- 您现在的位置：买卖IC网 > PDF目录39191 > LC78684E SPECIALTY CONSUMER CIRCUIT, PQFP80 PDF资料下载
参数资料
| 型号： | LC78684E |
| 元件分类： | 消费家电 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PQFP80 |
| 封装： | 14 X 14 MM, QFP-80 |
| 文件页数： | 13/21页 |
| 文件大小： | 152K |
| 代理商： | LC78684E |
LC78684E
No.7350-20/21
Application Design Notes
While it goes without saying that strictly observing the absolute maximum ratings and allowable operating ranges
(recommended operation conditions) stipulated for this IC is necessary to achieve reliability of the overall system, it is also
necessary to take adequate care with respect to the mounting conditions and the operating environment, including the ambient
temperature and the possibility of electrostatic discharges (ESD). This section presents notes on aspects of design and mounting
that require special attention.
Handling Unused Pins
If this IC is operated with unused input pins left open, certain internal circuit operations may become unstable. Unused pins that
are mentioned in the IC documentation must be handled as specified. Also, do not allow output pins to come in contact with any
circuit lines, including power supply lines, ground lines, or other outputs.
Latchup Prevention
The voltages stipulated in the IC specifications must be provided to the corresponding power supply pins. When the same
voltage is stipulated for multiple pins, those pins all must be connected to the same potential.
Do not set I/O voltage levels to be either higher than the peripheral 3 V system block voltage, or lower than the ground level.
This relationship must also be maintained during the power-on sequence.
Do not apply overvoltages or abnormal noise to this IC.
While in general, latchup is prevented by holding unused input pins at either the VDD or VSS potential, input pins to this IC
must be handled as described in the pin descriptions.
Do not short the outputs.
Interface
Incorrect operation may result when different devices are connected if the input VIL/VIH and the output VOH and VOH levels
do not match. Level shifters must be inserted between devices with differing supply voltages, such as those often used in dual
power supply systems, to prevent destruction of the devices.
Load Capacitance and Output Current
If a large load capacitance is connected, the resulting effective short of the outputs may continue for an extended period and
lead to fusing of lines. Also, larger charge and discharge currents can cause noise, degrade device performance, and cause
incorrect operation. The recommended load capacitance ratings must be observed.
Excessive output sink or source currents can lead to the same problems described in the preceding item. Once the allowable
power dissipation rating has been met, the recommended current values must be observed as well.
Notes on Power Application and Reset
There are several aspects that require care when power is first applied, during a reset, and when the reset state is cleared. Refer
to the device specifications and design applications to match the product specifications.
In this IC, the register contents, pin output states, and pin I/O settings are not guaranteed after power is first applied. Items that
are defined by the reset operation or mode setting operations are guaranteed after these operations are performed. After power
is first applied to this IC, the application must first perform a reset operation. Pin states and register values that are not defined
are subject to change, both due to sample-to-sample variations in the product over the long term, and due to changes in device
design from the initial design states.
Thermal Design
Semiconductor device failure rates are greatly accelerated by inappropriate ambient temperature and power consumption
conditions. To assure the highest possible reliability, the thermal design should provide ample margins considering all possible
changes in the ambient conditions.
相关PDF资料 |
PDF描述 |
|---|---|
| LC78684NE | SPECIALTY CONSUMER CIRCUIT, PQFP80 |
| LC78815M | SERIAL INPUT LOADING, 16-BIT DAC, PDSO20 |
| LC78816MB | SERIAL INPUT LOADING, 16-BIT DAC, PDSO20 |
| LC78816MC | SERIAL INPUT LOADING, 16-BIT DAC, PDSO20 |
| LC78817M | SERIAL INPUT LOADING, 16-BIT DAC, PDSO10 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LC7868E | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Digital Signal Processor for Compact Disc Players |
| LC7868KE | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Digital Signal Processor for Compact Disc Players |
| LC786922E-6A01-E | 制造商:ON Semiconductor 功能描述:CD-DSP - Trays |
| LC786923W-02ST-LR-E | 制造商:ON Semiconductor 功能描述: |
| LC786924T-H | 制造商:ON Semiconductor 功能描述:CD-DSP - Trays |
发布紧急采购，3分钟左右您将得到回复。