- 您现在的位置：买卖IC网 > PDF目录11458 > LF07WBJ-3P (Hirose Electric Co Ltd)CONN JACK WATERPROOF 3POS MALE PDF资料下载
参数资料
| 型号： | LF07WBJ-3P |
| 厂商： | Hirose Electric Co Ltd |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | CONN JACK WATERPROOF 3POS MALE |
| 产品培训模块： | HRS Waterproof Connector LF Waterproof Metal Circular Connector |
| 产品目录绘图： | LF Series Jack Male |
| 特色产品： | Hirose LF Series |
| 标准包装： | 50 |
| 系列： | LF |
| 连接器类型： | 插孔，公引脚 |
| 位置数： | 3 |
| 外壳尺寸 - 插件： | 7 |
| 安装类型： | 自由悬挂 |
| 端子： | 焊接 |
| 紧固型： | 插销锁 |
| 方向： | 带标记 |
| 防护等级： | IP68 - 防尘，防水 |
| 外壳材料，表面处理： | 锌，镀镍 |
| 触点表面涂层： | 金 |
| 特点： | 屏蔽 |
| 包装： | 散装 |
| 额定电流： | 5A |
| 电压 - 额定： | 125VAC，175VDC |
| 工作温度： | -25°C ~ 85°C |
| 产品目录页面： | 412 (CN2011-ZH PDF) |
| 配套产品： | HR542-ND - CONN PLUG WATERPROOF 3POS FEMALE |
| 其它名称： | *LF07WBJ-3P HR537 |
LF Series q this catalog is reference only. Please
The product information Miniature Waterproof Shielded Connectors request the Engineering Drawing for the most current and accurate design information.
No.
Illustration
Operation
5
5
Forming cavity
Crimping tool
5
Both sides of the shielding clamp must be
placed in the forming cavity of the tool
(as shown on the illustration) and crimped
over the cable by closing the tool completely.
Crimping tool Forming cavity
Applicable cable
diameter
Shielding clamp
diameter after crimping
HR10A-TC-02
LF-TC-01
5.3
7.0
7.9
9.1
5mm
–––
7.3mm
8.7mm
5.3mm to
5.5mm
–––
7.9mm to
8.1mm
9.1mm to
9.3mm
6
1
,
2
Threaded section
Backshell
Connector Assembly
1 Place the body/insulator assembly in the
applicable solder termination fixture.
For plug assembly
Fixture Part No.
LF07BP-T01
LF10BP-T01
LF13BP-T01
For jack assembly
Fixture Part No.
LF07BJ-T01
LF10BJ-T01
LF13BJ-T01
Applicable connector
LF07WBP-6S,6P,3S,3P
LF10WBP-4S,4P,12S,12P
LF13WBP-20S,20P,11S,11P
Applicable connector
LF07WBJ-6S,6P,3S,3P
LF10WBJ-4S,4P,12S,12P
LF13WBJ-20S,20P,11S,11P
Wrench width : D
2
Coat the thread section of the body/insulator
assembly with Loctite 271 compound
Table 6 (Recommend tightening torgue)
Shell size Tightening torque Wrench width
LF07 1N·m~1.5N·m 10mm
LF10 1N·m~1.5N·m 13mm
(manufactured by Henckel Japan, Ltd.) or
equivalent, tightening it with a torque
specified in the table 6.
Note
It is critical that the cable itself will not turn or
LF13
1.5N·m~2N·m
16mm
twist during this operation.
It may cause breakage at the soldered area.
3
,
4
Seal bushing
3
Slide forward the seal bushing and insert it in
the backshell until fully seated.
Strain relief collar
4
Slide forward the strain relief collar and insert
it in the backshell, making sure that the
opposing protrusions fit inside the
corresponding grooves, as shown on the
illustration.
Groove
Protrusion
Tightening collar
Note
It is critical that the protrusions are inside the
corresponding grooves.
It may cause breakage, when a tightening collar is assembled.
5
Threaded section
Tightening collar
5
Verify that the Locktite 7649 primer
(or equivalent) on the threaded sections of the
backshell and tightening collar are dry.
Apply the Locktite 271 compound to the
tightening collar’s threaded section and attach
it to the backshell.
12
相关PDF资料 |
PDF描述 |
|---|---|
| PAG.M0.2GL.AC52G | CONN PLUG 2POS STRGHT PIN SOLDER |
| PIC16F628-20E/SS | IC MCU FLASH 2KX14 20-SSOP |
| PIC16LC62BT-04/SO | IC MCU OTP 2KX14 PWM 28SOIC |
| PIC16LC62B-04/SS | IC MCU OTP 2KX14 PWM 28SSOP |
| PIC24F16KA304-E/MV | IC MCU 16B 16KB FLASH 48UQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LF07-WBJ-3S | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors |
| LF07WBJ-3S | 功能描述:标准环形连接器 3P JACK SHELL SZ 7 FEM AU TERM IP67 RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值: |
| LF07-WBJ-4P | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors |
| LF07-WBJ-4S | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors |
| LF07-WBJ-6P | 制造商:HRS 制造商全称:HRS 功能描述:Miniature Waterproof Shielded Connectors |
发布紧急采购，3分钟左右您将得到回复。