Ordering number : ENN6520
83000RM (OT) No. 6520-1/5
Overview
The LA5645T is a constant-voltage/constant-current
control IC that incorporates low-voltage operational
amplifiers and a high-precision reference voltage circuit
(VREF = 1.5 V ±1.0%). This device is optimal for use as a
secondary side controller in battery chargers, switching
regulators, and similar products.
Features
Operating supply voltage: 2.5 to 14 V
High-precision reference voltage: 1.5 V ±1.0%
PC pin current: 60 mA (max)
Current drain: 3 mA (max)
Input offset voltage: 2 mV (max)
Package Dimensions
unit: mm
3245-MSOP8
4.9
3.0
0.65
3.0
(0.5)
(0.85)
0.5
0.25
14
85
0.25
0.08
1.1max
SANYO: MSOP8
[LA5645T]
LA5645T
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Constant-Voltage/Constant-Current Control IC
Monolithic Linear IC
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
VCC max
14.5
V
Differential input voltage
VID max
14.5
V
Allowable power dissipation
Pd max
Independent IC
200
mW
Mounted on the specified printed circuit board*
370
mW
PC pin current
IPC max
60
mA
Operating temperature
Topr
–40 to +85
°C
Storage temperature
Tstg
–50 to +150
°C
Note: * Specified printed circuit board: 20
× 10 × 0.8 mm3, paper phenolic board.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Recommended supply voltage
Vopr
2.5 to 14
V
Operating Conditions at Ta = 25°C