- 您现在的位置：买卖IC网 > PDF目录20179 > ISL9016IRUKWZ-T (Intersil)IC REG LDO 2.85V/1.2V 6-UTDFN PDF资料下载
参数资料
| 型号： | ISL9016IRUKWZ-T |
| 厂商： | Intersil |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 2.85V/1.2V 6-UTDFN |
| 标准包装： | 3,000 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 2.85V，1.2V |
| 输入电压： | 1.8 V ~ 6.5 V |
| 电压 - 压降（标准）： | 0.12V @ 150mA，- |
| 稳压器数量： | 2 |
| 电流 - 输出： | 150mA（最小） |
| 电流 - 限制（最小）： | 175mA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-UFDFN 裸露焊盘 |
| 供应商设备封装： | 6-UTDFN（1.6x1.6） |
| 包装： | 带卷 (TR) |
ISL9016
Input and Output Capacitors
The ISL9016 provides a linear regulator that has low quiescent
current, fast transient response, and overall stability across the
recommended operating conditions. A ceramic capacitor (X5R or
X7R) with a capacitance of 1μF to 4.7μF with an ESR up to 200m ?
is suitable for the ISL9016 to maintain its output stability. The
ground connection of the output capacitor should be connected
directly to the GND pin of the device, and also placed close to the
device. Similarly for the input capacitor, usually a 1μF ceramic
Board Layout Recommendations
A good PCB layout will be an important step to achieve good
performance. It is recommended to design the board with
separate ground planes for input and output, and connect both
ground planes at the GND pin of the device. Consideration should
be taken when placing the components and route the trace to
minimize the ground impedance, as well as keep the parasitic
inductance low. Usually the input/output capacitors should be
placed close to the device with good ground connection.
capacitor (X5R or X7R) is suitable for most cases, but if large, fast
rising-time load transient condition is expected, a higher value
input capacitor may be necessary to achieve better performance.
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest revision.
DATE
April 26, 2011
January 22, 2009
REVISION
FN6832.1
FN6832.0
CHANGE
Added ISL9016IRUCCZ-T to Ordering Information table.
Initial release.
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products
address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks.
Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a
complete list of Intersil product families.
*For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page
on intersil.com: ISL9016
To report errors or suggestions for this datasheet, please go to: www.intersil.com/askourstaff
FITs are available from our website at: http://rel.intersil.com/reports/sear
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
10
FN6832.1
May 16, 2011
相关PDF资料 |
PDF描述 |
|---|---|
| GBA15DTMN | CONN EDGECARD 30POS R/A .125 SLD |
| VE-222-CX-F1 | CONVERTER MOD DC/DC 15V 75W |
| PSAA30R-150-R-CN3 | ADAPTER WALL R-SERIES 30W 15V |
| VE-24R-EV-F3 | CONVERTER MOD DC/DC 7.5V 150W |
| PSAA30R-150-R-CN2 | ADAPTER WALL R-SERIES 30W 15V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL9016IRUMBZ-T | 功能描述:IC REG LDO 3V/1.5V .15A 6-UTDFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.25 V ~ 10 V 输入电压:2.9 V ~ 12 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:700mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:Digi-Reel® 其它名称:NCV8535MNADJR2GOSDKR |
| ISL9016IRUMCZ-T | 功能描述:IC REG LDO 3V/1.8V .15A 6-UTDFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.25 V ~ 10 V 输入电压:2.9 V ~ 12 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:700mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:Digi-Reel® 其它名称:NCV8535MNADJR2GOSDKR |
| ISL9016IRUMKZ-T | 功能描述:IC REG LDO 3V/2.85V .15A 6-UTDFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.25 V ~ 10 V 输入电压:2.9 V ~ 12 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:700mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:Digi-Reel® 其它名称:NCV8535MNADJR2GOSDKR |
| ISL9016IRUMWZ-T | 功能描述:IC REG LDO 3V/1.2V .15A 6-UTDFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.25 V ~ 10 V 输入电压:2.9 V ~ 12 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:700mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:Digi-Reel® 其它名称:NCV8535MNADJR2GOSDKR |
| ISL9016IRUNCZ-T | 功能描述:IC REG LDO 3.3/1.8V .15A 6-UTDFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:250 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降（标准）:0.08V @ 150mA 稳压器数量:1 电流 - 输出:150mA（最小值） 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:4-WFBGA 供应商设备封装:4-TuSMD 包装:带卷 (TR) 产品目录页面:1295 (CN2011-ZH PDF) 配用:LP5900TL-3.0EV-ND - BOARD EVALUATION LP5900TL-3.0 其它名称:LP5900TL-3.0LP5900TL-3.0TR |
发布紧急采购，3分钟左右您将得到回复。