- 您现在的位置：买卖IC网 > PDF目录224023 > J255-12M/G (TELEDYNE TECHNOLOGIES INC) POWER/SIGNAL RELAY, DPDT, LATCHED, 0.047A (COIL), 12VDC (COIL), 564mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT PDF资料下载
参数资料
| 型号： | J255-12M/G |
| 厂商： | TELEDYNE TECHNOLOGIES INC |
| 元件分类： | 功率/信号继电器 |
| 英文描述： | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.047A (COIL), 12VDC (COIL), 564mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
| 封装： | LEAD FREE |
| 文件页数： | 3/3页 |
| 文件大小： | 1105K |
| 代理商： | J255-12M/G |
2007 TELEDYNE RELAYS
(800) 284-7007 www.teledynerelays.com
J255 Page 3
J255\042007\Q
SERIES J255 and 255
OUTLINE DIMENSIONS
.810 MAX
(20.57)
.825 MAX
(20.95)
2X.100
(2.54)
2X.100
(2.54)
CONTRASTING
GLASS (X1)
.410 MAX
(10.41)
.410 MAX
(10.41)
.425 MAX
(10.8)
.200 TYP
(5.08)
.200
TYP
(5.08)
.187 ±.020
(4.75 ±0.5)
10 LEADS
MEASUREMENTS IN INCHES
(MILLIMETERS)
.030
+.003
–.002
.76
+.075
–.05
NoTES:
. Vibration (sinusoidal): MIL-STD-202, method
204, test condition D (except frequency shall
be 0 to 2,500 Hz). Contact chatter shall not
exceed 0 μs maximum for closed contacts,
and μs maximum closure for open contacts.
Vibration (random): MIL-STD-202, method
24, test condition IG. Contact chatter shall
not exceed 0 μs maximum for closed
contacts, and μs maximum closure for open
contacts (applicable to qualification and group
C testing only).
2. Shock (half-sine pulse): MIL-STD-202,
method 23, test condition C (00 g’s).
Contact chatter shall not exceed 0 μs
maximum for closed contacts, and μs
maximum closure for open contacts.
3. Dimensions are in inches. Metric equivalents
in parentheses for reference only.
4. unless otherwise specified, tolerance is ±.00
(0.25mm).
5. Indicated terminal is marked with a
contrasting bead.
6. unless otherwise specified, relays will be
supplied with either gold-plated or solder-
coated leads. The slash and characters
appearing after the slash are not marked on
the relay.
7. When latching relays are installed in
equipment, the latch and reset coils should
not be pulsed simultaneously.
8. Each relay possesses high-level and low-
level capabilities. However, relays previously
tested or used above 0 mA resistive at
6 Vdc maximum or peak ac open circuits not
recommended for subsequent use in low-level
applications.
9. Relays may be subjected to 260°C ( minute)
peak solder reflow temperature.
0. For hi-rel applications, contact factory at (800)
284-7007.
. The suffix letter L and M to designate the
applicable failure rate level shall be added to
the applicable listed dash number. Failure rate
level (percent per 0,000 cycles): L = 3.0;
M = .0.
2.
Teledyne Part Numbering System for Standard Relays
EXAMPLE:
255
-
12
/
Q
Relay Family
Commercial
Coil Voltage
5 = 5 volts
6 = 6 volts
2 = 2 volts
26 = 26.5 volts
Lead Finish
G = .87 gold-plated wire lead
Q = .87 solder-coated wire lead
blank = .87 gold-plated or solder-coated
wire lead (See Note 6)
J255
-
12
L
/
Q
Relay Family
Military
Qualified
Coil Voltage
5 = 5 volts
6 = 6 volts
2 = 2 volts
26 = 26.5 volts
Lead Finish
G = .87 gold-plated wire lead
Q = .87 solder-coated wire lead
blank = .87 gold-plated or solder-coated
wire lead (See Note 6)
Reliability Level
L = 3% (See Note )
M = % (See Note )
相关PDF资料 |
PDF描述 |
|---|---|
| J255-12M/Q | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.047A (COIL), 12VDC (COIL), 564mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
| J255-26L/G | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.027A (COIL), 26.5VDC (COIL), 716mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
| J255-26L/Q | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.027A (COIL), 26.5VDC (COIL), 716mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
| J255-26M/G | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.027A (COIL), 26.5VDC (COIL), 716mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
| J255-26M/Q | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.027A (COIL), 26.5VDC (COIL), 716mW (COIL), 2A (CONTACT), 28VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| J255-26L/G | 制造商:Teledyne Relays 功能描述:QPL TO-5/.100 GRID - Bulk |
| J255-26L/Q | 制造商:Teledyne Relays 功能描述:J255-26L/Q - Bulk 制造商:Teledyne Relays 功能描述:QPL TO-5/.100 GRID - Bulk |
| J255-26M/G | 制造商:Teledyne Relays 功能描述:QPL TO-5/.100 GRID - Bulk |
| J255-26M/Q | 制造商:Teledyne Relays 功能描述:J255-26M/Q - Bulk 制造商:Teledyne Relays 功能描述:EM RLY DPDT 2A 26.5VDC 1KOHM TH - Bulk |
| J255-48L/Q | 制造商:Teledyne Relays 功能描述:J255-48L/Q - Bulk 制造商:Teledyne Relays 功能描述:QPL TO-5/.100 GRID - Bulk |
发布紧急采购，3分钟左右您将得到回复。