参数资料
型号: LICAL-TRC-MT
厂商: Linx Technologies Inc
文件页数: 13/44页
文件大小: 0K
描述: IC TRANSCODER MT BI-DIR 20-SSOP
特色产品: MT Series Transcoder
标准包装: 1
系列: MT
类型: 数据代码转换器
应用: 警报系统,通信系统
电压 - 电源,模拟: 2.0 V ~ 5.5 V
安装类型: 表面贴装
封装/外壳: 20-SSOP(0.209",5.30mm 宽)
供应商设备封装: 20-SSOP
包装: 标准包装
其它名称: LICAL-TRC-MTDKR
16
Receive Mode
When a rising edge is seen on the TR_DATA line, the transcoder enters
Receive Mode. It then looks for a valid packet, meaning that there are no
errors and that the received address matches one that is saved in memory.
In addition, if Targeted Device Addressing is enabled, then the received
targeted address must match the transcoder’s local address. If no valid
data is received within 16 or 32mS (dependent on the selected baud rate)
then Receive Mode is exited. If there is a match, then the transcoder pulls
the MODE_IND line high as an indication that a valid signal was received. It
compares the received commands to the Control Permissions associated
with the transcoder that sent the signal, and reproduces the states of the
authorized status lines on the originating transcoder on its own status lines.
If Confirmation is enabled, the transcoder then pulls the TR_SEL line high
to place the transceiver into transmit mode and sends a confirmation to the
originating transcoder. It also outputs the ID of the originating transcoder, a
Command Byte that represents the states of the status lines, and a custom
data byte programmed by the user. It then looks for the next valid data
packet. If, at any time, an error or an unknown address is detected,
then the transcoder ignores the packet and looks for the next one. If the
131mS timer runs out before any valid packets are received, then the
transcoder goes back to sleep.
TX ID
The transcoder outputs an eight-bit binary number on the SER_IO line
to identify which learned transcoder sent the transmission. The number
normally corresponds to the order in which the transcoder was learned, so
the first transcoder learned will get number ‘1’, the second will get number
‘2’, and so on. An exception arises when the memory is full, in which case
the first numbers are overwritten as described in the Learn Mode section.
An exception also arises if the serial interface is used to write an address
to a specific location in memory. The TX ID is output with the Status and
Custom Data bytes after every valid packet that is received, as described in
the Serial Output section.
相关PDF资料
PDF描述
LT1331CNW#PBF IC TXRX 5V/3V RS232 28-DIP
LT1341CG#TRPBF IC TXRX 5V RS232 SHUTDOWN 28SSOP
LT1342CG IC TXRX 5V RS232 W/3VLOGC 28SSOP
LT1794CSW#PBF IC OPAMP 200MHZ DUAL 20-SOIC
LT6301IFE IC XDSL LINE DRIVER DUAL 28TSSOP
相关代理商/技术参数
参数描述
LI-CAM-AR0331 功能描述:视频模块 Aptina AR0331 HD WDR CAMERA BOARD RoHS:否 制造商:Leopard Imaging 产品:Camera Modules 支持的视频格式:H.264, MPEG4, MJPEG 每秒帧数:30 显示分辨率—像素:1920 x 1080 接口类型:RS-485, USB 工作电源电压:12 V 最大工作温度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm
LI-CAM-AR0331-324-1.8 功能描述:视频模块 Aptina AR0331 IP CAMERA BOARD RoHS:否 制造商:Leopard Imaging 产品:Camera Modules 支持的视频格式:H.264, MPEG4, MJPEG 每秒帧数:30 显示分辨率—像素:1920 x 1080 接口类型:RS-485, USB 工作电源电压:12 V 最大工作温度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm
LI-CAMFLEX 功能描述:程序设计器配件 2" CAMERA EXTENSION CABLE RoHS:否 制造商:Lattice 产品:ispDOWNLOAD Cables 用于:In-system Programming
LI-CAM-IMX036 功能描述:视频模块 Sony iMX036 HD IP CAMERA BOARD RoHS:否 制造商:Leopard Imaging 产品:Camera Modules 支持的视频格式:H.264, MPEG4, MJPEG 每秒帧数:30 显示分辨率—像素:1920 x 1080 接口类型:RS-485, USB 工作电源电压:12 V 最大工作温度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm
LI-CAM-IMX036-1.8 功能描述:视频模块 Sony IMX036 IP CAMERA BOARD RoHS:否 制造商:Leopard Imaging 产品:Camera Modules 支持的视频格式:H.264, MPEG4, MJPEG 每秒帧数:30 显示分辨率—像素:1920 x 1080 接口类型:RS-485, USB 工作电源电压:12 V 最大工作温度:+ 45 C 尺寸:113.3 mm x 57.6 mm x 32.2 mm