参数资料
型号: JANTX2N6784U
英文描述: 200V Single N-Channel Hi-Rel MOSFET in a 18-pin LCC package
中文描述: 200伏单N沟道高可靠性的18 MOSFET的引脚LCC封装
文件页数: 20/21页
文件大小: 137K
代理商: JANTX2N6784U
MIL-PRF-19500/368F
8
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2 Qualification. Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer's list (QML)
before contract award (see 4.2 and 6.3).
3.3 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
* 3.4 Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500, MIL-HDBK-6100 and on figure 1 (similar to TO- 5 and TO-39), figure 2 (JANHCA and JANKCA, (A
versions)), figure 3 (JANHCB and JANKCB (B versions)), and figure 4 (2N3439UA and 2N3440UA surface mount
versions).
3.4.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500, MIL-STD-750, and herein.
Where a choice of lead finish is desired, it shall be specified in the acquisition document (see 6.2).
3.5 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characteristics are as specified in 1.3, 1.4, and table I herein.
3.6 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I herein.
3.7 Marking. Marking shall be in accordance with MIL-PRF-19500. At the option of the manufacturer, marking
may be omitted from the body, but shall be retained on the initial container.
3.8 Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Screening (see 4.3).
c.
Conformance inspection (see 4.4).
4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and table II
herein.
* 4.2.1 Group E qualification. Group E inspection shall be performed for qualification or re-qualification only. In
case qualification was awarded to a prior revision of the associated specification that did not request the
performance of table II tests, the tests specified in table II herein shall be performed by the next inspection lot to this
revision to maintain qualification.
相关PDF资料
PDF描述
JANTX2N6790U 200V Single N-Channel Hi-Rel MOSFET in a 18-pin LCC package
JANTX2N6792U 400V Single N-Channel Hi-Rel MOSFET in a 18-pin LCC package
JANTX2N6796U 100V Single N-Channel Hi-Rel MOSFET in a 18-pin LCC package
JANTX2N6798U 200V Single N-Channel Hi-Rel MOSFET in a 18-pin LCC package
JANTX2N6800U 400V Single N-Channel Hi-Rel MOSFET in a 18-pin LCC package
相关代理商/技术参数
参数描述
JANTX2N6786 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 400V 1.25A 3PIN TO-39 - Bulk 制造商:International Rectifier 功能描述:400V SINGLE N-CHANNEL HI-REL MOSFET
JANTX2N6786U 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 400V 1.25A 18LLCC - Bulk
JANTX2N6788 制造商:International Rectifier 功能描述:Trans MOSFET N-CH 100V 6A 3-Pin TO-39 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 100V 6A 3PIN TO-39 - Bulk 制造商:Microsemi Corporation 功能描述:2N6788JANTX - Bulk 制造商:International Rectifier 功能描述:Single N-Channel 100 V 20 W 18 nC Power Mosfet Through Hole - TO-39
JANTX2N6788U 制造商:International Rectifier 功能描述:Trans MOSFET N-CH 100V 4.5A 18-Pin LLCC 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 100V 4.5A 18PIN LCC - Bulk 制造商:Microsemi Corporation 功能描述:2N6788UJANTX - Bulk
JANTX2N6790 制造商:International Rectifier 功能描述:Trans MOSFET N-CH 200V 3.5A 3-Pin TO-39 制造商:International Rectifier 功能描述:TRANS MOSFET N-CH 200V 3.5A 3PIN TO-39 - Bulk