- 您现在的位置：买卖IC网 > PDF目录6905 > JW2ASN-DC5V (Panasonic Electric Works)RELAY GENERAL PURPOSE DPST 5A 5V PDF资料下载
参数资料
| 型号： | JW2ASN-DC5V |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 3/6页 |
| 文件大小： | 0K |
| 描述： | RELAY GENERAL PURPOSE DPST 5A 5V |
| 其它有关文件： | Standards Chart |
| 产品目录绘图： | JW Series PCB JW2ASN Footprint JW2ASN Circuit |
| 标准包装： | 100 |
| 系列： | JW |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 106mA |
| 线圈电压： | 5VDC |
| 触点形式： | DPST（2 A 型） |
| 触点额定值（电流）： | 5A |
| 切换电压： | 250VAC，30VDC - 最小值 |
| 关闭电压（最大）： | 3.5 VDC |
| 关闭电压（最小）： | 0.5 VDC |
| 特点： | 密封式 - 全部 |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 散装 |
| 触点材料： | 银镍（AgNi） |
| 操作时间： | 15ms |
| 释放时间： | 5ms |
| 线圈功率： | 530 mW |
| 线圈电阻： | 47 欧姆 |
| 工作温度： | -40°C ~ 60°C |
| 产品目录页面： | 2610 (CN2011-ZH PDF) |
| 相关产品： | 255-1821-ND - SOCKET PCB FOR JW2 RELAYS |
| 其它名称： | 255-2225 JW2ASN-DC5V-ND |
JW
2. Speci?cations
Characteristics
Item
Standard type
Speci?cations
High capacity type
Contact material
1 Form A: AgSnO 2 type
1 Form C, 2 Form A and 2 Form C: AgNi type
Contact
Rating
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Min. switching capacity (reference value)* 1
Insulation resistance (Initial)
Between open contacts
1 Form A, 1 Form C, 2 Form A and 2 Form C 1 Form A and 1 Form C
Max. 100 m ? (By voltage drop 6 V DC 1A)
5A 250V AC, 5A 30V DC 10A 250V AC, 10A 30V DC
1,250VA, 150W 2,500VA, 300W
250V AC, 30V DC
5A 10A
100mA, 5V DC
Min. 1,000M ? (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
Breakdown voltage
(Initial)
Between contact and coil
Between contact sets
5,000 Vrms for 1 min. (Detection current: 10 mA)
3,000 Vrms for 1 min. (2 Form A, 2 Form C) (Detection current: 10 mA)
Electrical
characteristics
Temperature rise (coil)
1 Form A: Max. 45 ° C 113 ° F ,
1 Form C, 2 Form A and 2 Form C:
Max. 55 ° C 131 ° F
(resistive method, with nominal coil voltage and
at nominal switching capacity, at 20 ° C 68 ° F )
1 Form A: Max. 45 ° C 113 ° F ,
1 Form C: Max. 55 ° C 131 ° F
(resistive method, with nominal coil voltage and
at nominal switching capacity, at 20 ° C 68 ° F )
Surge breakdown voltage* 2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20 ° C 68 ° F )
Release time (at nominal voltage) (at 20 ° C 68 ° F )
10,000 V
Max. 15 ms (excluding contact bounce time.)
Max. 5 ms (excluding contact bounce time) (Without diode)
Mechanical
characteristics
Shock resistance
Vibration resistance
Functional
Destructive
Functional
Destructive
98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s.)
980 m/s 2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10 μ s.)
10 to 55 Hz at double amplitude of 2.0 mm
Expected life
Mechanical (at 180 times/min.)
Electrical (at 6 times/min.)
Min. 5 × 10 6
Min. 10 5 (at resistive load)
Conditions
Unit weight
Conditions for operation, transport and storage* 3
Max. operating speed
(at nominal switching capacity)
Ambient temperature* 4 : –40 ° C to +60 ° C –40 ° F to 140 ° F (Class E),
(Class B: –40 ° C to +85 ° C –40 ° F to 185 ° F )
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Flux-resistant type: 20 times/min., Sealed type: 6 times/min.
Approx. 13 g .46 oz
* Speci?cations will vary with foreign standards certi?cation ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ± 1.2 × 50 μ s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
*4. The pick-up and drop out voltages rise approximately 0.4% for every 1 ° C 33.8 ° F given a standard ambient temperature of 20 ° C 68 ° F . Therefore, when using relays
where the ambient temperature is high, please take into consideration the rise in pick-up and drop out voltages and keep the coil applied voltage within the
maximum applied voltage.
REFERENCE DATA
JW 1 Form A Standard (5A) type
1. Maximum operating power
100
2. Operate/release time
Sample: JW1aSN-DC12V-F, 10 pcs.
Ambient temperature: 20 ° C 68 ° F
10
3. Life curve
1 Form A Standard (5 A) type
100
Operate time
10
x-
1
DC resistiv e AC resistive
load load
5
Max.
Min.
10
250 V AC resistive load
30 V DC resistive load
x-
Release time
Max.
Min.
10
100
1,000
0
80
90
100
110
120
5
10
15
Contact voltage, V
Coil applied voltage, %V
Contact current, A
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB190E 201210-T
相关PDF资料 |
PDF描述 |
|---|---|
| 962884-1 | FLACHSTECK 2,8 SPEZ |
| OSTHX020080 | TERM BLOCK SPRING 5.00MM 2POS |
| 22-01-2095 | CONN HSNG 9POS .100 W/RAMP/RIB |
| OSTHB021181 | CONN TERM BLOCK 2POS 10MM |
| OSTHE025040 | CONN TERM BLOCK 2.54MM 2POS PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JW2ASN-DC5V-F | 制造商:Panasonic Electric Works 功能描述:NAIS BRAND RELAY |
| JW2ASN-DC6V | 功能描述:通用继电器 2 Form A 5A 250VAC 6V RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| JW2ASN-DC9V | 功能描述:通用继电器 2 Form A 5A 250VAC 9V RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| JW2EN-B-DC12V | 制造商:Panasonic Electric Works 功能描述: |
| JW2EN-B-DC24V | 制造商:Panasonic Electric Works 功能描述: |
发布紧急采购，3分钟左右您将得到回复。