- 您现在的位置：买卖IC网 > PDF目录16492 > LB2012T150K (Taiyo Yuden)INDUCTOR WOUND 15UH 100MA 0805 PDF资料下载
参数资料
| 型号： | LB2012T150K |
| 厂商： | Taiyo Yuden |
| 文件页数： | 14/14页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR WOUND 15UH 100MA 0805 |
| 产品目录绘图： | LB(C,R)2012 Series Side LB(C,R)2012 Series Top |
| 标准包装： | 1 |
| 系列： | LB |
| 电感： | 15µH |
| 电流： | 100mA |
| 容差： | ±10% |
| 屏蔽： | 无屏蔽 |
| DC 电阻(DCR)： | 最大 1.69 欧姆 |
| 频率 - 自谐振： | 28MHz |
| 封装/外壳： | 0805（2012 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 工作温度： | -25°C ~ 105°C |
| 频率 - 测试： | 2.52MHz |
| 产品目录页面： | 1825 (CN2011-ZH PDF) |
| 其它名称： | 587-2449-6 |
6．Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Breakaway PC boards（ splitting along perforations）
Precautions
Technical
considerations
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Breakaway PC boards（ splitting along perforations）
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
7．Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
Precautions
Technical
considerations
? Recommended conditions
Ambient temperature：0～40℃ / Humidity：Below 70% RH
The ambient temperature must be kept below 30℃ even under ideal storage conditions, solderability of products electrodes may
decrease as time passes. For this reason,
LB type：Should be used within 6 months from the time of delivery.
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_wound_CB_LB_prec_e-E02R01
相关PDF资料 |
PDF描述 |
|---|---|
| M3DDK-1618R | IDC CABLE - MKR16K/MC16M/MKR16K |
| HCC06DREI-S734 | CONN EDGECARD 12POS .100 EYELET |
| UPM2C4R7MPD1TD | CAP ALUM 4.7UF 160V 20% RADIAL |
| XR16V564DIV-0A-EB | EVAL BOARD FOR XR16V564D 64LQFP |
| M3BBK-1618R | IDC CABLE - MSR16K/MC16M/MSR16K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LB2012T150M | 制造商:TAIYO YUDEN 功能描述:15uH }20% 100mA 2.0~1.25~1.25mm Cut Tape 制造商:Taiyo Yuden 功能描述:Ind Chip Wirewound 15uH 20% 2.52MHz Ferrite 100mA 0805 T/R |
| LB2012T1R0M | 功能描述:固定电感器 INDCTR STD WND 0805 1.0uH 20% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| LB-2012-T1R0MK | 功能描述:固定电感器 1uH 20% Wound Chip RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| LB2012T1R0MV | 功能描述:1μH Unshielded Wirewound Inductor 405mA 150 mOhm 0805 (2012 Metric) 制造商:taiyo yuden 系列:LB 包装:剪切带（CT） 零件状态:有效 类型:绕线 材料 - 磁芯:铁氧体 电感:1μH 容差:±20% 额定电流:405mA 电流 - 饱和值:- 屏蔽:无屏蔽 DC 电阻（DCR）:150 毫欧 不同频率时的 Q 值:- 频率 - 自谐振:100MHz 等级:AEC-Q200 工作温度:-40°C ~ 105°C 频率 - 测试:7.96MHz 安装类型:表面贴装 封装/外壳:0805（2012 公制） 大小/尺寸:0.079" 长 x 0.049" 宽（2.00mm x 1.25mm） 高度 - 安装（最大值）:0.057"（1.45mm） 标准包装:1 |
| LB2012T220 | 制造商:TAIYO-YUDEN 制造商全称:Taiyo Yuden (U.S.A.), Inc 功能描述:WOUND CHIP INDUCTORS |
发布紧急采购，3分钟左右您将得到回复。