
Schraubanschlussklemmen, Raster 5,0 mm
Screw terminal blocks, pitch 5.0 mm
Borniers de raccordement à vis, pas 5,0 mm
Verpackung: lose im Karton
Packaging: in bulk, in a cardboard box
Emballage: en vrac, dans un carton
KRMK
*a
*b
*a Bohrung der Leiterplatte 1,3 mm
bore hole of printed circuit board 1.3 mm
perage de la carte imprimée 1,3 mm
*b teilungsgerechte Schwalbenschwanzverbindung
dovetail joint without loss of pitch
embotement par queue d’hirondelle sans perte de pas
*c Kombischraube (Kreuzschlitz/Schlitz) Z1 (Pozidriv)
combined screw (cross recession/slot) Z1 (Pozidriv)
vis combinée (fentes en croix/fente normale) Z1 (Pozidriv)
*c
-Reg.-Nr. B947
KRMK 02
2
200
10,0
KRMK 03
3
200
15,0
KRMK 04
4
200
20,0
KRMK 06
6
200
30,0
KRMK 07
7
200
35,0
KRMK 08
8
200
40,0
Bestellbezeichnung
Polzahl
VE
Abmessungen
Designation
Poles
PU
Dimensions
Désignation
Ples
UE
Dimensions
L (mm)
Schraubanschlussklemme, Klemmkrper mit Drahtschutz,
stehend, teilungsgerecht anreihbar, mit Kombischraube
(Kreuzschlitz/Schlitz)
1. Temperaturbereich
-25 °C/+100 °C
2. Werkstoffe
Kontakttrger
PA, V2 nach UL 94
Klemmkrper
CuZn, unternickelt und verzinnt
Drahtschutz
CuSn, vernickelt
Schraube
Stahl, verzinkt und chromatiert
3. Mechanische Daten
Schraube
M3 – Z1 Pozidriv
Prüfdrehmoment1
0,4 Nm
Anschliebare Leiter Schraubanschluss
max. Querschnitt
2,5 mm2
Leitungsaufbau und andere freigegebene Leiter auf Anfrage
4. Elektrische Daten
Bemessungsstrom
15 A
Bemessungsspannung2
250 V AC, ohne Leiterplatte
Prüfspannung
2,5 kV eff./60 s
Kriechstrecke2
≥ 3,0 mm
Luftstrecke2
≥ 3,0 mm
Kriechstromfestigkeit
CTI 600
1
nach UL und CSA
2
nach DIN EN 60664/IEC 60664
Bornier de raccordement à vis, cage avec protège-fil, droite,
embotable sans perte de pas, avec vis combinée (fentes en
croix/fente normale)
1. Température d’utilisation
-25 °C/+100 °C
2. Matériaux
Corps isolant
PA, V2 suivant UL 94
Cage
CuZn, sous-nickelé et étamé
Protège-fil
CuSn, nickelé
Vis
acier, zingué et chromaté
3. Caractéristiques mécaniques
Vis
M3 – Z1 Pozidriv
Couple de serrage de test1
max. 0,4 Nm
Conducteurs raccordables à la borne
Section max.
2,5 mm2
Composition du cble et autres cbles approuvés sur demande
4. Caractéristiques électriques
Courant assigné
15 A
Tension assignée2
250 V AC, sans carte imprimée
Tension de claquage
2,5 kV eff./60 s
Distance d’isolement2
≥ 3,0 mm
Ligne de fuite2
≥ 3,0 mm
Tenue de claquage
CTI 600
1
suivant UL et CSA
2
suivant DIN EN 60664/CEI 60664
Screw terminal block, clamp with wire protector, upright,
consecutive placement without loss of pitch, with combined
screw (cross recession/slot)
1. Temperature range
-25 °C/+100 °C
2. Materials
Insulating body
PA, V2 according to UL 94
Clamp
CuZn, pre-nickeled and tinned
Wire protector
CuSn, nickeled
Screw
steel, zincked and chromated
3. Mechanical data
Screw
M3 – Z1 Pozidriv
Test tightening torque/screw1
0.4 Nm
Connectable conductors screw terminal
max. section
2.5 mm2
Cable construction and further approved cables on request
4. Electrical data
Rated current
15 A
Rated voltage2
250 V AC, without printed circuit board
Test voltage
2.5 kV eff./60 s
Creepage distance2
≥ 3.0 mm
Clearance2
≥ 3.0 mm
Tracking resistance
CTI 600
1
according to UL and CSA
2
according to DIN EN 60664/IEC 60664
www.lumberg.com
12/2009