参数资料
型号: JBX0MPN
厂商: Souriau Connection Technology
文件页数: 17/50页
文件大小: 0K
描述: CONN BOOT PROTECTIVE SIZE 0 BLK
产品培训模块: Push Pull Connectors
特色产品: JBX Series Push Pull Connectors
标准包装: 1
系列: JBX
附件类型: 套管
适用于相关产品: JBX and JKX Plugs
外壳尺寸 - 插件: 0
材质: Elastollan
颜色:
产品目录页面: 407 (CN2011-ZH PDF)
配用: SOU1816-ND - CONN PLUG 5POS RA PIN SOLDER
SOU1780-ND - PLUG 5POS MALE CRIMP BOOT BN
SOU1549-ND - CONN PLUG 7POS STRAIGHT SOLDER
SOU1548-ND - CONN PLUG 6POS STRAIGHT SOLDER
SOU1547-ND - CONN PLUG 5POS STRAIGHT SOLDER
SOU1546-ND - CONN PLUG 4POS STRAIGHT SOLDER
SOU1545-ND - CONN PLUG 3POS STRAIGHT CRIMP
SOU1544-ND - CONN PLUG 3POS STRAIGHT SOLDER
SOU1543-ND - CONN PLUG 2POS STRAIGHT CRIMP
SOU1542-ND - CONN PLUG 2POS STRAIGHT SOLDER
其它名称: SOU1618
JBX Series
Wiring and assembly
instructions :
90° ELBOW PLUG
? Connector preparation
1 - Select the proper collet (see page 19).
2 - Slide the protective boot ? , the backnut ? , the collet ? and the elbow
outlet ? over the cable. Strip end of cable (see pg. 17).
3 - If a shielded cable is used, fold the braid back over the collet ? .
4 - Align the keys in the elbow outlet ? with the key slot in the collet.
Braid
5 - Apply thread lock to the backnut ? .
6 - Install the back nut ? and tighten until it bottoms.
? Contacts wiring : crimp contacts
1 - Select the proper crimping tool and locator. (see page 48)
2 - Adjust the crimping tool based on wire size “AWG”. (See wire size and
crimp tool settings on the back of the locator)
3 - Crimp the contacts ? then insert the contact into the insulator until the
clip is fully seated and cannot be removed.
? Contacts wiring : solder contacts
Fixed solder contacts 0.5 mm and 0.7 mm
1 - Insert wire into solder cup and solder.
Removable solder contacts from 0.9 mm to 2 mm
1 - Insert wire into solder cup and solder.
2 - Insert contact into the insulator until the clip is fully seated and cannot be removed.
? Connector assembly : 90 degree plug
1 - Position the ring ? over the insulator.
2 - Align the key on the insulator ? with the key way
on the spacer ? and insert the insulator into the
Milled flats A
18
spacer.
3 - Insert the insulator sub-assembly into the connector
housing ? insuring the flats on the elbow outlet ?
are facing the retaining nut ? .
4 - Apply thread lock to retaining nut ? .
5 - Tighten the retaining nut ? to the recommended
torque on page 19.
相关PDF资料
PDF描述
JBXEP2G16FQSDS CONN RCPT 16POS REAR MNT RA SKT
JC26C2-DSM16E CONN COMPACT FLASH RIGHT EJECTOR
JC26C2-DSR16E CONN COMPACT FLASH RIGHT EJECTOR
JC26C2-FSRE CONN COMPACT FLASH RIGHT EJECTOR
JC26E-BB-E1050E CONN HEADER COMPACT FLASH R/A
相关代理商/技术参数
参数描述
JBX0MPR 功能描述:环形推拉式连接器 JBX Boot Red Size 0 RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A
JBX0OUTLP07 功能描述:环形推拉式连接器 Pin Locator Size 0 22-26 AWG, 0.7mm RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A
JBX0OUTLP09 功能描述:环形推拉式连接器 Pin Locator Size 0 20-24 AWG, 0.9mm RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A
JBX0RIN 功能描述:环形推拉式连接器 Insulating Washer JBX Size 0, Black RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A
JBX1BI08FS 功能描述:环形推拉式连接器 8P Socket Insert Shell Size 1 RoHS:否 制造商:Hirose Connector 产品类型:Connectors 系列:HR10 触点类型:Socket (Female) 外壳类型:Receptacle 触点数量:4 外壳大小:7 安装风格:Panel 端接类型:Solder 电流额定值:2 A