- 您现在的位置：买卖IC网 > PDF目录32287 > L9705D013TR (STMICROELECTRONICS) SPECIALTY ANALOG CIRCUIT, PDSO20 PDF资料下载
参数资料
| 型号： | L9705D013TR |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSO20 |
| 封装： | SO-20 |
| 文件页数： | 5/9页 |
| 文件大小： | 224K |
| 代理商： | L9705D013TR |
5/8
L9705
The L9705 circuit compares the input current with the current through the internal reference resistor. The
device is designed to work with an external input series resistor of RIN1-8 = 1K. With this input resistor
the contact current, when the contact is closed and the device activated (EN =LOW) is:
, for GND contacts, (1)
, fro VBAT contacts, (2)
For this calculation the limit value of the VS to VIN and VIN saturation voltage of 2V was considered so that
the lowest limit value of IIN is calculated in (1) and (2)
Figure 4. The output voltage as a function of the input resistance at the corresponding sense input.
The function of the circuit can be demonstrated with the transfer characteristics, showing the output status
as a function of the input resistor RI, shown in figure 4. The input resistor is a sum of the RIN and the con-
tact resistance RCON or RCOFF, for the closed contact:
RI = RIN + RCON, (3)
and for the open contact:
RI = RIN + RCOFF, (4)
The output goes HIGH when the input resistance increases above 5.3K
(GND contacts) or 6.5K
(VBAT contacts) and goes LOW, when the input resistance decreases below 4K (GND contacts) or
4.8K
(VBAT contacts); these values are typical values for the switching thresholds. The limit values of RI
= 1.8K
(GND contacts) and RI = 1.8K (VBAT contacts) for LOW and RI = 20K (GND contacts) and
29K
(VBAT contacts) for HIGH implies that a contact with RCON = 100 ( at IIN = 10mA) will be recognized
as ON = LOW and a contact with RCOFF = 19K (GND contacts) or 28K (VBAT contact) will be recognized
as OFF = HIGH.
These limits are valid within the supply voltage range 6V
≤ VS ≤ 16V, the ground potential difference of
VGND = 0.1VS, the battery voltage potential difference of VBAT < 0.1VBAT and the variation of the re-
verse battery protection diode D1 voltage from 0.5V to 1V.
The internal clamping diodes at the contact monitoring inputs together with the external contacts series
resistors RIN allows to withstand the transients at the contact connection.The contact series resistor RIN
limits the input current at the transient.
The dynamic behaviour of the circuit is defined with the times tdo and tdTS. When the contact is open, the
input capacitor CIN must be charged through the resistor RIN. In this case the total delay time tdo may be
influenced also with the time constant RINCIN.
The delay time tdTS, when disabling the device, is defined only with the internal circuitry. In both cases,
output external capacitance less than 50pF is assumed, the internal output capacitance of the tristate buff-
ers are less than 5pF.
I
IN
V
S
2V
–
1k
---------------------
=
I
IN
V
BAT
V
BAT
2V
–
+
1k
----------------------------------------------------
=
相关PDF资料 |
PDF描述 |
|---|---|
| L9953LXPTR | SPECIALTY CONSUMER CIRCUIT, PDSO36 |
| L9953LXP | SPECIALTY CONSUMER CIRCUIT, PDSO36 |
| LA1177 | 1-BAND, AUDIO TUNER, PSIP9 |
| LA1178M | 1-BAND, AUDIO TUNER, PDSO10 |
| LA1186N | 1-BAND, AUDIO TUNER, PSIP9 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| L9708 | 功能描述:低压差稳压器 - LDO Quad Squib Driver PTS SmartPower RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| L970813TR | 功能描述:低压差稳压器 - LDO Quad Squib Driver PTS SmartPower RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| L9709 | 功能描述:低压差稳压器 - LDO Quad Squib Driver PTS SmartPower RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| L9709TR | 功能描述:低压差稳压器 - LDO Quad Squib Driver PTS SmartPower RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| L971 | 制造商:Thomas & Betts 功能描述:NON-INSUL RING 4/0 AWG W/ 1/4 STUD |
发布紧急采购，3分钟左右您将得到回复。