参数资料
型号: LB1813MS
元件分类: 运动控制电子
英文描述: DISK DRIVE MOTOR CONTROLLER, PDSO36
封装: 0.375 INCH, MFP-36
文件页数: 8/8页
文件大小: 115K
代理商: LB1813MS
LB1813MS
PS No.A0868-8/8
DT1
DT2
R6
R7
C
VID=5V
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
t300
CR6 R7
R6 + R7
0.405 + ln
R6 - R7
R6 - 2R7
t360
CR6 R7
R6 + R7
0.522 + ln
0.781R6 - R7
R6 - 2R7
When SL1=high level
T300
≈ 0.693CR6
When SL1=low level
T360
≈ 0.577CR6
Using only the ID pulse involves shorting DT1 and DT2.
This catalog provides information as of June, 2007. Specifications and information herein are subject
to change without notice.
相关PDF资料
PDF描述
LB1820 BRUSHLESS DC MOTOR CONTROLLER, 2.5 A, PDIP28
LB1831M BRUSH DC MOTOR CONTROLLER, PDSO16
LB1838JM STEPPER MOTOR CONTROLLER, PDSO14
LB1838JM STEPPER MOTOR CONTROLLER, PDSO14
LB1840M STEPPER MOTOR CONTROLLER, 0.25 A, PDSO14
相关代理商/技术参数
参数描述
LB1814M 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:LB1814M
LB1816 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:LB1816
LB1817M 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:FDD Spindle Motor Driver
LB1817W 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC Motor Controller/Driver
LB1820 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Office Automation-Use 3-Phase Brushless Motor Driver