- 您现在的位置：买卖IC网 > PDF目录19192 > LF-TC-01 (Hirose Electric Co Ltd)TOOL HAND CABLE CLAMP CRIMP PDF资料下载
参数资料
| 型号： | LF-TC-01 |
| 厂商： | Hirose Electric Co Ltd |
| 文件页数： | 11/16页 |
| 文件大小： | 0K |
| 描述： | TOOL HAND CABLE CLAMP CRIMP |
| 产品培训模块： | HRS Waterproof Connector LF Waterproof Metal Circular Connector |
| 标准包装： | 1 |
| 系列： | LF20 |
| 工具类型： | 手动压接器，线缆 |
| 适用于相关产品： | 7.3mm ~ 8.7mm 直径线缆 |
| 特点： | 侧面插入，棘齿 |
| 产品目录页面： | 413 (CN2011-ZH PDF) |
| 其它名称： | *LF-TC-01 H9910 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the Series Miniature Waterproof Shielded Connectors
information.
No.
Illustration
Operation
5
1
Solder termination fixture
Body / insulator assembly
Crimping of the Shielding Clamp
1
After completion of the soldering operations
carefully remove (holding on the locking collar)
the body/insulator assembly from the solder
termination fixture.
Note
Soldered joints
Exercise caution not to damage or deform the
solder joints.
2
Wires
Cable outer jacket
Copper tape
Cable outer jacket
2
Wrap the folded over shielding mesh with 5 to
6 mm wide copper tape to assure that it will
not become loose.
Apply the copper tape so that the shielding
mesh does not protrude from under it.
Shielding mesh
Copper tape
5 to 6mm
Note
After wrapping the copper tape, the tape
should overlap itself by 2 mm max.
3
3
Insert the “U” shaped shielding clamp over the
Ground clamp
Copper tape
Cable outer jacket
1±0.5mm
Copper tape
Cable outer jacket
copper tape as shown on the illustration.
It is critical that the overlap of the copper tape
is located inside the shielding clamp as shown
on the illustration.
Note
When the end of the copper tape wrapping is
positioned at the open side of the ground
4
Wires
Shielding mesh
Overlap of the copper tape
E
Shielding clamp
Commercially
available pliers
4
fitting, the end portion of the copper tape
wrapping will no longer be covered by the
ground fitting when the ground fitting is
crimped.
Using commercially available pliers bend the
open ends of the shielding clamp as illustrated,
assuring that it stays in place. The dimension
of E. between opposing edges of the shielding
clamp is necessary to assure correct final
crimp.
Table 5
Shell size
E
Shielding clamp
Overlap of the copper tape
LF07
LF10
LF13
5mm max.
7mm max.
11
相关PDF资料 |
PDF描述 |
|---|---|
| 206-121ST | SPDT DIP SWITCH SEALED 1 POS |
| TC-QR/P1-PC2A | HANDTOOL CRIMPER QR/P1-PC2A-111 |
| TC-QR/P1-SC2A | HANDTOOL CRIMPER QR/P1-SC2A-111 |
| 219-8LPSTR | SWITCH DIP TAPE SEALED 8POS SMD |
| DF3-TA2428HC | TOOL CRIMP HAND 24-28AWG SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LFTC10N19C2450BCA108 | 制造商:Murata Manufacturing Co Ltd 功能描述: |
| LFTC-1350 | 制造商:MINI 制造商全称:Mini-Circuits 功能描述:Low Pass Filter(DC to 1350 MHz) |
| LFTC-1350+ | 制造商:Mini-Circuits 功能描述: |
| LFTC15N19E0897B | 制造商:Murata Manufacturing Co Ltd 功能描述:USE PN LFL21897MTC1A017 - Tape and Reel |
| LFTC15N19E0915B | 制造商:Murata Manufacturing Co Ltd 功能描述:USE PN LFL21915MTC1A027 - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。