- 您现在的位置：买卖IC网 > PDF目录5456 > IUGX66-3680-2 (Sensata Technologies/Airpax)MAGNETIC CIRCUIT BREAKER PDF资料下载
参数资料
| 型号： | IUGX66-3680-2 |
| 厂商： | Sensata Technologies/Airpax |
| 文件页数： | 18/24页 |
| 文件大小： | 0K |
| 描述： | MAGNETIC CIRCUIT BREAKER |
| 标准包装： | 1 |
| 系列： | IUG |
| 断路器类型： | 磁性（液力延迟） |
| 电压： | 80VDC，250VAC |
| 电流 - 跳闸(It)： | 2A |
| 极数： | 2 |
| 触动器类型： | 拨动式开关 |
| 安装类型： | 面板安装 |
| 其它名称： | Q4753622 T0990433 |
SPECIFICATIONS
Trip Free
Will trip open on overload, even when forcibly held in the ON position. This
prevents the operator from damaging the circuit by holding on the protector.
Vibration
Circuit protector shall not trip when vibrated per MIL-STD-202, Method 204, Test
Condition A with 100% rated current applied to delayed units and 80% rated
current to instantaneous units.
Trip Indication
The operating handle moves positively to the OFF position on overload.
Ambient Operation
IAG/IUG/IEG/CEG/LEG protectors operate in temperatures between –40° C to
+85° C.
Insulation Resistance
VDE Approval
IEG is VDE approved under VDE 0642 (EN60934). The IEG has 8mm creepage and
clearance between the main circuit and the following areas:
A. Operator accessible area around the handle.
B. The mounting inserts or brackets.
C. The auxiliary switch circuit.
D. Between poles.
Not less than 100 megohms at 500 volts DC.
Care must be taken to maintain spacings at the terminals when wired. The VDE
Dielectric Strength
IAG/IUG/IEG/CEG/LEG protectors withstand 3750Vac, 60Hz for 60 seconds
between all electrically isolated terminals, except auxiliary switch terminals
shall withstand 600Vac, 60Hz for REG and REC types. Four terminal dual coil and
relay construction (not offered in the IEG) will withstand 1500Vac.
approval for standard terminals is not for use with bare wire. A crimp type lug is
required. In addition, all VDE approved units will be in compliance with specific
CE Directives. These units will be marked as CE Compliant.
UL1500 (Marine Ignition Protected)
IDG/IDGH is approved for Marine Ignition Protection
Endurance
Operating as a switch, the operating life exceeds 10,000 operations at a rate of
6 per minute when tested as follows: 6000 OPS @ rated current plus 4000 OPS
@ at no load.
Electrical Characteristics
.050-50 amperes; 80Vdc Max., 240Vac Max., 50/60Hz and .050-30 amperes:
250Vac Max., 400Hz. Units above 30 amps are not suitable for across-the-line
motor starting.
Auxiliary Switch
When supplied shall be SPDT configuration. Non VDE approved switches have
a maximum UL rating of 10.0 amperes, 250 volts, 60Hz; 3.0 amperes, 50 volts DC,
1 amperes, 80 volts DC (REC) type or 0.1 amperes, 125 volts, 60Hz. (REG type).
VDE approved switches have a maximum UL rating of 10.0 amperes, 250 volts,
60Hz, 1 amperes, 80 volts DC (REG type); or 0.1 amperes, 125 volts, 60Hz (REG
type); or 0.1 amperes, 125 volts, 60Hz (REG type).
UL489A Listed
The CEG is dimensionally the same as the popular IEG, but provides UL listing to
UL489A. Available in one to three poles, in series, series with auxiliary switch,
shunt, dual coil and voltage trip configurations. As a circuit breaker, the CEG
provides communication equipment manufacturers with a UL listed circuit
breaker in a very compact package that meets the stringent environmental
requirements of today’s marketplace. This makes the CEG ideal for switching,
transmission and wireless applications.
UL489 Listed
The LEG is dimensionally the same as the popular IEG, but provides UL listing to
UL489. Available with one or two poles, in series, series with auxiliary switch,
shunt and three-terminal dual coil configurations. As a circuit breaker, the LEG
provides equipment manufacturers with a UL listed magnetic hydaulic circuit
breaker in the most compact package available on the market.
APPROXIMATE WEIGHT PER POLE (1 TO 6 POLES AVAILABLE)
Moisture Resistance
Meets all the requirements of MIL-PRF-55629 when tested in accordance with
Method 106 of MIL-STD-202.
Salt Spray (Corrosion)
Meets the requirements of MIL-PRF-55629 when tested in accordance with
Method 101 of MIL-STD-202.
Shock
Circuit protectors shall not trip when tested per MIL-STD-202, Method 213, Test
Condition I with 100% rated current applied to delayed units, except 90% current in
plane 4 (i.e., handle down). Instantaneous units shall have 80% rated current
applied in all planes.
Ounces
2.2
RECOMMENDED TORQUE SPECIFICATIONS
Component
6-32 Mounting Inserts
M3 Mounting Screws
8-32 Screw Terminals
M4 Terminal Screws
10-32 Screw Terminals
M5 Screw Terminals
Grams
62.4
Torque (in-lbs)
6 to 8
4 to 5
10 to 12
10 to 12
14 to 15
14 to 15
Construction
Series, shunt, relay and series with auxiliary switch available in various delays
and combinations.
1/2 - 32 Mounting Bushing 30 to 35
Where applicable, mechanical support must be provide to the terminals when
applying torque
115
IAG Series - Specifications
http://airpax.sensata.com
相关PDF资料 |
PDF描述 |
|---|---|
| AD8691WAUJZ-R7 | IC OPAMP GP R-R CMOS LN TSOT23-5 |
| SMCJ64A-13 | TVS UNI-DIR 64V 1500W SMC |
| 70233-126 | PF MALE SIGNAL LCP 24MM |
| SMCJ48CA-13 | TVS BI-DIR 48V 1500W SMC |
| 51741-10002408CC | V/T REC POWERBLADE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IUGX666-1-42-.500-22 | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 0.5A 277VAC |
| IUGX666-1-42-5.00-21 | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 5A 277VAC |
| IUGX666-1-43-2.50-21 | 制造商:Sensata Technologies 功能描述:IUGX666-1-43-2.50-21 /Pole # 3 /Prod Family: 0217 |
| IUGX666-1-49-30.0-B-21 | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 30A 277VAC |
| IUGX666-1-63F-20.0-01 | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 20A 277VAC |
发布紧急采购，3分钟左右您将得到回复。