参数资料
| 型号： | KSZ8999 |
| 厂商： | Micrel Inc |
| 文件页数： | 8/52页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH 10/100 9PORT 208PQFP |
| 标准包装： | 24 |
| 系列： | * |
| 类型： | * |
| 应用： | * |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 208-MQFP，208-PQFP |
| 供应商设备封装： | 208-PQFP（28x28） |
| 包装： | 托盘 |
| 产品目录页面： | 1081 (CN2011-ZH PDF) |
| 配用： | 576-1644-ND - BOARD EVALUATION FOR KSZ8999 |
| 其它名称： | 576-1044 |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页
KS8999
Micrel
KS8999
16
January 2005
Group
I/O Names
Active Status
Description(Note 1)
LED[9][1]
Programs port duplex (full / half) on port 7. This is only effective if auto-negotiation is
disabled or if this end has auto-negotiation enabled and the far end has auto-
negotiation disabled.
D = Full-duplex, F/U = Half-duplex (default)
LED[9][0]
Programs port duplex (full / half) on port 8. This is only effective if auto-negotiation is
disabled or if this end has auto-negotiation enabled and the far end has auto-
negotiation disabled.
D = Full-duplex, F/U = Half-duplex (default)
LED[6][3]
Programs back-off aggressiveness for half-duplex mode
D = Less aggressive back-off, F/U = More aggressive back-off (default)
LED[6][2]
Programs retries for frames that encounter collisions.
D = Drop frame after 16 collisions, F/U = Continue sending frame regardless of the
number of collisions (default)
LED[6][1:0]
Reserved – use float configuration
LED[7][3]
Programs flow control
D = No flow control, F/U = Flow control enabled (default)
LED[7][2]
Programs broadcast storm protection.
D = 5% broadcast frames allowed, F/U = Unlimited broadcast frames (default)
LED[7][1]
Programs buffer sharing feature.
D = Equal amount of buffers per port (113 buffers), F/U = Share buffers up to 512
buffers on a single port (default)
LED[7][0]
Reserved – use float configuration
LED[8][3]
Programs address aging.
D = Aging disabled, F/U = Enable 5 minute aging (default)
LED[8][2]
Programs frame length enforcement.
D = Max length for VLAN is 1522 bytes and without VLAN is 1518 bytes
F/U = Max length is 1536 bytes (default)
LED[8][1]
Reserved
LED[8][0]
Programs half-duplex back pressure.
D = No half-duplex back pressure, F/U = Half-duplex back pressure enabled (default)
MRXD[3]
Programs port 9 speed
D = 10Mbps, F/U = 100Mbps (default)
MRXD[2]
Programs port 9 duplex
D = Half-duplex, F/U = Full duplex (default)
MRXD[1]
Programs port 9 flow control
D = Flow control, F/U = No flow control (default)
MRXD[0]
D = reserved, F/U = normal operation (default)
CTRL
EN1P
H
Enable 802.1p for all ports – this enables QoS based on the priority field in the layer
2 header.
0 = 802.1p selected by port in EEPROM
1 = Use 802.1p priority field unless disabled in EEPROM
Note: This is also controlled by the EEPROM registers (registers 4-12 bit 4). The values
in the EEPROM supercede this pin. Also, if the priority selection is unaltered in the
EEPROM registers (register 3 bits 0-7) then values above 3 are considered high priorty
and less than 4 are low priority.
MIIS[1:0]
H
MII mode selection – allows the MII to run in the following modes
MIIS
Operating mode
10
0
Disable MII interface
0
1
Reverse MII
1
0
Forward MII
1
7 wire mode (SNI)
Note 1.
All unmanaged programming takes place at reset time only. For unmanaged programming: F = Float, D = Pull-down, U = Pull-up.
See
“Reference Circuits” section.
相关PDF资料 |
PDF描述 |
|---|---|
| KSZ8997 | IC SWITCH 10/100 8PORT 128PQFP |
| KSZ8995FQI | IC SWITCH 10/100 5PORT 128-PQFP |
| AD9970BCPZ | IC PROCESSOR CCD SIGNAL 32LFCSP |
| ADP5587ACPZ-R7 | IC EXPANDER/KEYBOARD CTRLR |
| LFXP3E-4TN144C | IC FPGA 3.1KLUTS 100I/O 144-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| KSZ8999-EVAL | 功能描述:以太网开发工具 KSZ8999 Evaluation Board RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压: |
| KSZ8999-EVAL | 制造商:Micrel Inc 功能描述:BOARD EVALUATION FOR KSZ8999 |
| KSZ8999I | 功能描述:以太网 IC 8 Port 10/100 Switch plus MII with PHY and Frame Buffers I-temp (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
| KSZ9021GN | 功能描述:以太网 IC Gigabit Ethernet Transceiver with GMII/MII, Lead Free RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
| KSZ9021GN TR | 功能描述:以太网 IC Gigabit Ethernet Transceiver with GMII/MII RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray |
发布紧急采购，3分钟左右您将得到回复。