参数资料
型号: KSZ8051RNL TR
厂商: Micrel Inc
文件页数: 15/59页
文件大小: 0K
描述: TXRX PHY 10/T100 3.3V RMII 32QFN
特色产品: KSZ8051/8031/8021 Series
标准包装: 1
类型: PHY 收发器
驱动器/接收器数: 1/1
规程: RMII
电源电压: 1.8V,2.5V,3.3V
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘
供应商设备封装: 32-QFN 裸露焊盘(5x5)
包装: 标准包装
其它名称: 576-3778-6
Micrel, Inc.
KSZ8051MNL/RNL
July 2010
22
M9999-070910-1.0
MII Signal Definition
The following table describes the MII signals. Refer to Clause 22 of the IEEE 802.3 Specification for detailed information.
MII
Signal Name
Direction
(with respect to PHY,
KSZ8051MNL signal)
Direction
(with respect to MAC)
Description
TXC
Output
Input
Transmit Clock
(2.5MHz for 10Mbps; 25MHz for 100Mbps)
TXEN
Input
Output
Transmit Enable
TXD[3:0]
Input
Output
Transmit Data [3:0]
RXC
Output
Input
Receive Clock
(2.5MHz for 10Mbps; 25MHz for 100Mbps)
RXDV
Output
Input
Receive Data Valid
RXD[3:0]
Output
Input
Receive Data [3:0]
RXER
Output
Input, or (not required)
Receive Error
CRS
Output
Input
Carrier Sense
COL
Output
Input
Collision Detection
Table 1. MII Signal Definition
Transmit Clock (TXC)
TXC is sourced by the PHY. It is a continuous clock that provides the timing reference for TXEN and TXD[3:0].
TXC is 2.5MHz for 10Mbps operation and 25MHz for 100Mbps operation.
Transmit Enable (TXEN)
TXEN indicates the MAC is presenting nibbles on TXD[3:0] for transmission. It is asserted synchronously with the first
nibble of the preamble and remains asserted while all nibbles to be transmitted are presented on the MII, and is negated
prior to the first TXC following the final nibble of a frame.
TXEN transitions synchronously with respect to TXC.
Transmit Data [3:0] (TXD[3:0])
TXD[3:0] transitions synchronously with respect to TXC. When TXEN is asserted, TXD[3:0] are accepted for transmission
by the PHY. TXD[3:0] is ”00” to indicate idle when TXEN is de-asserted. Values other than “00” on TXD[3:0] while TXEN
is de-asserted are ignored by the PHY.
Receive Clock (RXC)
RXC provides the timing reference for RXDV, RXD[3:0], and RXER.
In 10Mbps mode, RXC is recovered from the line while carrier is active. RXC is derived from the PHY’s reference
clock when the line is idle, or link is down.
In 100Mbps mode, RXC is continuously recovered from the line. If link is down, RXC is derived from the PHY’s
reference clock.
RXC is 2.5MHz for 10Mbps operation and 25MHz for 100Mbps operation.
Receive Data Valid (RXDV)
RXDV is driven by the PHY to indicate that the PHY is presenting recovered and decoded nibbles on RXD[3:0].
In 10Mbps mode, RXDV is asserted with the first nibble of the SFD (Start of Frame Delimiter), “5D”, and remains
asserted until the end of the frame.
In 100Mbps mode, RXDV is asserted from the first nibble of the preamble to the last nibble of the frame.
RXDV transitions synchronously with respect to RXC.
相关PDF资料
PDF描述
MAX991EUA+T IC COMPARATOR R-R 8-UMAX
MAX990ESA+T IC COMPARATOR R-R 8-SOIC
MAX991ESA+T IC COMPARATOR R-R 8-SOIC
MAX989EUA+T IC COMPARATOR R-R 8-UMAX
MAX989ESA+T IC COMPARATOR R-R 8-SOIC
相关代理商/技术参数
参数描述
KSZ8051RNLU TR 功能描述:以太网 IC Single-Port 10/100BT PHY (Automotive) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8051RNLU-TR 功能描述:1/1 Transceiver Full RMII 32-QFN (5x5) 制造商:microchip technology 系列:- 包装:剪切带(CT) 零件状态:停产 类型:收发器 协议:RMII 驱动器/接收器数:1/1 双工:全 接收器滞后:- 数据速率:- 电压 - 电源:1.8V,2.5V,3.3V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:32-VFQFN 裸露焊盘 供应商器件封装:32-QFN(5x5) 标准包装:1
KSZ8081MLXCA 功能描述:以太网 IC 10/100 PHY, 0.11u RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8081MLXCA TR 功能描述:以太网 IC 10/100 PHY, 0.11u RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8081MLXCATR 制造商:Micrel Inc 功能描述:Ethernet Transceiver,PHY,MII,LQFP48