- 您现在的位置：买卖IC网 > PDF目录32288 > LC9947G SPECIALTY CONSUMER CIRCUIT, PDFM20 PDF资料下载
参数资料
| 型号： | LC9947G |
| 元件分类： | 消费家电 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PDFM20 |
| 封装： | PLASTIC, DIP-20 |
| 文件页数： | 6/9页 |
| 文件大小： | 101K |
| 代理商： | LC9947G |
Test Methods
The following tests are performed with the CCD device to be measured mounted on the Sanyo evaluation board.
1. Sensitivity
Set up a CCV31F pattern box (Dai Nippon Printing Co., Ltd., intensity: 1320 NT, color temperature: 3100°K) with
no pattern, and take an image with C-500 a 1 mm thickness infrared blocking filter mounted in front of a Fujinon
HF16A lens. Set the lens aperture to f11, and set the separation between the lens and the pattern box to be 50 cm.
Measure the CCD output signal from the center of the image in this state.
2. Video signal non-uniformity
Test this item under the following conditions.
Standard drive state (See the specifications document.)
Use a halogen lamp with a color temperature of 3200°K as the light source.
Use an infrared blocking filter (C-500, 1 mm thickness).
Set the CCD surface illumination level to be 7 lux, and divide the screen into 45 blocks as shown in Figure 3.
Measure the average value in each block and determine the maximum, minimum, and mean of those values.
Determine the ratio of the difference between the maximum and minimum of the block averages to the mean of the
block averages.
VF =
Fig. 3
3. Saturated signal level
In the test method 1 setup state, remove the lens to saturate the output signal. Measure the CCD output signal from
the center of the image at this time.
4. Smear
Place a 1/10 V chart in front of a halogen light source as described below and take the image.
Adjust the image (input) light intensity using ND filters so that the output signal at point A, i.e., the CCD output,
becomes 250 mV.
Remove the ND filter and measure the output value for the first line (at point B) in the CCD output signal.
Fig. 4
(block average maximum) – (block average minimum)
(block average mean)
No. 4971-6/9
LC9947G
SM =
× 100 (%)
VB:
The amount of smear (mV) at point B
TND: Transmittance of the ND filter
VB
× TND
250
Point B
Point
A
相关PDF资料 |
PDF描述 |
|---|---|
| LDO06C-005W05-VXJ | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| LDO06C-005W05-HXJ | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| LED15-24S3P3W-A | 1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE |
| LED15-48S3P3W-A | 1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE |
| LED15-24S12W-A | 1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LC9948G | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:1/5 Optical Size CCIR B/W Solid-State Image Sensor |
| LC9949G | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:1/6 Optical Size EIA B/W Solid-State Image Sensor |
| LC99501-RB5 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Video Camera Circuit |
| LC9965 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
| LC9967 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
发布紧急采购，3分钟左右您将得到回复。