
R
O
C
K
E
R
S
W
IT
C
H
E
S
SEALED, ILLUMINATED ROCKER SWITCHES
SNAP-IN
ROCKERS
K2
Specifications Subject To Change Without Notice
www.ottoexcellence.com
81
LOW COST, SNAP-IN ROCKER FOR WET AND DUSTY ENVIRONMENTS; 1 AND 2 POLES
Lens Color
Position
“A”
“C”
A. No Lens
B. Red
C. Green
D. Amber
E. Clear
Light/Circuit Location
A. No Light
Dependent Light ON
in Position “A”
Wired to Terms 1 & 7
Dependent Light ON
in Position “A”
Wired to Terms 1 & 7
Dependent Light ON
in Position “C”
Wired to Terms 2 & 8
Independent Light ON
in Position “A”
Wired to Terms 7 & 8
Dependent Light ON
in Position “C”
Wired to Terms 2 & 8
Dependent Light ON
in Position “C”
Wired to Terms 2 & 8
Independent Light
at Position “A”
Wired to Terms 7 & 8
Independent Light ON
in Position “A”
Wired to Terms 3 & 7
Independent Light ON
at Position “C”
Wired to Terms 4 & 8
Not available in
Double Throw/
Double Pole
Independent Light
at Position “C”
Wired to Terms 7 & 8
D= Dependent
I= Independent
Dependent Light ON
in Position “A”
Wired to Terminals 1 &
7
Independent Light
at Position “C”
Wired to Terms 7 & 8
Legend and Orientation
A. None
N U M B E R I N G C O D E
XX
X
LED anode (+) terminal number shown in bold
Light on OFF side must be independent
Contact factory for multiple light types in
the same switch
NOTES
No momentary switches with dependent lights
Neon lamp only to be coded with clear or amber lenses
LED lenses must be clear or same color as the lens
No dependent light in OFF positions
All legends will be White except for actuator code
C, F, J, M & R will be Black
K2 Connector part number C801765
Recommended Quick Connect Terminals:
- AMP 60253-2 for 12-16 AWG wire with .160"-.210" insulation OD
- AMP 42100-2 for 14-18 AWG wire with .100"-.170" insulation OD
K2 Panel Plug part number C100695-2