参数资料
型号: L9230
厂商: STMICROELECTRONICS
元件分类: 运动控制电子
英文描述: STEPPER MOTOR CONTROLLER, PDSO20
封装: POWER, MO-166, SO-20
文件页数: 5/25页
文件大小: 218K
代理商: L9230
13/25
L9230
DIAGNOSTIC
The Diagnosis-Mode can be selected between SPI-Diagnosis and Status-Flag Diagnosis.
The choise of the Diagnosis-Mode is selected by the voltage-level on pin 12 (DMS Diagnosis Mode Selection).
DMS = GND
Status-Flag
DMS = Vcc
SPI-Diagnostic
For the connection of pins SI, SO, SS and SCK/SF see Fig. 10 respectively Fig. 11.
Status-Flag
The Status-Flag showes the condition tristate“.
At the following fault-cases the output-stages switches in tristate and set the status-flag from high to low.
- Short circuit of OUT1 or OUT2 against VS or GND
- Short circuit between OUT1 and OUT2
- Overcurrent
- Overtemperature
- Undervoltage on VS
In cause of short circuit or overcurrent, the fault will be stored.
The output stage switches in tristate and the status-flag is set from high level to low-level if the specified value
is exceeded.
If the voltage level changes from high to low on DI or from low to high on EN, the output stage switches on again
and the status-flag is reset to high-level.
In cause of overtemperature the fault will be stored.
The output stage switches in tristate and the status-flag is set from high level to low-level if the specified value
is exceeded.
the voltage level changes from high to low on DI or from low to high on EN, the output stage switches on again
and the status-flag is reset to high-level.
In cause of undervoltage on VBatt the output stage switches in tristate and the status-flag is set from high level
to low-level if the specified value is fallen. If the voltage has risen about the specified value again, the output
stage switches on again and the status-flag is reset to high-level.
The maximum current which can flow under normal operating conditions is limited to typical Imax. = 6,6A .
When the maximum current value is reached, the output stages are switched tristate for a fixed time.
According to the time-constant the current decreases exponentially until the next switch-on occurs.
At the end if the fixed time the output stage switches on again and the status-flag is reset to high-level.
相关PDF资料
PDF描述
LA5680T SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PQFP48
LA5681T SWITCHING CONTROLLER, 520 kHz SWITCHING FREQ-MAX, PQFP48
LA79500E 6-CHANNEL, VIDEO MULTIPLEXER, QFP80
LA79500E 6-CHANNEL, VIDEO MULTIPLEXER, QFP80
LB11610P BRUSHLESS DC MOTOR CONTROLLER, 1.5 A, PDSO36
相关代理商/技术参数
参数描述
L9230DIE1 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:SPI CONTROLLED H-BRIDGE
L9230-DIE1 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:SPI CONTROLLED H-BRIDGE
L-9294CGCK 制造商:Kingbright Corporation 功能描述:LED WIDE-VIEW 130? GREEN 制造商:Kingbright Corporation 功能描述:LED, WIDE-VIEW, 130, GREEN 制造商:Kingbright Corporation 功能描述:LED, GREEN, 150MCD, 570NM; LED Color:Green; Luminous Intensity:150mcd; Viewing Angle:130; Forward Current If:20mA; Forward Voltage:2.1V; LED Mounting:Through Hole; Lens Shape:Round; Wavelength Typ:570nm ;RoHS Compliant: Yes
L-9294QBC-D 制造商:Kingbright Corporation 功能描述:LED WIDE-VIEW 60? BLUE 制造商:Kingbright Corporation 功能描述:LED, WIDE-VIEW, 60, BLUE 制造商:Kingbright Corporation 功能描述:LED, BLUE, 500MCD, 470NM; LED Color:Blue; Luminous Intensity:500mcd; Viewing Angle:60; Forward Current If:20mA; Forward Voltage:3.3V; LED Mounting:Through Hole; Lens Shape:Round; Wavelength Typ:470nm ;RoHS Compliant: Yes
L-9294SEC-J3 制造商:Kingbright Corporation 功能描述: 制造商:Kingbright Corporation 功能描述:LED WIDE-VIEW 130? ORANGE 制造商:Kingbright Corporation 功能描述:LED, WIDE-VIEW, 130, ORANGE 制造商:Kingbright Corporation 功能描述:LED, RED, 1CD, 625NM, Bulb Size:T-1 3/4 (5mm), LED Color:Red, Luminous Intensity:1cd, Viewing Angle:130, Forward Current If:20mA, Forward Voltage:2.2V, LED Mounting:Through Hole, Lens Shape:Round, Wavelength Typ:625nm , RoHS Compliant: Yes