参数资料
型号: LB1648
元件分类: 运动控制电子
英文描述: BRUSH DC MOTOR CONTROLLER, 0.8 A, PDIP12
封装: DIP-12
文件页数: 5/7页
文件大小: 321K
代理商: LB1648
No.3221-5/7
LB1648
Design Notes
1 : Maximum voltage, maximum current
A voltage greater than the supply voltage, 7 to 16V, specified in the Allowable Operating Conditions must not be
applied to pins 1 and 7. The maximum current is 0.8A (peak). The rush
current at the time of start must not exceed the peak current.
2 : Output transistor protection
A resistor (or for fuse resistor) must be connected to the
VCC line to provide protection against output short,
output pin-to-GND short.
3 : Wiring
The bypass capacitors connected across pins 1, 7 and GND must not have an impedance common to other lines,
The GND line must be separated from other circuits.
4 : Provision against oscillation
In applications where motors with brush are used, a capacitor may be connectd across both terminals to prevent
the spark-caused noise. This capacitor is connected across the output pins of the LB1648, which may cause
oscillation to occur. In this case, the capacitor value must be made as small as possible or a resistor must be
connected in series.
5 : External Zener diode
The current flowing out of the VZ pin varies with the load and its
maximum value is approximately 1.2mA.
If you use a Zener diode of soft clip type and need an accuracy in voltage, a
current required for the Zener diode must be supplied externally.
相关PDF资料
PDF描述
LB1669M BRUSHLESS DC MOTOR CONTROLLER, 1.5 A, PDSO10
LB1817W DISK DRIVE MOTOR CONTROLLER, 1.5 A, PQFP48
LB1843V BRUSH DC MOTOR CONTROLLER, 0.8 A, PDSO20
LB1960M BRUSHLESS DC MOTOR CONTROLLER, 1 A, PDSO8
LB1960M BRUSHLESS DC MOTOR CONTROLLER, 1 A, PDSO8
相关代理商/技术参数
参数描述
LB1649 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Dual Bidirectional Motor Driver
LB165.450S 功能描述:WHIP SM 1/4 RoHS:是 类别:RF/IF 和 RFID >> RF配件 系列:* 标准包装:1 系列:*
LB1650 制造商:Panasonic Industrial Company 功能描述:IC
LB1651 制造商:Panasonic Industrial Company 功能描述:IC
LB1651D 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Dual Bidirectional Motor Driver