参数资料
型号: LC75374E
厂商: SANYO SEMICONDUCTOR CO LTD
元件分类: 音频控制
英文描述: 2 CHANNEL(S), TONE CONTROL CIRCUIT, PQFP44
封装: QIP-44
文件页数: 1/5页
文件大小: 379K
代理商: LC75374E
Ordering number : EN5835
N3098RM (OT) No. 5835-1/17
Overview
The LC75374E is an electronic volume and tone control
circuit that provides volume, balance, fader, bass and
treble, super bass, input switching, and input and output
level controls and requires a minimal number of external
components to implement these functions.
Functions
Volume: 0dB to –79dB (in 1-dB steps) and –
∞dB for a
total of 81 positions.
A balance function can be implemented by
controlling the left and right channels
independently.
Fader: Allows either the rear or the front channel outputs
to be attenuated over 16 positions.
(0 to –20dB in 2dB steps, –20 to –25dB in a 5dB
step, –25 to –45dB in 10dB steps, –60dB, and
∞dB for a total of 16 positions.)
Bass and treble: NF-type tone control circuits are form–
ed using external CR circuits. The bass
and treble can be controlled from 0dB
to +11.9dB (in 1.7dB steps) for a total
of 15 positions.
Input gain: The input signal can be amplified by 0dB to
+18.75dB (in 1.25dB steps).
Output gain: The fader output can be set to one of three
settings: 0dB, +6.5dB, or +8.5dB.
Input switching: Both the left and right channels can be
selected from one of four inputs.
Super bass: This circuit provides peaking characteristics
(T type characteristics) and 11 position sett–
ings.
Features
On-chip buffer amplifiers minimizes the number of
external components.
Built-in reference voltage generator for the analog
ground.
All controls can be set using the serial data input circuit
(CCB).
Package Dimensions
unit: mm
3148-QIP44MA
SANYO: QIP44MA
[LC75374E]
LC75374E
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Electronic Volume and Tone Control for Car Stereos
CMOS IC
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
CCB is a trademark of SANYO ELECTRIC CO., LTD.
CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
相关PDF资料
PDF描述
LC7537N 2 CHANNEL(S), TONE CONTROL CIRCUIT, PDIP42
LC7537AN 2 CHANNEL(S), TONE CONTROL CIRCUIT, PQFP48
LC7537NE 2 CHANNEL(S), TONE CONTROL CIRCUIT, PQFP48
LC75382E 2 CHANNEL(S), TONE CONTROL CIRCUIT, PQFP48
LC75383E 2 CHANNEL(S), TONE CONTROL CIRCUIT, PQFP64
相关代理商/技术参数
参数描述
LC7537AN 制造商:Panasonic Industrial Company 功能描述:IC
LC7537N 制造商:Panasonic Industrial Company 功能描述:IC
LC7537NE 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Electronic Volume Control System for Audio Equipment
LC7538 制造商:未知厂家 制造商全称:未知厂家 功能描述:
LC75382E 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Electronic Tone Controls for Car Stereo Systems