- 您现在的位置：买卖IC网 > PDF目录224102 > JVN1A-4.5V (PANASONIC CORP) Flat Power Relay, 1 Form A, 16A 125VDC PDF资料下载
参数资料
| 型号： | JVN1A-4.5V |
| 厂商： | PANASONIC CORP |
| 元件分类： | 功率/信号继电器 |
| 英文描述： | Flat Power Relay, 1 Form A, 16A 125VDC |
| 中文描述： | POWER/SIGNAL RELAY, SPST, MOMENTARY, 0.044A (COIL), 4.5VDC (COIL), 200mW (COIL), 10A (CONTACT), 30VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT |
| 文件页数： | 1/2页 |
| 文件大小： | 94K |
| 代理商： | JVN1A-4.5V |
JV-N
SPECIFICATIONS
COMPACT FLAT POWER
RELAY FOR HEATER LOADS
JV-N
RELAYS
22
.866
16
.630
10.9
.429
FEATURES
High 16 A capacity
The contacts are high capacity 16A,
125 V AC.
Compact, at type with low 10.9 mm
.429 inch height
Compact at type with low surface area
of 16
× 22 mm .630 × .866 inch and
height of 10.9 mm .429 inch.
High sensitivity at 200 mW
High sensitivity at 200 mW coil power
consumption.
Represses contact terminal heat
The contact terminals are larger and
thicker compared to the existing JV relay.
This limits the rise in temperature of the
terminals when there is a large current
owing to approx. 28
°C 62°F (normal
current of 16 A).
Conforms to the various safety
standards
UL/CSA, TV approved.
Contact
Coil
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specications will vary with foreign standards certication ratings.
*1 Excluding contact bounce time
*2 Excluding contact bounce time, without diode
*3 By resistive method; nominal voltage applied to the coil; contact carrying current:
16A, at 70
°C 158°F
*4 Nominal voltage applied to the coil, at 60
°C 140°F
*5 Half-wave pulse of sine wave: 11 ms; detection time: 10
s
*6 Half-wave pulse of sine wave: 6 ms
*7 Detection time: 10
s
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT
Characteristics
Arrangement
1 Form A
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Max. 30 m
Contact material
Silver alloy
Rating
(resistive
load)
Nominal switching
capacity
16 A 125 V AC, 10 A 277 V AC
10 A 30 V DC, 10 A 125 V AC
Max. switching power
2,770 VA, 300 W
Max. switching voltage
277 V AC, 30 V DC
Max. switching current
16 A (AC 125 V), 10 A (DC)
Min. switching capacity#1
100 mA, 5 V DC
Expected life (min. ope.)
Mechanical (at 180 cpm)
2
×107
Electrical
at resistive
load
(at 20 cpm)
Sealed type
16 A 125 V AC,
10 A 30 V DC
105
Flux-resistant type
10 A 125 V AC
3
×105
Nominal operating power
200 mW (DC 4.5 to 48 V)
600 mW (DC 100 V)
Max. operating speed
20 cpm
Operate time*1 (at nominal voltage)
Max. 12 ms (DC 4.5 V to 48 V)
Max. 8 ms (DC 100 V)
Release time*2 (at nominal voltage)
Max. 5 ms
Initial insulation resistance
Min. 1,000 M
(at 500 V DC)
Initial breakdown
voltage
(Detection
current: 10 mA
Between open
contacts
1,000 Vrms for 1 min.
Between contacts
and coil
2,500 Vrms for 1 min.
Surge voltage between contact and
coil
Min. 4,500 V
Temperature rise
Max. 45
°C (DC 4.5 V to 48 V) *3
Max. 55
°C (DC 100 V)*4
Conditions in case of operation,
transport and storage*8
Ambient temperature
–40 to 70
°C –40 to 158°F
(DC 4.5 to 48 V)
–40 to 60
°C –40 to 140°F
(DC 100V)
Humidity: 5 to 85 % R.H.
