- 您现在的位置：买卖IC网 > PDF目录21620 > JC2AF-DC12V-F (Panasonic Electric Works)RELAY GEN PURPOSE DPST 10A 12V PDF资料下载
参数资料
| 型号： | JC2AF-DC12V-F |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | RELAY GEN PURPOSE DPST 10A 12V |
| 其它有关文件： | General Appl Guidelines |
| 产品变化通告： | JC Relays Discontinuation Mar/2012 |
| 产品目录绘图： | JC Series PCB Mount JC2AF-DC Series Footprint JC2AF-DC Series Circuit |
| 标准包装： | 50 |
| 系列： | JC |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 83.3mA |
| 线圈电压： | 12VDC |
| 触点形式： | DPST（2 A 型） |
| 触点额定值（电流）： | 10A |
| 切换电压： | 250VAC - 最小值 |
| 关闭电压（最大）： | 9.6 VDC |
| 关闭电压（最小）： | 1.2 VDC |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 散装 |
| 触点材料： | 银锡氧化物（AgSnO） |
| 操作时间： | 30ms |
| 释放时间： | 10ms |
| 线圈功率： | 1 W |
| 线圈电阻： | 144 欧姆 |
| 工作温度： | -50°C ~ 60°C |
| 产品目录页面： | 2607 (CN2011-ZH PDF) |
| 其它名称： | 255-2385 |
JC
RATING
1. Coil data
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(at 20 ° C 68 ° F )
Drop-out voltage
(at 20 ° C 68 ° F )
Nominal operating
current
[ ± 10%] (at 20 ° C 68 ° F )
Coil resistance
[ ± 10%] (at 20 ° C 68 ° F )
Nominal operating
power
Max. applied voltage
(at 60 ° C 140 ° F )
6V DC
150 mA
40 ?
0.9W
1 Form A
12V DC
75 mA
160 ?
0.9W
2 Form A
24V DC
6V DC
12V DC
80%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
37.5mA
166.6mA
83.3mA
640 ?
36 ?
144 ?
0.9W
1.0W
1.0W
110%V of
nominal voltage
24V DC
41.6mA
576 ?
1.0W
2. Speci?cations
Characteristics
Contact
Rating
Item
Contact material
Arrangement
Contact resistance (Initial)
Contact force
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (reference value)* 1
Insulation resistance (Initial)
Between open contacts
Speci?cations
AgSnO 2 type
1 Form A 2 Form A
Max. 100 m ? (By voltage drop 6 V DC 1A)
Min. 30 g
15A 250V AC 10A 250V AC
3,750VA 2,500VA
250V AC
15A 10A
900mW 1,000mW
100mA, 5V DC
Min. 100M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
2,000 Vrms for 1 min. (Detection current: 10 mA)
Breakdown voltage
(Initial)
Between contacts sets
—
2,000 Vrms for 1 min.
(Detection current: 10 mA)
Electrical
characteristics
Between contact and coil
Temperature rise (coil)
Surge breakdown voltage* 2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20 ° C 68 ° F )
Release time (at nominal voltage) (at 20 ° C 68 ° F )
4,000 Vrms for 1 min. (Detection current: 10 mA)
Max. 55 ° C 131 ° F (By resistive method, nominal coil voltage applied to the coil, at 60 ° C 140 ° F )
10,000 V
Max. 30 ms (excluding contact bounce time.)
Max. 10 ms (excluding contact bounce time) (Without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
196 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
980 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 2.0 mm
Expected life
Conditions
Mechanical (at 180 times/min.)
Electrical (at 20 times/min.)
Conditions for operation, transport and storage* 3
Min. 5 × 10 6
Min. 10 5 (10A 250V AC at rated load), Min. 10 5 (5A 250V AC at rated load)
Ambient temperature: –50 ° C to +60 ° C –58 ° F to +140 ° F ,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. operating speed
20 times/min. (at nominal switching capacity)
Approx. 31 g 1.09 oz
* Speci?cations will vary with foreign standards certi?cation ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ± 1.2 × 50 μ s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
JC1a type
1. Maximum value for switching capacity
2. Operate / release time
15
10
1
0.1
DC resistive load
DC inductive load
(L/R = 7 ms)
AC resistive load
AC
inductive
load
(cos ? = 0.4)
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
Operate time
Max.
Min.
1
10
100 400
4
3
2
1
0
Release time
80 100
Max.
Min.
120
Contact voltage, V
Coil applied voltage, %V
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
ASCTB79E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| G5CA-1A-H DC12 | RELAY GEN PURPOSE SPST 10A 12V |
| HJ2-L-DC48V | RELAY GEN PURPOSE DPDT 7A 48V |
| HJ2-L-AC48V | RELAY GEN PURPOSE DPDT 7A 48V |
| HJ2-L-AC24V | RELAY GEN PURPOSE DPDT 7A 24V |
| HJ2-L-AC12V | RELAY GEN PURPOSE DPDT 7A 12V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JC2AF-DC12V-TV-F | 功能描述:通用继电器 2 Form A 10A 250VAC 12VDC RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| JC2AF-DC24V | 功能描述:RELAY GEN PURPOSE DPST 10A 24V RoHS:是 类别:继电器 >> 功率，高于 2 安 系列:JC 产品目录绘图:Slim CT Series Footprint Slim CT Series Circuit Slim CT Series 标准包装:30 系列:ACT 继电器类型:自动 线圈类型:无锁存 线圈电流:66.7mA 线圈电压:12VDC 触点形式:SPDT（1 C 型） 触点额定值（电流）:20A 切换电压:14VDC -标称 关闭电压（最大）:7.2 VDC 关闭电压（最小）:1 VDC 特点:- 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:银合金，无镉 操作时间:10ms 释放时间:10ms 线圈功率:800 mW 线圈电阻:180 欧姆 工作温度:-40°C ~ 85°C 产品目录页面:2609 (CN2011-ZH PDF) 其它名称:255-2591ACT112-ND |
| JC2AF-DC24V-F | 功能描述:通用继电器 20A 24VDC SPST PCB RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| JC2AF-DC24V-TV-F | 功能描述:通用继电器 2 Form A 10A 250VAC 24VDC RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| JC2AF-DC48V | 功能描述:RELAY GEN PURPOSE DPST 10A 48V RoHS:是 类别:继电器 >> 功率，高于 2 安 系列:JC 产品目录绘图:Slim CT Series Footprint Slim CT Series Circuit Slim CT Series 标准包装:30 系列:ACT 继电器类型:自动 线圈类型:无锁存 线圈电流:66.7mA 线圈电压:12VDC 触点形式:SPDT（1 C 型） 触点额定值（电流）:20A 切换电压:14VDC -标称 关闭电压（最大）:7.2 VDC 关闭电压（最小）:1 VDC 特点:- 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:银合金，无镉 操作时间:10ms 释放时间:10ms 线圈功率:800 mW 线圈电阻:180 欧姆 工作温度:-40°C ~ 85°C 产品目录页面:2609 (CN2011-ZH PDF) 其它名称:255-2591ACT112-ND |
发布紧急采购，3分钟左右您将得到回复。