参数资料
型号: L4620
厂商: STMICROELECTRONICS
元件分类: 消费家电
英文描述: SPECIALTY CONSUMER CIRCUIT, PDIP8
封装: MINI, DIP-8
文件页数: 5/9页
文件大小: 185K
代理商: L4620
The L4620 liquid level alarm is designed to operate
with a variety of sensor types which change imped-
ance depending on whether the sensor is above or
below the level of a liquid. If the impedance variation
of ther liquid itself is sensed, a very simple sensor
(two electrodes) can be used. The output stage
drives directly the alarm indicator with a 300mA rec-
tangular wave signal, the duty cycle of which is pro-
grammable.
SENSOR INTERFACE.
As shown in the application circuit, the sensor is con-
nected so that it varies the attenuation of a square-
wave signal between pin 2 and pin 3 where its posi-
tive half cycle is compared with the reference thresh-
old (with hysteresis).
This frequency, generated internally by a 50% duty
cycle oscillator, is 50Hz in the typical application
(Rosc = 180K
Cosc = 4.7nF).
The threshold of the sensor input is a function of the
output voltage at pin 2. The hysteresis is provided by
a Schmitt trigger comparator. As shown in figure 1,
this gives hysteresis with either threshold polarity
selected.
The AC driving of the level sensor allows the use of
a capacitive filter (CA, CB, CC in block diagram)
which acts as a bandpass filter at the frequency
used. The resistor RC in the application circuit biases
the sensor input stage. In this way the interference
problems typical of automotive applications are re-
duced considerably. If, however, it is not necessary
to decouple and filter the sensor a simple resistive
network may be used, eliminating the capacitors.
SPURIOUS INDICATION PROTECTION.
To prevent spurious alarm signals when the liquid is
agitated or in the presence of interference, the de-
vice includes two protection mechanism :
Firstly, the sensor interface which samples the posi-
tive half cycle of the sensor signal activates its output
only if there are four consecutive alarm condition in-
dications. Secondly, the alarm output stage is only
activated after an externally programmable delay.
During this delay if the alarm condition ceases the
alarm output will not be activated.
Using the values Cosc = 4.7nF and Rosc = 180K
,
which give a typical oscillator frequency of 1.6KHz,
delays of about 10 s (programming pin 7 low) or 20s.
INTERNAL MEMORY.
When the alarm output has been activated an inter-
nal latch holds it in the active state until the power
supply is removed. This feature ensures that the
alarm will not be interrupted if the sensor connection
breaks.
OUTPUT STAGE.
Through pin 8 it is possible to program the duty cycle
of the alarm signal waveform (see figure 2). When
pin 8 is high the output signal has a duty cycle of 50%
; if pin 8 is low the duty cycle is 1 : 64. The period of
the output signal is always 320ms using the compo-
nent values indicated in block diagram.
The output stage can deliver up to 300mA and is pro-
tected internally against overvoltages (by a zener).
A thermal shutdown circuit provides additional pro-
tection.
CIRCUIT OPERATION
L4620
5/9
相关PDF资料
PDF描述
L48DB12001PSA DC-DC REG PWR SUPPLY MODULE
L4981BD 2 A POWER FACTOR CONTROLLER, 115 kHz SWITCHING FREQ-MAX, PDSO20
L4981B 2 A POWER FACTOR CONTROLLER, 115 kHz SWITCHING FREQ-MAX, PDIP20
L4981AD013TR 2 A POWER FACTOR CONTROLLER, 115 kHz SWITCHING FREQ-MAX, PDSO20
L5200-45-AH6-R SWITCHED CAPACITOR REGULATOR, 2000 kHz SWITCHING FREQ-MAX, PDSO6
相关代理商/技术参数
参数描述
L465 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:LINEAR INTEGRATED CIRCUITS
L-465 制造商:RHOMBUS-IND 制造商全称:Rhombus Industries Inc. 功能描述:TOROID INDUCTOR
L465A 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:LINEAR INTEGRATED CIRCUITS
L-466 制造商:RHOMBUS-IND 制造商全称:Rhombus Industries Inc. 功能描述:TOROID INDUCTOR
L-467 制造商:RHOMBUS-IND 制造商全称:Rhombus Industries Inc. 功能描述:LOW COST POWER INDUCTOR