参数资料
型号: JTN1AG-PA-F-DC5V
厂商: Panasonic Electric Works
文件页数: 2/4页
文件大小: 0K
描述: RELAY GEN PURPOSE SPST 30A 5V
其它有关文件: General Appl Guidelines
Standards Chart
标准包装: 50
系列: JT-N
继电器类型: 通用
线圈类型: 无锁存
线圈电流: 160mA
线圈电压: 5VDC
触点形式: SPST-NO(1 A 型)
触点额定值(电流): 30A
切换电压: 277VAC - 最小值
关闭电压(最大): 3.75 VDC
关闭电压(最小): 0.5 VDC
特点: 绝缘 - F 类
安装类型: 通孔
端接类型: PC 引脚
包装: 散装
触点材料: 银锡氧化物(AgSnO)
操作时间: 20ms
释放时间: 10ms
线圈功率: 800 mW
线圈电阻: 31 欧姆
工作温度: -55°C ~ 85°C

JT-N
2. 1 Form C Sealed type
Nominal coil voltage
5V DC
6V DC
9V DC
12V DC
15V DC
18V DC
24V DC
PCB type
JTN1S-PA-F-DC5V
JTN1S-PA-F-DC6V
JTN1S-PA-F-DC9V
JTN1S-PA-F-DC12V
JTN1S-PA-F-DC15V
JTN1S-PA-F-DC18V
JTN1S-PA-F-DC24V
Part No.
TMP type
JTN1S-TMP-F-DC5V
JTN1S-TMP-F-DC6V
JTN1S-TMP-F-DC9V
JTN1S-TMP-F-DC12V
JTN1S-TMP-F-DC15V
JTN1S-TMP-F-DC18V
JTN1S-TMP-F-DC24V
Standard packing: PCB type: Carton: 50 pcs.; Case: 500 pcs.
TMP type: Carton: 50 pcs.; Case: 300 pcs.
RATING
1. Coil data
Nominal coil
voltage
Pick-up voltage
(at 20 ° C 68 ° F )
Drop-out voltage
(at 20 ° C 68 ° F )
Nominal operating
current
[ ± 10%] (at 20 ° C 68 ° F )
Coil resistance
[ ± 10%] (at 20 ° C 68 ° F )
Nominal operating
power
Max. applied voltage
(at 20 ° C 68 ° F )
5V DC
6V DC
161.3mA
133.3mA
31 ?
45 ?
6 V
7.2V
9V DC
12V DC
15V DC
75%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
89.1mA
66.6mA
53.4mA
101 ?
180 ?
281 ?
800mW
10.8V
14.4V
18 V
18V DC
24V DC
44.4mA
33.3mA
405 ?
720 ?
21.6V
28.8V
2. Speci?cations
Characteristics
Contact
Rating
Item
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (reference value)* 1
Insulation resistance (Initial)
Speci?cations
AgSnO 2 type
1 Form A 1 Form C
Max. 50 m ? (By voltage drop 6 V DC 1A)
20A 277V AC N.C.: 10A 277V AC, N.O.: 20A 277V AC
8,310VA (30A 277V AC) N.C.: 2,770VA, N.O.: 5,540VA
277V AC
30A N.C.: 10A, N.O.: 20A
Approx. 800mW
100mA, 5V DC
Min. 100M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown voltage
Between open contacts
1,200 Vrms for 1 min. (Detection current: 10 mA)
Electrical
characteristics
(Initial) Between contact and coil
Surge breakdown voltage* 2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20 ° C 68 ° F )
Release time (at nominal voltage) (at 20 ° C 68 ° F )
2,500 Vrms for 1 min. (Detection current: 10 mA)
Max. 20 ms (excluding contact bounce time.)
Max. 10 ms (excluding contact bounce time) (Without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Mechanical
Functional
Destructive
Functional
Destructive
Min. 98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
Min. 980 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.5 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 2 mm
Min. 1 × 10 7
Expected life
Electrical (at 20 times/min.)* 3
Min. 1 × 10 5 (20A 277V AC at resistive load)
N.O.: Min. 1 × 10 5
(20A 277V AC at resistive load)
N.C.: Min. 1 × 10 5
(10A 277V AC at resistive load)
Conditions
Conditions for operation, transport and storage* 4
Ambient temperature: –55 ° C to +85 ° C –67 ° F to +185 ° F ,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Max. operating speed
20 times/min. (at nominal switching capacity)
PCB type: Approx. 25 g .88 oz
TMP type: Approx. 30 g 1.06 oz
* Speci?cations will vary with foreign standards certi?cation ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ± 1.2 × 50 μ s according to JEC-212-1981
*3. In order to obtain the full rated life cycles, the relay should be properly vented by removing the vent nib. More detail, please look at caution for NOTES.
*4. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
ASCTB187E 201202-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
相关PDF资料
PDF描述
JTN1AG-PA-F-DC15V RELAY GEN PURPOSE SPST 30A 15V
FOD053L OPTOCOUPLER TRANS 2CH 3.3V 8SOIC
JTN1AG-PA-F-DC12V RELAY GEN PURPOSE SPST 30A 12V
6N139S OPTOCOUPLER DARL SPLIT 8-SMD
77063822 RES ARRAY 8.2K OHM 3 RES 6-SIP
相关代理商/技术参数
参数描述
JTN1AG-PA-F-DC6V 功能描述:通用继电器 1 Form A 6VDC Relay Dust cover PCB RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料:
JTN1AG-PA-F-DC9V 功能描述:通用继电器 1 Form A 9VDC Relay Dust cover PCB RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料:
JTN1AG-TMP-F-DC12V 功能描述:通用继电器 1 Form A 12VDC Relay Dust cover TMP RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料:
JTN1AG-TMP-F-DC15V 功能描述:通用继电器 1 Form A 15VDC Relay Dust cover TMP RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料:
JTN1AG-TMP-F-DC18V 功能描述:通用继电器 30A 18VDC DUST CVR TMP POWER RELAY RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: