- 您现在的位置：买卖IC网 > PDF目录79876 > LK2660-7EPD1T (POWER-ONE INC) 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | LK2660-7EPD1T |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| 封装： | HEAT SINK, METAL, CASE K02, MODULE |
| 文件页数： | 15/26页 |
| 文件大小： | 1027K |
| 代理商： | LK2660-7EPD1T |
Cassette Style
AC-DC Converters
K Series
Edition 5/5.2000
22/26
Vo1+
Vo1–
D
UD
ID
Rp
Input
11007
NPN output (D5...DD):
Connector pin D is internally connected via the collector-
emitter path of a NPN transistor to the negative potential of
output 1.
UD
< 0.4 V (logic low) corresponds to a monitored
voltage level (
Ui and/or Uo1)
> U
t + Uh. The current ID
through the open collector should not exceed 20 mA. The
NPN output is not protected against external overvoltages.
UD should not exceed 40 V.
Ui, Uo1 status
D output,
UD
Ui or Uo1 < Ut
high, H,
ID ≤ 25 A at UD = 40 V
Ui and Uo1 > Ut + Uh
low, L,
UD ≤ 0.4 V at ID = 20 mA
Vo1+
Vo1–
D
UD
ID
Rp
Input
11006
Fig. 33
Option D0...D4: JFET output, ID
≤ 2.5 mA
JFET output (D0…D4):
Connector pin D is internally connected via the drain-
source path of a JFET (self-conducting type) to the negative
potential of output 1.
UD
≤ 0.4 V (logic low) corresponds to a
monitored voltage level (
Ui and/or Uo1)
<U
t. The current ID
through the JFET should not exceed 2.5 mA. The JFET is
protected by a 0.5 W Zener diode of 8.2 V against external
overvoltages.
Ui, Uo1 status
D output,
UD
Ui or Uo1 < Ut
low, L,
UD ≤ 0.4 V at ID = 2.5 mA
Ui and Uo1 > Ut + Uh
high, H,
ID ≤ 25 A at UD = 5.25 V
Fig. 34
Option D5...DD: NPN output, Uo1
≤ 40 V, I
D
≤ 20 mA
Threshold tolerances and hysteresis:
If
Ui is monitored, the internal input voltage after the input
filter and rectifier is measured. Consequently this voltage
differs from the voltage at the connector pins by the voltage
drop
U
ti across input filter and rectifier. The threshold lev-
els of the D0 and D9 options are factory adjusted at nomi-
nal output current
Io nom and at TA = 25°C. The value of Uti
depends upon the threshold level
Ut, temperature and input
current. The input current is a function of the input voltage
and the output power.
Fig. 35
Definition of Uti, DUti and DUhi (JFET output)
Table 19: D-output logic signals
Version of D
Ui < Ut resp. Uo < Ut
Ui > Ut + Uh resp. Uo > Ut
Configuration
D1, D2, D3, D4, D0
low
high
JFET
D5, D6, D7, D8, D9, DD
high
low
NPN
DUti
Uhi
UD low
UD
UD high
Ui
P
o
=
P
o
nom
P
o
=
0
P
o
=
0
Uti
P
o
=
P
o
nom
11021
相关PDF资料 |
PDF描述 |
|---|---|
| LK2660-7EPD4TB1 | 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK2660-7EPD9B2 | 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK2660-7ERD7B2 | 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK2660-9PD0T | 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
| LK2660-9PD7B2 | 2-OUTPUT 150 W AC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LK2660-7ERT | 制造商:Power-One 功能描述:AC DC - Bulk |
| LK2660-7R | 功能描述:线性和开关式电源 Euro-Cassette 150W (2x 24V) RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| LK2660-9ER | 制造商:Power-One 功能描述:ACDC - Bulk |
| LK28 | 制造商:Molex 功能描述:BOX, LINE FEED 4D/PRF |
| LK28-LAS-F1-Z/31/116 | 制造商:PEPPERL+FUCHS 功能描述:SENSOR, PHOTOELECTRIC, UNIVERSAL STYLE, THRU-BEAM RECEIVER, SENSING DIS 300M 制造商:PEPPERL+FUCHS 功能描述:Photoelectric (Automation) |
发布紧急采购，3分钟左右您将得到回复。