- 您现在的位置：买卖IC网 > Datasheet目录865 > JWK316BJ106KD-T (Taiyo Yuden)CAP CER 10UF 6.3V 10% X5R 0612 Datasheet资料下载
参数资料
| 型号： | JWK316BJ106KD-T |
| 厂商： | Taiyo Yuden |
| 文件页数： | 17/21页 |
| 文件大小： | 0K |
| 描述： | CAP CER 10UF 6.3V 10% X5R 0612 |
| 产品变化通告： | X5R, X7R Part Number Change |
| 产品目录绘图： | xMK Series_0612 |
| 标准包装： | 1 |
| 系列： | JWK |
| 电容： | 10µF |
| 电压 - 额定： | 6.3V |
| 容差： | ±10% |
| 温度系数： | X5R |
| 安装类型： | 表面贴装，MLCC |
| 工作温度： | -55°C ~ 85°C |
| 应用： | 旁通，去耦 |
| 封装/外壳： | 1206（3216 公制）宽（长侧）0612（1632 公制） |
| 尺寸/尺寸： | 0.063" L x 0.126" W（1.60mm x 3.20mm） |
| 厚度（最大）： | 0.037"（0.95mm） |
| 特点： | 低 ESL 型（倒置结构） |
| 包装： | 标准包装 |
| 产品目录页面： | 2171 (CN2011-ZH PDF) |
| 其它名称： | 587-1267-6 |
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Precautions on the use of Multilayer Ceramic Capacitors
■ PRECAUTIONS
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
Precautions
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
Precautions
（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations （Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations （Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions
（unit: mm）
Land patterns for PCBs
Land pattern
Wave-soldering
Chip capacitor
Solder-resist
Type
107
212
316
325
Size
L 1.6 2.0 3.2 3.2
W 0.8 1.25 1.6 2.5
A 0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
B 0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
C
B A B
C 0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
Chip capacitor
W
Technical
considerations
Reflow-soldering
L
Type
042
063
105
107
212
316
325
432
Size
L 0.4 0.6 1.0
W 0.2 0.3 0.5
A 0.15 to 0.25 0.20 to 0.30 0.45 to 0.55
B 0.15 to 0.20 0.20 to 0.30 0.40 to 0.50
C 0.15 to 0.30 0.25 to 0.40 0.45 to 0.55
1.6 2.0 3.2
0.8 1.25 1.6
0.8 to 1.0 0.8 to 1.2 1.8 to 2.5
0.6 to 0.8 0.8 to 1.2 1.0 to 1.5
0.6 to 0.8 0.9 to 1.6 1.2 to 2.0
3.2
2.5
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
4.5
3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
Note：Recommended land size might be different according
to the allowance of the size of the product.
●LWDC: Recommended land dimensions for reflow-soldering
（unit: mm）
LWDC
Type
105
107
212
Size
L 0.52 0.8 1.25
W 1.0 1.6 2.0
A 0.18 to 0.22 0.25 to 0.3 0.5 to 0.7
B 0.2 to 0.25 0.3 to 0.4 0.4 to 0.5
C 0.9 to 1.1 1.5 to 1.7 1.9 to 2.1
L
W
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
相关PDF资料 |
PDF描述 |
|---|---|
| KCM55QR71J106KH01K | CAP CER 10UF 63V 10% X7R 2220 |
| KMF1.1123.1101 | KMF POWER ENTRY MODULE W FILTER |
| KNA16300C16MA7TS | FILTER CAP ARRAY 16PF 35MA 25V |
| KNH21C104DA3T | FILTER CAP .10UF 2A 25V 0805 |
| KRM55WR71E476MH01K | CAP CER 47UF 25V 20% X7R 2220 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JWL11BA | 制造商:NKK 制造商全称:Nihon Kaiheiki Industry Co. Ltd. 功能描述:Internationally Approved TV Rated Rockers |
| JWL11BA1 | 制造商:NKK 制造商全称:Nihon Kaiheiki Industry Co. Ltd. 功能描述:Internationally Approved TV Rated Rockers |
| JWL11BA1A-A | 功能描述:摇臂开关与扳钮开关 SPST TV8 RTD BLK CAP BODY/BARIR HORZ"O I" RoHS:否 制造商:C&K Components 触点形式: 开关功能: 电流额定值:50 mA 电压额定值 AC: 电压额定值 DC:30 V 功率额定值: 端接类型: 执行器:Paddle 颜色: 安装风格:Panel 端子密封: 触点电镀: 照明:Not Illuminated 照明颜色: |
| JWL11BA2 | 制造商:NKK 制造商全称:Nihon Kaiheiki Industry Co. Ltd. 功能描述:Internationally Approved TV Rated Rockers |
| JWL11BA2A-A | 功能描述:摇臂开关与扳钮开关 SPST TV8 RATED BLK BARIER/CAP VERT MARK RoHS:否 制造商:C&K Components 触点形式: 开关功能: 电流额定值:50 mA 电压额定值 AC: 电压额定值 DC:30 V 功率额定值: 端接类型: 执行器:Paddle 颜色: 安装风格:Panel 端子密封: 触点电镀: 照明:Not Illuminated 照明颜色: |
发布紧急采购，3分钟左右您将得到回复。