参数资料
型号: LK5320-7D0T
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
封装: HEAT SINK, METAL, CASE K02
文件页数: 1/28页
文件大小: 1215K
代理商: LK5320-7D0T
Rugged Environment
AC-DC Converters >100 Watt
K Series
Edition 4/4.99
1/28
MELCHER
The Power Partners.
150 Watt AC-DC Converters with PFC
K-Series
Input to output isolation
Single output:
LK 4000 5.1, 12, 15, 24 V
Double output: LK 5000 2
× 12, 2 × 15, 2 × 24 V
Universal input voltage range
Power factor
>0.95, harmonics <IEC/EN 61000-3-2
Input over- and undervoltage lock-out
Efcient input lter and built-in surge and transient
suppression circuitry
4 kVrms input to output electric strength test
Fully isolated outputs
Outputs overload, open- and short-circuit proof
No derating over entire operating temperature range
Safety according to IEC/EN 60950
C
Table of Contents
Page
Summary .......................................................................... 1
Type Survey and Key Data .............................................. 2
Type Key .......................................................................... 2
Functional Description ...................................................... 3
Electrical Input Data ......................................................... 4
Electrical Output Data ...................................................... 6
Auxiliary Functions ......................................................... 12
Summary
The K 4000/5000-series of AC-DC converters represents a
exible range of power supplies for use in advanced elec-
tronic systems. Features include full power factor correc-
tion, high efciency, high reliability, low output voltage noise
and excellent dynamic response to load/line changes.
The converter inputs are protected against surges and tran-
sients occurring at the source lines. An input over- and
undervoltage lock-out circuitry disables the outputs if the
input voltage is outside the specied ranges. Inrush current
limitation is included preventing circuit breakers and fuses
from being damaged at switch-on.
All outputs are overload, open- and short-circuit proof and
are protected against overvoltages by means of a built-in
suppressor diode. The outputs can be inhibited by a logic
signal applied to the connector pin 18 (i). If the inhibit func-
tion is not used pin 18 must be connected with pin 14 to en-
able the outputs.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to the international safety standards
IEC/EN 60950 and have been approved by the safety
agencies LGA (Germany) and UL (USA). The UL Mark for
Canada has been ofcially recognized by regulatory au-
thorities in provinces across Canada.
The case design allows operation at nominal load up to
71
°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71
°C but
the case temperature must remain below 95
°C under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
TC exceeds
the limit. The outputs are automatically re-enabled when
the temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19 inch rack sys-
tems according to DIN 41494, or be chassis mounted.
Important: These products are intended to replace the
LK 1000 and LK 2000 in order to comply with IEC/EN
61000-3-2.
LGA
Page
Electromagnetic Compatibility (EMC) ............................ 16
Immunity to Environmental Conditions ........................... 17
Mechanical Data ............................................................ 18
Safety and Installation Instructions ................................ 19
Description of Options .................................................... 22
Accessories .................................................................... 28
168
6.6"
80
3.2"
16 TE
111
4.4"
3 U
相关PDF资料
PDF描述
LK5320-7D8T 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7DDT 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7EPD0T 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7EPD6B2 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
LK5320-7PD0 2-OUTPUT 150 W AC-DC PWR FACTOR CORR MODULE
相关代理商/技术参数
参数描述
LK5320-7R 功能描述:线性和开关式电源 Euro-Cassette 144W (2x 12V) RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度:
LK5320-9ER 制造商:Power-One 功能描述:AC/DC PS DUAL-OUT 12V/12V 6A/6A 280W 15PIN - Bulk
LK-54H-SS18(LF)(SN) 制造商:JST Manufacturing 功能描述:
LK5540-7R 功能描述:线性和开关式电源 150W 15V 5A OUT AC-DC CONVERTER RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度:
LK5540-9ER 制造商:Power-One 功能描述:ACDC - Bulk