- 您现在的位置：买卖IC网 > PDF目录299235 > JANTX2N4238 TRANSISTOR | BJT | NPN | 60V V(BR)CEO | 1A I(C) | TO-5 PDF资料下载
参数资料
| 型号： | JANTX2N4238 |
| 英文描述： | TRANSISTOR | BJT | NPN | 60V V(BR)CEO | 1A I(C) | TO-5 |
| 中文描述： | 晶体管|晶体管|叩| 60V的五（巴西）总裁| 1A条一（c）|至5 |
| 文件页数： | 20/21页 |
| 文件大小： | 137K |
| 代理商： | JANTX2N4238 |
MIL-PRF-19500/368F
8
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2 Qualification. Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer's list (QML)
before contract award (see 4.2 and 6.3).
3.3 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
* 3.4 Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500, MIL-HDBK-6100 and on figure 1 (similar to TO- 5 and TO-39), figure 2 (JANHCA and JANKCA, (A
versions)), figure 3 (JANHCB and JANKCB (B versions)), and figure 4 (2N3439UA and 2N3440UA surface mount
versions).
3.4.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500, MIL-STD-750, and herein.
Where a choice of lead finish is desired, it shall be specified in the acquisition document (see 6.2).
3.5 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characteristics are as specified in 1.3, 1.4, and table I herein.
3.6 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I herein.
3.7 Marking. Marking shall be in accordance with MIL-PRF-19500. At the option of the manufacturer, marking
may be omitted from the body, but shall be retained on the initial container.
3.8 Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Screening (see 4.3).
c.
Conformance inspection (see 4.4).
4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and table II
herein.
* 4.2.1 Group E qualification. Group E inspection shall be performed for qualification or re-qualification only. In
case qualification was awarded to a prior revision of the associated specification that did not request the
performance of table II tests, the tests specified in table II herein shall be performed by the next inspection lot to this
revision to maintain qualification.
相关PDF资料 |
PDF描述 |
|---|---|
| JANTX2N5237 | TRANSISTOR | BJT | NPN | 120V V(BR)CEO | 5A I(C) | TO-5 |
| JANTX2N5237S | TRANSISTOR | BJT | NPN | 120V V(BR)CEO | 5A I(C) | TO-5VAR |
| JANTX2N5238 | TRANSISTOR | BJT | NPN | 170V V(BR)CEO | 5A I(C) | TO-5 |
| JANTX2N5238S | TRANSISTOR | BJT | NPN | 170V V(BR)CEO | 5A I(C) | TO-5VAR |
| JANTX2N5250 | TRANSISTOR | BJT | NPN | 100V V(BR)CEO | 90A I(C) | STR-1/2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JANTX2N4239 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT NPN 80V 1A 3-Pin TO-39 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 80V 1A 3PIN TO-39 - Bulk |
| JANTX2N4261 | 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR - Bulk |
| JANTX2N4261UB | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 15V 0.03A 3-Pin UB 制造商:Semicoa Semiconductors 功能描述:Trans GP BJT PNP 15V 0.03A 3-Pin CSOT-23 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR TO-46 LAW - Waffle Pack |
| JANTX2N4399 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 60V 30A 3-Pin(2+Tab) TO-3 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 60V 30A 3PIN TO-3 - Bulk |
| JANTX2N4405 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 3-Pin TO-39 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 3PIN TO-39 - Bulk 制造商:Microsemi 功能描述:Trans GP BJT PNP 3-Pin TO-39 |
发布紧急采购，3分钟左右您将得到回复。