- 您现在的位置：买卖IC网 > PDF目录30719 > LA4820M 0.12 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO24 PDF资料下载
参数资料
| 型号： | LA4820M |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 0.12 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO24 |
| 封装： | MFP-24 |
| 文件页数： | 5/21页 |
| 文件大小： | 637K |
| 代理商： | LA4820M |
c C8 (0.33 F to 0.1 F):
Coupling capacitor for PVSS detection input and HzP power output.
Not needed when PVSS is not used.
c C9 (0.1 F to 0.01 F):
Capacitor for SP/HzP switching smoothing (charging/discharging).
c C10 (0.47 F to 2.2 F):
Capacitor for blocking common amplifier oscillation.
Polyester film or ceramic capacitor (of which capacitance specified must be independent of
temperature changes) is recommended. Not needed when common amplifier is turned off.
c C11 (22 F to 47 F):
Ripple filter output capacitor. Also functions as oscillation blocking capacitor.
c C12 (220 F to 10 F):
Power supply capacitor.
* Use of a Tantalum capacitor is recommended for C11 and C12, because electrolytic
capacitors cause the high-region impedance to increase at low temperatures.
Description of Each System
1. Ripple filter
c Used when the ripple level on the power line is high and a high ripple rejection ratio is needed in the amplifier block. When not
needed, pins 1, 23 and 24 must be left open. (Refer to Sample Application Circuit 2.)
c When using a ripple filter, the output Tr VCE voltage and the pin 1 C1 capacitance (LPF capacitor for the reference bias) must
be adjusted according to the power supply ripple level.
Power supply
The VCE voltage must be adjusted to be ripple bottom peak voltage +0.1 V or more.
2. MONO amplifier block
c Adds the channel 1 and channel 2 inputs and outputs the addition in single-channel BTL operation.
c Non-clipping and output limiter circuits are built in as output control functions.
1)
The output limiter detects the output level from the pin 20 detection input and controls the output level by means of ALC
configuration. Adjust the level according to the speaker impedance, the power dissipation capability of the power supply, etc.
If not needed, the pin 20 detection input must be left open.
2)
The non-clipping circuit prevents large input-caused output clipping (degradation in sound quality). The detection input is
connected internally, while the output level depends on the VCC2 voltage and is controlled by means of ALC configuration.
3. HzP amplifier block
c Pin 11 (PWRC CONT) can be used to create a common amplifierless configuration. (This configuration is recommended when
there is a possibility that the jack common pin may be shorted with GND in an application set.)
c The output control function PVSS (Peak Volume Select System) controls the output level by means of ALC configuration
(keeping user-friendly volume level, etc.); the level can be varied by an external resistor.
Descriptional of Each Block Switching
1. Power mute switch
c When an application set is microcomputer controlled, the power supply must be turned on/off with mute turned on in order to
prevent shock noise. Even if an application set is not microcomputer controlled, the mute-on time for power-on can be set by
the capacitance of the external capacitor on pin 2.
Mute-on time
6
Capacitance
× 0.75 V
1.5 A
Mute-on condition
VS
2 % 0.1 V
Mute time
Pin 2 charging
LA4820M
No.5205-13/21
相关PDF资料 |
PDF描述 |
|---|---|
| LA4901 | 10 W, 1 CHANNEL, AUDIO AMPLIFIER, DIP28 |
| LA4902 | 10 W, 1 CHANNEL, AUDIO AMPLIFIER, DIP28 |
| LA49032H | 3 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO36 |
| LA4905 | 25 W, 2 CHANNEL, AUDIO AMPLIFIER, ZFM23 |
| LA4906 | 25 W, 2 CHANNEL, AUDIO AMPLIFIER, ZFM23 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LA4905 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:17-W, 2-Channel BTL AF High-Efficiency Power Amplifier for Car Stereo Systems |
| LA4906 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:17-W, 2-Channel BTL AF High-Efficiency Power Amplifier for Car Audio Systems |
| LA4917H | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monolithic Linear IC Audio Output for TV application High-Effciency Two-Channel 7W BTL Power Amplifier ICs |
| LA4919N | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monolithic Linear IC Two-Channel 10W BTL High-Efficiency TV Audio Output Power Amplifier |
| LA4B-M1C2LV-G | 制造商:IDEC CORPORATION 功能描述:Switch Push Button N.O./N.C. DPDT Flush Rectangular Button 0.1A 250VAC 250VDC Momentary Contact PC Pins Panel Mount/Through Hole |
发布紧急采购，3分钟左右您将得到回复。