47
The following data includes information pertaining to the application
tools which have been established for crimping, inserting, and
removing the size 12, 16, 20, 22, 22D and 22M contacts incorpo-
rated in the JT-R, LJT-R and MIL-C-38999 (MS) series connectors
as applicable.
All crimping tools included are the “full cycling” type and when used
as specified in the installation instructions (L-624 and L-844 cover-
ing the JT-R, LJT-R and MS series connectors will provide reliable
crimped wire to contact terminations. There is a possibility of addi-
tional crimping tools other than those included being available at
present or in the future for this specific application.
For additional information on coaxial contacts, consult Amphenol
catalog section 12-130.
JT/LJT
application tools
Contact
Size/Type
Crimping
Tool
Turret Die
or Positioner
12 Pin and Socket
M22520/1-01
M22520/1-04
16 Pin and Socket
M22520/1-01
M22520/7-01
M22520/1-04
M22520/7-04
20 Pin and Socket
M22520/1-01
M22520/2-01
M22520/7-01
M22520/1-04
M22520/2-10
M22520/7-08
22, 22D, 22M Pin
M22520/2-01
M22520/7-01
M22520/2-09
M22520/7-07
22, 22D, 22M Socket (LJT-R)
M22520/2-01
M22520/7-01
M22520/2-07
M22520/7-05
22D Socket (JT-R)
M22520/2-01
M22520/7-01
M22520/2-06
M22520/7-06
8 Twinax Center Pin and Socket
M22520/2-01
M22520/2-37
8 Twinax Intermediate
Outer Pin & Socket
M22520/5-01
M22520/5-200
Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above
crimping tools and positioners are available from the approved tool manufacturer.
Contact
Size/Type
Crimping
Tool
Turret Die
or Positioner
8 Coaxial Inner Pin and Socket
M22520/2-01
M22520/2-31
8 Coaxial Outer Pin
and Socket
M22520/5-01
M22520/5-05
Die Closure B
M22520/5-01
M22520/5-41
Die Closure B
M22520/10-01
M22520/10-07
Die Closure B
16 Coaxial Inner
Pin and Socket
M22520/2-01
M22520/2-35
16 Coaxial Outer
Pin and Socket
M22520/4-01
M22520/4-02
12 Coaxial Inner Pin and Socket
M22520/2-01
M22520/2-34
12 Coaxial Outer Pin and Socket
M22520/31-01
M22520/31-02
10 (Power)
INSERTION TOOLS
Use with
Contact Size
Plastic Tools
Metal Tools
Part Number
Color
Code
Angle Type
Straight Type
Proprietary
Part Number
Color
Code
MS
Part Number
Proprietary
Part Number
10 (Power)
M81969/14-05*
Gray/White
M81969/8-11
Green
12
M81969/14-04*
Yellow/(White)
M81969/8-09
11-8674-12
11-8794-12
Yellow
16
M81969/14-03*
Blue/(White)
M81969/8-07
11-8674-16
11-8794-16
Blue
20
M81969/14-10*
Red/(Orange)
M81969/8-05
11-8674-20
11-8794-20
Red
22
M81969/14-09
Brown/(White)
M81969/8-03
11-8674-22
11-8794-22
Brown
22D, 22M
M81969/14-01*
Green/(White)
M81969/8-01
11-8674-24
11-8794-24
Black
8 Coaxial
None Required
8 Twinax
None
M81969/46-06**
None
Red
REMOVAL TOOLS
Use with
Contact Size
Plastic Tools
Metal Tools
Part Number
Color
Code
For Unwired Contacts
Proprietary
Part Number
Angle Type
Straight Type
Proprietary
Part Number
Color
Code
MS
Part Number
Proprietary
Part Number
10 (Power)
M81969/14-05*
(Green)/White
M81969/8-12
Green/White
12
M81969/14-04*
(Yellow)/White
11-10050-11
M81969/8-10
11-8675-12
11-8795-12
Yellow/White
16
M81969/14-03*
(Blue)/White
11-10050-10
M81969/8-08
11-8675-16
11-8795-16
Blue/White
20
M81969/14-10*
(Red)/Orange
11-10050-9
M81969/8-06
11-8675-20
11-8795-20
Red/White
22
M81969/14-09*
(Brown)/White
11-10050-8
M81969/8-04
11-8675-22
11-8795-22
Brown/White
22D, 22M
M81969/14-01*
(Green)/White
11-10050-7
M81969/8-02
11-8675-24
11-8795-24
Black/White
8 Coaxial
M81969/14-12
Green
None
11-9170
DRK264-8
N/A
8 Twinax
M81969/14-12
Green
None
M81969/46-12**
11-9170
N/A
CRIMPING TOOLS
The M81969/8, 11-8674, 11-8675, and 11-8794 metal contact insertion and removal
tools will accommodate wires having the maximum outside diameter as follows:
Contact size 12– .155, 16– .109, 20– .077, 22, 22D, 22M– .050. When wire diame-
ters exceed those specified, the plastic tools must be used.
* Double ended insertion/removal tool.
** Twinax insertion and removal tools are available only in a straight
type, metal version.
To be determined
Contact Daniels Manufacturing Co. for availability.