(Note freezing and condensing
at low temperature)
Air pressure: 86 to 106 kPa
Shock resistance
Functional
Min. 200 m/s2{20G}*5
Destructive
Min. 1,000 m/s2{100G}*6
Vibration
resistance
Functional
10 to 55 Hz *7
at double amplitude of 1.6 mm
Destructive
10 to 55 Hz at double
amplitude of 2 mm
Unit weight
Approx. 8g .28 oz
TYPICAL APPLICATIONS
AV equipment: TV's, VTR's, etc.
OA equipment
HA equipment
ORDERING INFORMATIONS
Contact arrangement
Protective construction
UL/CSA, TV approved type is standard.
Coil voltage (DC)
4.5, 6, 9, 12,
18, 24, 48, 100 V
1a:
1 Form A
Nil:
F:
Sealed type
Flux-resistant type
Ex. JVN
1a
4.5 V
F –
All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.
相关PDF资料 |
PDF描述 |
|---|---|
| JVN1A-48V | Flat Power Relay, 1 Form A, 16A 125VDC |
| JVN1A-6V | Flat Power Relay, 1 Form A, 16A 125VDC |
| JVN1A-9V | Flat Power Relay, 1 Form A, 16A 125VDC |
| JVN1AF-100V | Flat Power Relay, 1 Form A, 16A 125VDC, Flux Resistant |
| JVN1AF-12V | Flat Power Relay, 1 Form A, 16A 125VDC, Flux Resistant |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JVN1A-48V | 功能描述:RELAY GEN PURPOSE SPST 16A 48V RoHS:是 类别:继电器 >> 功率，高于 2 安 系列:JV-N 产品目录绘图:Slim CT Series Footprint Slim CT Series Circuit Slim CT Series 标准包装:30 系列:ACT 继电器类型:自动 线圈类型:无锁存 线圈电流:66.7mA 线圈电压:12VDC 触点形式:SPDT（1 C 型） 触点额定值（电流）:20A 切换电压:14VDC -标称 关闭电压（最大）:7.2 VDC 关闭电压（最小）:1 VDC 特点:- 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:银合金，无镉 操作时间:10ms 释放时间:10ms 线圈功率:800 mW 线圈电阻:180 欧姆 工作温度:-40°C ~ 85°C 产品目录页面:2609 (CN2011-ZH PDF) 其它名称:255-2591ACT112-ND |
| JVN1A-48V-F | 功能描述:通用继电器 1 Form A 16A 125VDC 48V RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| JVN1A5FJ | 制造商:Panasonic Electric Works 功能描述: |
| JVN1A-5V | 功能描述:RELAY GEN PURPOSE SPST 16A 5V RoHS:是 类别:继电器 >> 功率，高于 2 安 系列:JV-N 产品目录绘图:Slim CT Series Footprint Slim CT Series Circuit Slim CT Series 标准包装:30 系列:ACT 继电器类型:自动 线圈类型:无锁存 线圈电流:66.7mA 线圈电压:12VDC 触点形式:SPDT（1 C 型） 触点额定值（电流）:20A 切换电压:14VDC -标称 关闭电压（最大）:7.2 VDC 关闭电压（最小）:1 VDC 特点:- 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:银合金，无镉 操作时间:10ms 释放时间:10ms 线圈功率:800 mW 线圈电阻:180 欧姆 工作温度:-40°C ~ 85°C 产品目录页面:2609 (CN2011-ZH PDF) 其它名称:255-2591ACT112-ND |
| JVN1A-5V-FJ | 制造商:Panasonic Electric Works 功能描述:RELAY PCB SPNO 16A 5VDC 制造商:Panasonic Electric Works 功能描述:RELAY, PCB, SPNO, 16A, 5VDC 制造商:Panasonic Electric Works 功能描述:RELAY, PCB, SPNO, 16A, 5VDC; Relay Type:Power; Coil Voltage VDC Nom:5V; Contact Current Max:16A; Contact Voltage AC Nom:125V; Contact Voltage DC Nom:30V; Coil Resistance:101ohm; Contact Configuration:SPST-NO; Coil Type:DC; Coil ;RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。