- 您现在的位置：买卖IC网 > PDF目录43899 > L6208PD013TR (STMICROELECTRONICS) STEPPER MOTOR CONTROLLER, 5.6 A, PDSO36 PDF资料下载
参数资料
| 型号： | L6208PD013TR |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 运动控制电子 |
| 英文描述： | STEPPER MOTOR CONTROLLER, 5.6 A, PDSO36 |
| 封装： | ROHS COMPLIANT, POWER, SOP-36 |
| 文件页数： | 7/27页 |
| 文件大小： | 453K |
| 代理商： | L6208PD013TR |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
15/27
L6208
time. The drive mode is selected by the HALF/FULL input and the current state of the sequence generator as
described below. A rising edge of the CLOCK input advances the state machine to the next state. The direction
of rotation is set by the CW/CCW input. The RESET input resets the state machine to state.
HALF STEP MODE
A HIGH logic level on the HALF/FULL input selects Half Step Mode. Figure 16 shows the motor current wave-
forms and the state diagram for the Phase Sequencer Generator. At Start-Up or after a RESET the Phase Se-
quencer is at state 1. After each clock pulse the state changes following the sequence 1,2,3,4,5,6,7,8,… if CW/
CCW is high (Clockwise movement) or 1,8,7,6,5,4,3,2,… if CW/CCW is low (Counterclockwise movement).
NORMAL DRIVE MODE (Full-step two-phase-on)
A LOW level on the HALF/FULL input selects the Full Step mode. When the low level is applied when the state
machine is at an ODD numbered state the Normal Drive Mode is selected. Figure Fig. 17 shows the motor cur-
rent waveform state diagram for the state machine of the Phase Sequencer Generator. The Normal Drive Mode
can easily be selected by holding the HALF/FULL input low and applying a RESET. AT start -up or after a RE-
SET the State Machine is in state1. While the HALF/FULL input is kept low, state changes following the se-
quence 1,3,5,7,… if CW/CCW is high (Clockwise movement) or 1,7,5,3,… if CW/CCW is low (Counterclockwise
movement).
WAVE DRIVE MODE (Full-step one-phase-on)
A LOW level on the pin HALF/FULL input selects the Full Step mode. When the low level is applied when the
state machine is at an EVEN numbered state the Wave Drive Mode is selected. Figure 18 shows the motor cur-
rent waveform and the state diagram for the state machine of the Phase Sequence Generator. To enter the
Wave Drive Mode the state machine must be in an EVEN numbered state. The most direct method to select the
Wave Drive Mode is to first apply a RESET, then while keeping the HALF/FULL input high apply one pulse to
the clock input then take the HALF/FULL input low. This sequence first forces the state machine to sate 1. The
clock pulse, with the HALF/FULL input high advances the state machine from state 1 to either state 2 or 8 de-
pending on the CW/CCW input. Starting from this point, after each clock pulse (rising edge) will advance the
state machine following the sequence 2,4,6,8,… if CW/CCW is high (Clockwise movement) or 8,6,4,2,… if CW/
CCW is low (Counterclockwise movement).
Figure 16. Half Step Mode
Figure 17. Normal Drive Mode
3
2
4
5
1
D01IN1320
2345678
6
1
8
7
IOUTA
IOUTB
CLOCK
Start Up or Reset
2
4
1
D01IN1322
3571357
6
8
IOUTA
IOUTB
CLOCK
35
17
Start Up or Reset
相关PDF资料 |
PDF描述 |
|---|---|
| L6208D013TR | STEPPER MOTOR CONTROLLER, 5.6 A, PDSO24 |
| L6219R013TR | STEPPER MOTOR CONTROLLER, 1 A, PDSO24 |
| L6223 | STEPPER MOTOR CONTROLLER, 6 A, PDIP20 |
| L6225PDTR | BRUSHLESS DC MOTOR CONTROLLER, 2.8 A, PDSO20 |
| L6225PD | BRUSHLESS DC MOTOR CONTROLLER, 2.8 A, PDSO20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| L6208Q | 功能描述:马达/运动/点火控制器和驱动器 DMOS Driver Bipolar 5.6A 100kHz 8 to 52V RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| L6208QTR | 功能描述:马达/运动/点火控制器和驱动器 DMOS Dual Full Bridge Driver 5.6A RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| L620C | 制造商:Pass & Seymour/Legrand 功能描述:Connector, Turnlok 3 Wire Ground, IP20, 20A, 250V, Black Back, White Front Body 制造商:Pass & Seymour/Legrand 功能描述:CONNECTOR POWER ENTRY RECEPTACLE 20A 制造商:Pass & Seymour/Legrand 功能描述:CONNECTOR, POWER ENTRY, RECEPTACLE, 20A 制造商:Pass & Seymour/Legrand 功能描述:CONNECTOR, POWER ENTRY, RECEPTACLE, 20A; Connector Type:Power Entry; Series:Turnlok; Current Rating:20A; Connector Color:Black / White; Connector Body Material:Nylon (Polyamide); Voltage Rating VAC:125V; Connector Mounting:Cable 制造商:Hubbell Premise Wiring 功能描述:Conn Power PL 2Power/1Ground POS Solder ST Panel Mount 3 Terminal 1 Port 制造商:Hubbell Wiring Device-Kellems 功能描述:LKG CONN, 20A 250V, HUB PRO, L6-20R |
| L620FI | 制造商:Pass & Seymour/Legrand 功能描述:CONNECTOR POWER ENTRY PLUG 制造商:Pass & Seymour/Legrand 功能描述:CONNECTOR, POWER ENTRY, PLUG, 20A; Connector Type:Power Entry; Series:Turnlok; Current Rating:20A; Connector Color:Grey; Connector Body Material:PC (Polycarbonate); Voltage Rating VAC:125V; Connector Mounting:Flange; Gender:Plug |
| L6-20FO | 制造商:Pass & Seymour/Legrand 功能描述:Power Outlet 制造商:Pass & Seymour/Legrand 功能描述:CONNECTOR, AC POWER, PLUG, 20A, 250V; Connector Type:Electrical AC Power; Series:-; Current Rating:20A; Connector Color:Grey; Connector Body Material:Thermoplastic; Voltage Rating VAC:250V ;RoHS Compliant: NA |
发布紧急采购，3分钟左右您将得到回复。