- 您现在的位置：买卖IC网 > PDF目录95590 > LA6588M BRUSHLESS DC MOTOR CONTROLLER, 0.8 A, PDSO10 PDF资料下载
参数资料
| 型号： | LA6588M |
| 元件分类： | 运动控制电子 |
| 英文描述： | BRUSHLESS DC MOTOR CONTROLLER, 0.8 A, PDSO10 |
| 封装： | 0.225 INCH, MFP-10 |
| 文件页数： | 5/5页 |
| 文件大小： | 107K |
| 代理商： | LA6588M |
LA6588M
PS No.A0505-5/5
*1: When Di to prevent breakdown in case of reverse connection is used, it is necessary to insert a capacitor Cr to secure
the regenerative current route. Similarly, Cr is necessary to enhance the reliability when there is no capacitor near the
fan power line.
*2: When taking Hall bias from VCC, carry out bias to VCC with resistor R1 as shown in the figure. Linear drive is
achieved through voltage control of the coil by amplifying the Hall output. With large Hall element output, the start
performance and efficiency are improved. Noise can be reduced further by adjusting the Hall element.
*3: When the Hall bias is taken from the HB pin, constant-voltage bias is made with about 1.5V. Therefore, the Hall
element can provide the output satisfactory in temperature characteristics.
*4: Keep this open when not using.
*5: When the wiring from the Hall output to IC Hall input is long, noise may be carried through the wiring.
In this case, insert the capacitor as shown in the figure.
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data, services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
of otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of August, 2006. Specifications and information herein are subject
to change without notice.
相关PDF资料 |
PDF描述 |
|---|---|
| LA6595T | BRUSH DC MOTOR CONTROLLER, 0.5 A, PDSO8 |
| LA6595T | BRUSH DC MOTOR CONTROLLER, 0.5 A, PDSO8 |
| LA7016 | 2-CHANNEL, AUDIO/VIDEO SWITCH, SIP8 |
| LA7152 | 3-CHANNEL, AUDIO/VIDEO SWITCH, SIP9 |
| LA7155M | QUAD 1-CHANNEL, AUDIO/VIDEO SWITCH, PDSO24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LA6588MC | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monolithic Linear IC 24V power supply, BTL output linear drive Single-phase Fan Motor IC |
| LA6588MC-AH | 功能描述:马达/运动/点火控制器和驱动器 FAN MOTOR DRIVER RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LA6588MC-BH | 功能描述:马达/运动/点火控制器和驱动器 RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LA6588M-TE-L-H | 功能描述:马达/运动/点火控制器和驱动器 SINGLE PHASE MOTOR DRIVER RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| LA6595T | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:BTL Drive Single-Phase Full-Wave Fan Motor Driver |
发布紧急采购，3分钟左右您将得到回复。