参数资料
型号: LA49101H
元件分类: 音频/视频放大
英文描述: 10 W, 1 CHANNEL, AUDIO AMPLIFIER, PDSO28
封装: HSOP-28
文件页数: 8/11页
文件大小: 203K
代理商: LA49101H
LA49101H
No. A1049-6/11
Description of external parts
C1
HP input capacitor of 1μF is recommended.
C2
Ripple filter capacitor of 47μF is recommended.
C3
HP output capacitor of 220μF is recommended.
C4, R1
Oscillation preventive capacitors. Polyester film capacitor (Mylar capacitor) superior in temperature
characteristics is recommended. These are also used together with R1.
C5
Input capacitors. 2.2μF is recommended. 3.3μF or less is used because variation may cause pop sound.
C6
Input reference amplifier capacitor. The value same as for C5 is recommended.
C7
Amplifier on-time setting capacitor. 22μF is recommended. (The on-time period in this case is about
0.7sec.)
The rise time may be shortened by lowering the capacitance value. As this may cause pop sound, however,
10
μF or more is recommended.
C8
The amplifier ripple filter capacitor of 47μF is recommended.
C9
Switching regulator oscillation preventive capacitor. 1000pF is recommended.
C10, R2
Smoothing capacitors for switching regulator output. LA49101H uses the self-excitation oscillation
switching regulator. Because of effects on the self-excitation stability, the capacitor with the low
equivalent series resistance (about 3
Ω or less) at high frequency and satisfactory temperature
characteristic is recommended.
Use also R2 2.2
Ω from the same reason.
C11
Power capacitor
C12, 13
Oscillation preventive capacitors. Polyester film capacitor (Mylar capacitor) superior in temperature
R3, 4
characteristics is recommended. These are also used together with R3 and R4.
TR1, *RB External switching transistor. As the collector current of a peak value of about 10A flows, the transistor of
fT=30 to 50MHz is recommended to meet the current capacity. When the transistor with fT=100MHz or
more is used, add base resistance of about *RB 10Ω to prevent oscillation because it may induce
oscillation in the switching waveform.
L1
The coil inductance range of 150μH to 220μH is recommended.
D1
Flywheel diode to draw the energy from coil. A Schottky barrier diode with small VF is recommended.
Switching Regulator Pin15 to Pin17
LA49101H has the signal tracing self-excitation switching regulator to reduce the power dissipation.
The self-excitation frequency at no signal is about 210kHz to 260kHz.
TR1 is an external switching transistor.
IC=2.5A, fT=30MHz to 50MHz are recommended.
When using the transistor with fT=100MHz or more, oscillation
may be induced in the switching waveform. Add the base
resistance (about RB10Ω) to prevent such oscillation.
C10 is the smoothing capacitor for switching regulator output.
Because of effects on the self-excitation stability and regulator
efficiency, the capacitor with the low equivalent series resistance
and satisfactory temperature characteristic is recommended.
The recommended value is 22
μF. Use also R2 2.2Ω from the
same reason.
D1 is a flywheel diode to scoop energy of the coil.
The Schottky barrier diode with small VF is recommended.
SW OUT
SW E
SW B
*RB
10
Ω
17
16
15
L1
180
μH
TR1
Switching
Transistor
IC=2.5A
fT=30MHz to 50MHz
C10
2.2uF
/25V
R2
2.2
Ω
D1
Flywheel
Diode
相关PDF资料
PDF描述
LA4915 5 W, 2 CHANNEL, AUDIO AMPLIFIER, PDIP28
LA4917H 7 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO28
LA4919N 10 W, 2 CHANNEL, AUDIO AMPLIFIER, PDFM28
LA5677M 0.021 A SWITCHING CONTROLLER, 500 kHz SWITCHING FREQ-MAX, PDSO16
LA5679T 0.03 A SWITCHING CONTROLLER, 320 kHz SWITCHING FREQ-MAX, PDSO36
相关代理商/技术参数
参数描述
LA4917H 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monolithic Linear IC Audio Output for TV application High-Effciency Two-Channel 7W BTL Power Amplifier ICs
LA4919N 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monolithic Linear IC Two-Channel 10W BTL High-Efficiency TV Audio Output Power Amplifier
LA4B-M1C2LV-G 制造商:IDEC CORPORATION 功能描述:Switch Push Button N.O./N.C. DPDT Flush Rectangular Button 0.1A 250VAC 250VDC Momentary Contact PC Pins Panel Mount/Through Hole
LA4B-M1C2LV-W 制造商:IDEC CORPORATION 功能描述:Switch Push Button N.O./N.C. DPDT Flush Rectangular Button 0.1A 250VAC 250VDC Momentary Contact PC Pins Panel Mount/Through Hole
LA4CA00 制造商:TE Connectivity 功能描述: