参数资料
型号: IT83C154CXXX-36D
厂商: ATMEL CORP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 36 MHz, MICROCONTROLLER, PQFP44
封装: 1 MM HEIGHT, TQFP-44
文件页数: 7/132页
文件大小: 10886K
代理商: IT83C154CXXX-36D
15
7593L–AVR–09/12
AT90USB64/128
Figure 5-3.
The X-, Y-, and Z-registers.
In the different addressing modes these address registers have functions as fixed displacement,
automatic increment, and automatic decrement (see the instruction set reference for details).
5.6
Stack pointer
The Stack is mainly used for storing temporary data, for storing local variables and for storing
return addresses after interrupts and subroutine calls. The Stack Pointer Register always points
to the top of the Stack. Note that the Stack is implemented as growing from higher memory loca-
tions to lower memory locations. This implies that a Stack PUSH command decreases the Stack
Pointer.
The Stack Pointer points to the data SRAM Stack area where the Subroutine and Interrupt
Stacks are located. This Stack space in the data SRAM must be defined by the program before
any subroutine calls are executed or interrupts are enabled. The Stack Pointer must be set to
point above 0x0100. The initial value of the stack pointer is the last address of the internal
SRAM. The Stack Pointer is decremented by one when data is pushed onto the Stack with the
PUSH instruction, and it is decremented by three when the return address is pushed onto the
Stack with subroutine call or interrupt. The Stack Pointer is incremented by one when data is
popped from the Stack with the POP instruction, and it is incremented by three when data is
popped from the Stack with return from subroutine RET or return from interrupt RETI.
The AVR Stack Pointer is implemented as two 8-bit registers in the I/O space. The number of
bits actually used is implementation dependent. Note that the data space in some implementa-
tions of the AVR architecture is so small that only SPL is needed. In this case, the SPH Register
will not be present.
15
XH
XL
0
X-register
70
7
0
R27 (0x1B)
R26 (0x1A)
15
YH
YL
0
Y-register
70
7
0
R29 (0x1D)
R28 (0x1C)
15
ZH
ZL
0
Z-register
7
070
R31 (0x1F)
R30 (0x1E)
Bit
1514
1312
1110
9
8
SP15
SP14
SP13
SP12
SP11
SP10
SP9
SP8
SPH
SP7
SP6
SP5
SP4
SP3
SP2
SP1
SP0
SPL
76
54
32
10
Read/write
R/W
Initial value
00
10
00
11
相关PDF资料
PDF描述
IV80C51-12D 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44
IS80C31-30D 8-BIT, 30 MHz, MICROCONTROLLER, PQCC44
IR80C52TXXX-30D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, CQCC44
IF183C154CXXX-L16D 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP44
IC80C32E-12SHXXX 8-BIT, 12 MHz, MICROCONTROLLER, CDIP40
相关代理商/技术参数
参数描述
IT83C154DC-12 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IT83C154DC-16 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IT83C154DC-20 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IT83C154DC-25 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IT83C154DC-30 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller