|---|---|
| ICL3223ECAZ | IC 2DRVR/2RCVR RS232 3V 20-SSOP |
| ADCMP606BKSZ-REEL7 | IC COMP TTL/CMOS 1CHAN SC70-6 |
| LTC1540IMS8 | IC COMP 300NA 2% VOLT REF 8-MSOP |
| LT1017CSW#TRPBF | IC COMPARATOR MCRPWR DUAL 16SOIC |
| LT1017CSW#TR | IC COMPARATOR DUAL MCRPWR 16SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL83387EIVZ-T | 功能描述:IC 3DRVR/3RCVR RS232 3V 24-TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| ISL83483 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:3.3V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers |
| ISL83483_04 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:3.3V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers |
| ISL83483IB | 功能描述:IC TXRX RS-485/422 8-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL83483IB-T | 功能描述:IC TXRX RS485/422 3.3V LP 8-S RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:25 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:4.5 V ~ 5.5 V 安装类型:通孔 封装/外壳:16-DIP（0.300"，7.62mm） 供应商设备封装:16-PDIP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。