
ISL84051, ISL84052, ISL84053
5
FN6047.10
May 16, 2011
Absolute Maximum Ratings
Thermal Information
V+ to V-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 15V
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 15V
V- to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15V to 0.3V
Input Voltages
INH, NO, NC, ADD (Note
5). . . . . . . . . . . . . . . . ((V-) - 0.3) to ((V+) + 0.3V)
Output Voltages
COM (Note
5). . . . . . . . . . . . . . . . . . . . . . . . . . . ((V-) - 0.3) to ((V+) + 0.3V)
Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . ±30mA
Peak Current NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max). . . . . . . . . . . . . . . . . . . . . . . . ±100mA
ESD Rating
Human Body Model (Per MIL-STD-883, Method 3015.7) . . . . . . . . >2kV
Thermal Resistance (Typical, Notes
6, 7)θJA (°C/W) θJC (°C/W)
16 Ld SOIC Package . . . . . . . . . . . . . . . . . .
75
39
16 Ld QSOP Package. . . . . . . . . . . . . . . . . .
95
56
16 Ld TSSOP Package . . . . . . . . . . . . . . . . .
110
33
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C
Maximum Storage Temperature Range. . . . . . . . . . . . . . . . . -65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
5. Signals on NC, NO, COM, ADD, or INH exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current ratings.
6.
θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
7. For
θJC, the “case temp” location is taken at the package top center.
Electrical Specifications 5V Supply Test Conditions: VSUPPLY = ±4.5V to ±5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note
8), Unless Otherwise Specified. Boldface limits apply over the operating temperature range, -40°C to +85°C.
PARAMETER
TEST CONDITIONS
TEMP
(°C)
MIN
TYP
MAX
UNITS
ANALOG SWITCH CHARACTERISTICS
Analog Signal Range, VANALOG
Full
V-
-
V+
V
ON-Resistance, rON
VS = ±5V, ICOM = 1mA, VNO or VNC = ±3V
+25
-
60
100
Full
-
125
rON Matching Between Channels,
ΔrON
VS = ±5V, ICOM = 1mA, VNO or VNC = ±3V (Note 11) +25
-
6
Full
-
12
rON Flatness, rFLAT(ON)
VS = ±5V, ICOM = 1mA, VNO or VNC = ±3V, 0V
+25
-
10
Full
-
15
NO or NC OFF Leakage Current,
INO(OFF) or INC(OFF)
VS = ±5.5V, VCOM = ±4.5V, VNO or VNC = ±4.5V
+25
-
0.002
-
nA
Full
-5
-
5
nA
COM OFF Leakage Current, ICOM(OFF),
(ISL84051)
VS = ±5.5V, VCOM = ±4.5V, VNO or VNC = ±4.5V
+25
-
0.002
-
nA
Full
-5
-
5
nA
COM OFF Leakage Current, ICOM(OFF),
(ISL84052, ISL84053)
VS = ±5.5V, VCOM = ±4.5V, VNO or VNC = ±4.5V
+25
-
0.002
-
nA
Full
-2.5
-
2.5
nA
COM ON Leakage Current, ICOM(ON),
(ISL84051)
VS = ±5.5V, VCOM = VNO or VNC = ±4.5V
+25
-
0.002
-
nA
Full
-5
-
5
nA
COM ON Leakage Current, ICOM(ON),
(ISL84052, ISL84053)
VS = ±5.5V, VCOM = VNO or VNC = ±4.5V (Note 12) +25
-
0.002
-
nA
Full
-2.5
-
2.5
nA
DIGITAL INPUT CHARACTERISTICS
Input Voltage High, VINH, VADDH
Full
2.4
--
V
Input Voltage Low, VINL, VADDL
Full
-
0.8
V
Input Current, IINH, IINL, IADDH, IADDL VS = ±5.5V, VINH, VADD = 0V or V+
Full
-1
0.03
1
A